NTDETECT.COM missing from build

Why would NTDETECT.COM be missing in my build. I built an
image in TD without any warnings or errors but
ntdetect.com is not in the image. Please help me.

Pete

I just noticed that this only happens when the "Build
Type" is Debug. ????


>-----Original Message-----
>Why would NTDETECT.COM be missing in my build. I built
an
>image in TD without any warnings or errors but
>ntdetect.com is not in the image. Please help me.
>
>Pete
>.
>

I take that back, it happens on both debug and release.
It seems like this started happening after I installed
some QFEs.
>-----Original Message-----
>I just noticed that this only happens when the "Build
>Type" is Debug. ????
>
>
>>-----Original Message-----
>>Why would NTDETECT.COM be missing in my build. I built
>an
>>image in TD without any warnings or errors but
>>ntdetect.com is not in the image. Please help me.
>>
>>Pete
>>.
>>
>.
>

I figured out my own problem. My bad.
>-----Original Message-----
>Why would NTDETECT.COM be missing in my build. I built
an
>image in TD without any warnings or errors but
>ntdetect.com is not in the image. Please help me.
>
>Pete
>.
>

And what was the problem at the end?

Regards,
Slobodan

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com...nity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Pete" <anonymous@discussions.microsoft.com> wrote in message
news:4f8d01c42c68$430d42e0$a101280a@phx.gbl...
> I figured out my own problem. My bad.
> >-----Original Message-----
> >Why would NTDETECT.COM be missing in my build. I built
> an
> >image in TD without any warnings or errors but
> >ntdetect.com is not in the image. Please help me.
> >
> >Pete
> >.
> >

Slobodan - Actually, I am still seeing something a
problem happen when I build a debug type build. If I set
it to debug type, my ntdetect.com does not exist. If I
build in release mode, it works fine. I'm keeping the
destination the same.

>-----Original Message-----
>And what was the problem at the end?
>
>Regards,
>Slobodan
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Have an opinion on the effectiveness of Microsoft
Embedded newsgroups? Tell
>Microsoft!
>https://www.windowsembeddedeval.com...nity/newsgroups
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>"Pete" <anonymous@discussions.microsoft.com> wrote in
message
>news:4f8d01c42c68$430d42e0$a101280a@phx.gbl...
>> I figured out my own problem. My bad.
>> >-----Original Message-----
>> >Why would NTDETECT.COM be missing in my build. I built
>> an
>> >image in TD without any warnings or errors but
>> >ntdetect.com is not in the image. Please help me.
>> >
>> >Pete
>> >.
>> >
>
>
>.
>

Pete,

It is a little confusing. Debug actually doesn't work in XPe. It's an issue
that has been noted and will probably be fixed in LHe.

HTH,
--
Brad Combs
Imago Technologies, LLC

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com...nity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Pete" <anonymous@discussions.microsoft.com> wrote in message
news:4d7801c42c6f$3e76c6a0$a601280a@phx.gbl...
>
> Slobodan - Actually, I am still seeing something a
> problem happen when I build a debug type build. If I set
> it to debug type, my ntdetect.com does not exist. If I
> build in release mode, it works fine. I'm keeping the
> destination the same.
>
> >-----Original Message-----
> >And what was the problem at the end?
> >
> >Regards,
> >Slobodan
> >
> >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >Have an opinion on the effectiveness of Microsoft
> Embedded newsgroups? Tell
> >Microsoft!
> >https://www.windowsembeddedeval.com...nity/newsgroups
> >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >"Pete" <anonymous@discussions.microsoft.com> wrote in
> message
> >news:4f8d01c42c68$430d42e0$a101280a@phx.gbl...
> >> I figured out my own problem. My bad.
> >> >-----Original Message-----
> >> >Why would NTDETECT.COM be missing in my build. I built
> >> an
> >> >image in TD without any warnings or errors but
> >> >ntdetect.com is not in the image. Please help me.
> >> >
> >> >Pete
> >> >.
> >> >
> >
> >
> >.
> >

Pete,

Debug build is not currently supported by MS for XPe. Here is a quote: "None of the shipped components have a debug version, so
selecting a "Debug"
build actually gives an incomplete runtime image.".

--
KM,
BSquare Corporation

>
> Slobodan - Actually, I am still seeing something a
> problem happen when I build a debug type build. If I set
> it to debug type, my ntdetect.com does not exist. If I
> build in release mode, it works fine. I'm keeping the
> destination the same.
>
> >-----Original Message-----
> >And what was the problem at the end?
> >
> >Regards,
> >Slobodan
> >
> >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >Have an opinion on the effectiveness of Microsoft
> Embedded newsgroups? Tell
> >Microsoft!
> >https://www.windowsembeddedeval.com...nity/newsgroups
> >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >"Pete" <anonymous@discussions.microsoft.com> wrote in
> message
> >news:4f8d01c42c68$430d42e0$a101280a@phx.gbl...
> >> I figured out my own problem. My bad.
> >> >-----Original Message-----
> >> >Why would NTDETECT.COM be missing in my build. I built
> >> an
> >> >image in TD without any warnings or errors but
> >> >ntdetect.com is not in the image. Please help me.
> >> >
> >> >Pete
> >> >.
> >> >
> >
> >
> >.
> >

Thank you all for the help.
>-----Original Message-----
>
>Slobodan - Actually, I am still seeing something a
>problem happen when I build a debug type build. If I set
>it to debug type, my ntdetect.com does not exist. If I
>build in release mode, it works fine. I'm keeping the
>destination the same.
>
>>-----Original Message-----
>>And what was the problem at the end?
>>
>>Regards,
>>Slobodan
>>
>>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>Have an opinion on the effectiveness of Microsoft
>Embedded newsgroups? Tell
>>Microsoft!
>>https://www.windowsembeddedeval.com...nity/newsgroups
>>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>"Pete" <anonymous@discussions.microsoft.com> wrote in
>message
>>news:4f8d01c42c68$430d42e0$a101280a@phx.gbl...
>>> I figured out my own problem. My bad.
>>> >-----Original Message-----
>>> >Why would NTDETECT.COM be missing in my build. I
built
>>> an
>>> >image in TD without any warnings or errors but
>>> >ntdetect.com is not in the image. Please help me.
>>> >
>>> >Pete
>>> >.
>>> >
>>
>>
>>.
>>
>.
>