PC Review
Forums
Newsgroups
Windows XP
Windows XP Embedded
Re: SanDisk compact flash's firmware or controller out of date?
Forums
Newsgroups
Windows XP
Windows XP Embedded
Re: SanDisk compact flash's firmware or controller out of date?
![]() |
Re: SanDisk compact flash's firmware or controller out of date? |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
You might try reading the following:
http://www.sandisk.com/pdf/oem/AppNoteCFHostv1.0.pdf This helps with optimizing CF for host operation. Also, if you are using EWF, make sure the CF is not marked "removable" Here is an article on that: http://groups.google.com/groups?q=C...soft.com&rnum=1 HTH, JC -- JC- BSquare Corp. If you wish to reply directly to me, remove the <nospam_ > from the address. "Ju" <Ju@discussions.microsoft.com> wrote in message news:08368412-3BCE-45DA-8767-46AD429D1DC8@microsoft.com... >I have XP Embedded running on a SanDisk compact flash with EWF. Occationaly > in the windows system event log, there are atapi error ID 9. And sometime > in > a worst case scenario atapi error id 11 and 26 occurs. Does anybody know > of > firmware or controller conflict in xp embedded for CF? Or is this normal > operation? > > Thank you. > > Ju |
|
|
|
#2 |
|
Guest
Posts: n/a
|
Hum, I run RAM EWF and I do FBA on the CF - My development CF and I have
used it for a year without any problems. It's not marked as fixed either. "JC" <JCBSQ@nospam_yahoo.com> wrote in message news:eBEyP9QkEHA.1048@tk2msftngp13.phx.gbl... > You might try reading the following: > > http://www.sandisk.com/pdf/oem/AppNoteCFHostv1.0.pdf > > This helps with optimizing CF for host operation. Also, if you are using > EWF, make sure the CF is not marked > "removable" Here is an article on that: > http://groups.google.com/groups?q=C...soft.com&rnum=1 > > > HTH, > JC > > -- > JC- BSquare Corp. > If you wish to reply directly to me, remove the <nospam_ > from the address. > "Ju" <Ju@discussions.microsoft.com> wrote in message > news:08368412-3BCE-45DA-8767-46AD429D1DC8@microsoft.com... > >I have XP Embedded running on a SanDisk compact flash with EWF. Occationaly > > in the windows system event log, there are atapi error ID 9. And sometime > > in > > a worst case scenario atapi error id 11 and 26 occurs. Does anybody know > > of > > firmware or controller conflict in xp embedded for CF? Or is this normal > > operation? > > > > Thank you. > > > > Ju > > |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

