PC Review
Forums
Newsgroups
Windows XP
Windows XP Setup
Unable to run sysprep on XP image
Forums
Newsgroups
Windows XP
Windows XP Setup
Unable to run sysprep on XP image
![]() |
Unable to run sysprep on XP image |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
Setting up an XP image for deployment and have base
computer built but when I attempt to run sysprep I get an error titled 'sysprep.exe - Entry Point not found' with text below stating 'The procedure entry point EnablePriveledge could not be located in the dynamic link library SETUPAPI.DLL'. I need to get the image created and ghost several machines but cannot get the image to work. The OS was installed from a network share of a bulk license purchased by the University. Help! |
|
|
|
#2 |
|
Guest
Posts: n/a
|
Ed,
Make sure you are running the right sysprep. You can download the latest version from the following location http://www.microsoft.com/WindowsXP/.../sp1/deploytool s.asp Scott McArthur[MS] Microsoft Windows Server Setup Support This posting is provided "AS IS" with no warranties, and confers no rights -------------------- | Content-Class: urn:content-classes:message | From: "Ed" <ekipp@ucsd.edu> | Sender: "Ed" <ekipp@ucsd.edu> | Subject: Unable to run sysprep on XP image | Date: Thu, 2 Oct 2003 12:30:29 -0700 | Lines: 9 | Message-ID: <06c101c3891b$a3601050$a401280a@phx.gbl> | MIME-Version: 1.0 | Content-Type: text/plain; | charset="iso-8859-1" | Content-Transfer-Encoding: 7bit | X-Newsreader: Microsoft CDO for Windows 2000 | X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 | Thread-Index: AcOJG6NgXhSH67YqRlyBPeuwsWDi1Q== | Newsgroups: microsoft.public.windowsxp.setup_deployment | Path: cpmsftngxa06.phx.gbl | Xref: cpmsftngxa06.phx.gbl microsoft.public.windowsxp.setup_deployment:86454 | NNTP-Posting-Host: TK2MSFTNGXA12 10.40.1.164 | X-Tomcat-NG: microsoft.public.windowsxp.setup_deployment | | Setting up an XP image for deployment and have base | computer built but when I attempt to run sysprep I get an | error titled 'sysprep.exe - Entry Point not found' with | text below stating 'The procedure entry point | EnablePriveledge could not be located in the dynamic link | library SETUPAPI.DLL'. I need to get the image created | and ghost several machines but cannot get the image to | work. The OS was installed from a network share of a | bulk license purchased by the University. Help! | |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

