Re: PCI Compliance Test - FAIL 4:63:18

Hello,

Yes, for Systems type submissions its contingency ID #495.

For storage its contingency ID #610.

Its basically a duplicate contingency.



Thank you,

Loren Mikola [MSFT]



When I'm running the PCI Compliance Test the following
error appears:
FAIL 4:63:18 - The Secondary Bus Reset bit in the Bridge
Control Register must be read/write

I've already search the HCT 11.2 Errata's for this issue,
but there's none. The only thing that I've found was a
paper from Intel, from 18 March 2003, for the Intel®
Server Board SE7505VB2 SATA, that describes this error as
being the Contingency ID 610, and in the solution refers
that "This is an acceptable failure for all Intel ICH
chipsets for the Windows XP and Windows Server 2003
logo's. Refer to Contingency 610 included in this
submission for additional details of above acceptable
failure."

Is this in fact an acceptable failure?