Sometime include NTLDR and NTDetect.com, sometime not

When I build and XPe configuration using TA.EXE devices
output, NTLDR and NTDectect.com are included in the final
image but I have STOP 7B when I start the OS (missing PCI
or other devices). Then, I decide to use TAP.EXE devices
output to ensure that all devices are included but I
got 'DLLs loaded missing' when the OS start. NTLDR and
NTDetect.com are not included in the final image (and it
says that I should contact the administrator...snif!
that's me!). What can I do to force the inclusion of
NTDetect.com and NTLDR OR other trick to solve this
problem using TA.EXE output?

Thanks!

If you have resolved all dependencies there is no way that this component is
missing since it is required even if you don't use TA or TAP.

For instance add:
"NT Hardware Detect"
"NT Loader"

But I do not understand your question or problem so I have no idea if this
is what you have asked for.

Regards,
Slobodan

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com...nity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Martin D" <anonymous@discussions.microsoft.com> wrote in message
news:3d6901c42a56$967ec160$a101280a@phx.gbl...
> When I build and XPe configuration using TA.EXE devices
> output, NTLDR and NTDectect.com are included in the final
> image but I have STOP 7B when I start the OS (missing PCI
> or other devices). Then, I decide to use TAP.EXE devices
> output to ensure that all devices are included but I
> got 'DLLs loaded missing' when the OS start. NTLDR and
> NTDetect.com are not included in the final image (and it
> says that I should contact the administrator...snif!
> that's me!). What can I do to force the inclusion of
> NTDetect.com and NTLDR OR other trick to solve this
> problem using TA.EXE output?
>
> Thanks!

And why did you remove those two components from the build ?

"Slobodan Brcin \(eMVP\)" <sbrcin@ptt.yu> wrote in message news:<uK#3pilKEHA.628@TK2MSFTNGP11.phx.gbl>...
> If you have resolved all dependencies there is no way that this component is
> missing since it is required even if you don't use TA or TAP.
>
> For instance add:
> "NT Hardware Detect"
> "NT Loader"
>
> But I do not understand your question or problem so I have no idea if this
> is what you have asked for.
>
> Regards,
> Slobodan
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
> Microsoft!
> https://www.windowsembeddedeval.com...nity/newsgroups
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> "Martin D" <anonymous@discussions.microsoft.com> wrote in message
> news:3d6901c42a56$967ec160$a101280a@phx.gbl...
> > When I build and XPe configuration using TA.EXE devices
> > output, NTLDR and NTDectect.com are included in the final
> > image but I have STOP 7B when I start the OS (missing PCI
> > or other devices). Then, I decide to use TAP.EXE devices
> > output to ensure that all devices are included but I
> > got 'DLLs loaded missing' when the OS start. NTLDR and
> > NTDetect.com are not included in the final image (and it
> > says that I should contact the administrator...snif!
> > that's me!). What can I do to force the inclusion of
> > NTDetect.com and NTLDR OR other trick to solve this
> > problem using TA.EXE output?
> >
> > Thanks!