WinXP Setup from diskettes

Has anyone seen this situation when loading XP from the 6
diskette files created after downloading the zip file from
Microsoft:

On Diskette 3 load I get the message:

File setupdd.sys could not be loaded. The error code is 9.

Setup stops at that point and I cannot go further

Do you have the correct disks for the correct Service Pack and
language?

If yes, perhaps there was a bad download.
Download and make the disks again.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


<anonymous@discussions.microsoft.com> wrote in message
news:fea601c43eab$62c4a240$a501280a@phx.gbl...
> Has anyone seen this situation when loading XP from the 6
> diskette files created after downloading the zip file from
> Microsoft:
>
> On Diskette 3 load I get the message:
>
> File setupdd.sys could not be loaded. The error code is 9.
>
> Setup stops at that point and I cannot go further

Windows XP Problems with Damaged or Incompatible Hardware
http://support.microsoft.com/defaul...1&Product=winxp

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/defaul...kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

--------------------------------------------------------------------------

<anonymous@discussions.microsoft.com> wrote in message:
news:fea601c43eab$62c4a240$a501280a@phx.gbl...

| Has anyone seen this situation when loading XP from the 6
| diskette files created after downloading the zip file from
| Microsoft:
|
| On Diskette 3 load I get the message:
|
| File setupdd.sys could not be loaded. The error code is 9.
|
| Setup stops at that point and I cannot go further

Interestingly, I can load those diskettes on another
system without a problem...
>-----Original Message-----
>Do you have the correct disks for the correct Service
Pack and
>language?
>
>If yes, perhaps there was a bad download.
>Download and make the disks again.
>
>--
>Jupiter Jones [MVP]
>http://www3.telus.net/dandemar/
>
>
><anonymous@discussions.microsoft.com> wrote in message
>news:fea601c43eab$62c4a240$a501280a@phx.gbl...
>> Has anyone seen this situation when loading XP from the
6
>> diskette files created after downloading the zip file
from
>> Microsoft:
>>
>> On Diskette 3 load I get the message:
>>
>> File setupdd.sys could not be loaded. The error code is
9.
>>
>> Setup stops at that point and I cannot go further
>
>
>.
>

Hello,

Where can I get these Disk's?

>-----Original Message-----
>Do you have the correct disks for the correct Service
Pack and
>language?
>
>If yes, perhaps there was a bad download.
>Download and make the disks again.
>
>--
>Jupiter Jones [MVP]
>http://www3.telus.net/dandemar/
>
>
><anonymous@discussions.microsoft.com> wrote in message
>news:fea601c43eab$62c4a240$a501280a@phx.gbl...
>> Has anyone seen this situation when loading XP from
the 6
>> diskette files created after downloading the zip file
from
>> Microsoft:
>>
>> On Diskette 3 load I get the message:
>>
>> File setupdd.sys could not be loaded. The error code
is 9.
>>
>> Setup stops at that point and I cannot go further
>
>
>.
>

Does the other system have the exact same OS including Service Pack?
Possibly your floppy reader is defective.

Why are you using the floppies?
All retail Windows XP CDs are bootable.
All you need to do is set the BIOS to boot to CD.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


<anonymous@discussions.microsoft.com> wrote in message
news:fdbb01c43ead$d34930b0$a101280a@phx.gbl...
> Interestingly, I can load those diskettes on another
> system without a problem...
> >-----Original Message-----
> >Do you have the correct disks for the correct Service
> Pack and
> >language?
> >
> >If yes, perhaps there was a bad download.
> >Download and make the disks again.
> >
> >--
> >Jupiter Jones [MVP]
> >http://www3.telus.net/dandemar/
> >
> >
> ><anonymous@discussions.microsoft.com> wrote in message
> >news:fea601c43eab$62c4a240$a501280a@phx.gbl...
> >> Has anyone seen this situation when loading XP from the
> 6
> >> diskette files created after downloading the zip file
> from
> >> Microsoft:
> >>
> >> On Diskette 3 load I get the message:
> >>
> >> File setupdd.sys could not be loaded. The error code is
> 9.
> >>
> >> Setup stops at that point and I cannot go further
> >
> >
> >.
> >

Chris;
You need to make them:
http://support.microsoft.com/?kbid=310994

You need to make the correct disks based on Windows language and
Service pack.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"Chris" <NIZZIL_DO_87@hotmail.com> wrote in message
news:fec101c43eae$0e1c64f0$a001280a@phx.gbl...
> Hello,
>
> Where can I get these Disk's?
>
> >-----Original Message-----
> >Do you have the correct disks for the correct Service
> Pack and
> >language?
> >
> >If yes, perhaps there was a bad download.
> >Download and make the disks again.
> >
> >--
> >Jupiter Jones [MVP]
> >http://www3.telus.net/dandemar/
> >
> >
> ><anonymous@discussions.microsoft.com> wrote in message
> >news:fea601c43eab$62c4a240$a501280a@phx.gbl...
> >> Has anyone seen this situation when loading XP from
> the 6
> >> diskette files created after downloading the zip file
> from
> >> Microsoft:
> >>
> >> On Diskette 3 load I get the message:
> >>
> >> File setupdd.sys could not be loaded. The error code
> is 9.
> >>
> >> Setup stops at that point and I cannot go further
> >
> >
> >.
> >