Re: Transition Glitch

Recently I did a video and used the page curl transition in it about 10
times in a row.... I just reviewed it and don't see an issue.

The video is online. I'd be glad to give you a link if you want to check it
against what you are seeing. Just send an email.
--
PapaJohn

Movie Maker 2 - www.papajohn.org
Photo Story 2 - www.photostory.papajohn.org

..
"Bruff" <Bruff@discussions.microsoft.com> wrote in message
news:163DE3D9-8B60-4F80-AB15-C0F3D8C23ED4@microsoft.com...
> Has anyone had problems with glitches in the transitions, specifically the
page curl ones. When I finalize my movie right before the transition, the
picture jerks down diagonally down to the left (the whole frame moves about
a quarter of an inch) or diagonally up to the right. It happens on every
frame through the movie that has this transition. I thought it might be a
hardware issue because I have an AMD 900 MHz with 768 MB RAM. But I also
tried it on a laptop 1.8 GHz with 256 MB Ram. Then took it to work and
tried it on computer at work. (2.4 GHz with 1 GB RAM). All three movies
turned out the same with the jumps in the transitions. Anyone have this
problem or a solution? Is it a software defect?

"PapaJohn \(MVP\)" <PapaJohn@CharterMI.net> wrote in message news:<10e5uo3gt0p7uc3@corp.supernews.com>...
> Recently I did a video and used the page curl transition in it about 10
> times in a row.... I just reviewed it and don't see an issue.
>
> The video is online. I'd be glad to give you a link if you want to check it
> against what you are seeing. Just send an email.
> --
> PapaJohn
>
> Movie Maker 2 - www.papajohn.org
> Photo Story 2 - www.photostory.papajohn.org
>
> .
> "Bruff" <Bruff@discussions.microsoft.com> wrote in message
> news:163DE3D9-8B60-4F80-AB15-C0F3D8C23ED4@microsoft.com...
> > Has anyone had problems with glitches in the transitions, specifically the
> page curl ones. When I finalize my movie right before the transition, the
> picture jerks down diagonally down to the left (the whole frame moves about
> a quarter of an inch) or diagonally up to the right. It happens on every
> frame through the movie that has this transition. I thought it might be a
> hardware issue because I have an AMD 900 MHz with 768 MB RAM. But I also
> tried it on a laptop 1.8 GHz with 256 MB Ram. Then took it to work and
> tried it on computer at work. (2.4 GHz with 1 GB RAM). All three movies
> turned out the same with the jumps in the transitions. Anyone have this
> problem or a solution? Is it a software defect?

Please check http://www.vizros.com/gallery.html for page curl.