Easy CD creator 4

Kenneth,
Did you solve the driver problem?
I am in the almost exact situation and have not been able
to figure it out.
Any input would be great.

thanks.
>-----Original Message-----
>hey guys i would really appreciate it if someone could
>help me on this..
>i got a bargain PC from best buy.. VPR Matrix. i have
>since installed proper cd burning software on it. but
>initially it came without one. i also have a compaq
>laptop and easy cd creator 4 was bundled with it.
>naturally i popped it in my windows xp home edition
>machine. without any warnings, it installed but a
>registration key was required in order for me to use
>anything faster than 4x burning. i uninstalled it. but
>ever since then each time i start my machine a balloon
>pops up on the taskbar saying "cd creating software will
>cause conflicts with windows and has not been loaded"
>
>the CDr drive works fine with musicmatch and media
player
>its just the message that bugs me. i isolated the
problem
>to a driver that easy cd creator installed. because its
>licensed to them and all. but when i remove that driver
>both my dvd drive and CDr drive dissappear from my
>hardware list.
>
>can anyone help me with resolving this issue,
>suggestions? a replacement driver?, how to remove the
>driver and still be able to use my cd and dvd drives???
>
>SOFTWARE: easy cd creator v4.02
>DRIVER: C:\WINDOWS\System32\drivers\CDRALW2K.sys
>CDr DRIVE: NEC CD-RW NR-9200a
>OS: Windows XP home edition
>this driver is also listed under
installed : "CDR4_2k.sys"
>but it doesnt have any faults and it is licenced to
>adaptec. makers or easy cd creator
>.
>

www.roxio.com

EZCD 4.0 is not compatible with XP. EZCD 5 and 6 are.

Cari
www.coribright.com

"Tab" <ddot7@mindspring.com> wrote in message
news:054e01c33f84$3295fff0$a501280a@phx.gbl...
> Kenneth,
> Did you solve the driver problem?
> I am in the almost exact situation and have not been able
> to figure it out.
> Any input would be great.
>
> thanks.
> >-----Original Message-----
> >hey guys i would really appreciate it if someone could
> >help me on this..
> >i got a bargain PC from best buy.. VPR Matrix. i have
> >since installed proper cd burning software on it. but
> >initially it came without one. i also have a compaq
> >laptop and easy cd creator 4 was bundled with it.
> >naturally i popped it in my windows xp home edition
> >machine. without any warnings, it installed but a
> >registration key was required in order for me to use
> >anything faster than 4x burning. i uninstalled it. but
> >ever since then each time i start my machine a balloon
> >pops up on the taskbar saying "cd creating software will
> >cause conflicts with windows and has not been loaded"
> >
> >the CDr drive works fine with musicmatch and media
> player
> >its just the message that bugs me. i isolated the
> problem
> >to a driver that easy cd creator installed. because its
> >licensed to them and all. but when i remove that driver
> >both my dvd drive and CDr drive dissappear from my
> >hardware list.
> >
> >can anyone help me with resolving this issue,
> >suggestions? a replacement driver?, how to remove the
> >driver and still be able to use my cd and dvd drives???
> >
> >SOFTWARE: easy cd creator v4.02
> >DRIVER: C:\WINDOWS\System32\drivers\CDRALW2K.sys
> >CDr DRIVE: NEC CD-RW NR-9200a
> >OS: Windows XP home edition
> >this driver is also listed under
> installed : "CDR4_2k.sys"
> >but it doesnt have any faults and it is licenced to
> >adaptec. makers or easy cd creator
> >.
> >