question?

I made EWF with ram-overlay
FABlot.txt shows Creating EWF volume is successful
I also can use the command "ewfmgr c: -enable"and "ewfmgr c: -disable" successfully
But I can't use the command"ewfmgr c: -commit" and "ewfmgr c: -commitanddiable" because
when I use them , it show "Failed setting protected volume configuration with error 87"
I am confused.Can you help me

If you are up to date with QFE's then you are probably the first one with
this error.

Do you have "Enhanced Write Filter - Hotfix Q823025"?

http://groups.google.com/groups?hl=...hreadm=ew53CvZ2
BHA.1324%40tkmsftngp03&rnum=10&prev=/groups%3Fq%3D%2522with%2Berror%2B87%252
2%2Bgroup:microsoft.public.windowsxp.embedded.*%26hl%3Den%26lr%3D%26ie%3DUTF
-8%26oe%3DUTF-8%26group%3Dmicrosoft.public.windowsxp.embedded.*%26selm%3Dew5
3CvZ2BHA.1324%2540tkmsftngp03%26rnum%3D10

Regards,
Slobodan

BTW:
If you have already applied QFE 823025, then please create new thread and
report this problem back.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com...nity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"wgx" <anonymous@discussions.microsoft.com> wrote in message
news:909A0D08-DACC-4D20-B435-0CEEA1D7B301@microsoft.com...
> I made EWF with ram-overlay.
> FABlot.txt shows Creating EWF volume is successful.
> I also can use the command "ewfmgr c: -enable"and "ewfmgr c: -disable"
successfully.
> But I can't use the command"ewfmgr c: -commit" and "ewfmgr
c: -commitanddiable" because
> when I use them , it show "Failed setting protected volume configuration
with error 87".
> I am confused.Can you help me?
>