PC Review
Forums
Newsgroups
Windows XP
Windows XP Embedded
Could not find a driver for Generic volume (STORAGE\Volume).
Forums
Newsgroups
Windows XP
Windows XP Embedded
Could not find a driver for Generic volume (STORAGE\Volume).
![]() |
Could not find a driver for Generic volume (STORAGE\Volume). |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
My target platform is an embedded PC that uses the Via Eden Fanless
processor and a Via chipset. I installed Windows XP SP1 on the machine with all the appropriate hotfixes from Windows Update. Then I ran tap.exe on the target machine, generating the corresponding .pmq file. I imported the .pmq file in the Target Designer. Everything worked well except for the following message: ============================================================ Target Analyzer found 48 devices. Loading the driver database. (04:39:25 p.m.) Driver database contains 9348 drivers. (04:46:54 p.m.) Adding Default Monitor to the configuration. Info 101: Initializing new component: "Default Monitor [Version 5.1.2600, R620]" Info 101: Estimated footprint: 53248 Bytes .... Could not find a driver for Generic volume (STORAGE\Volume). .... Import succeeded with 47 drivers for 48 devices. ============================================================ Can I ignore this? Thanks in advance, Axel |
|
|
|
#2 |
|
Guest
Posts: n/a
|
Axel,
You can ignor this component. Regards, Sean Liming www.a7eng.com Author: Windows XP Embedded Advanced and Windows NT Embedded Step-by-Step <mammes@hotmail.com> wrote in message news:OSDtDz1kDHA.976@tk2msftngp13.phx.gbl... > My target platform is an embedded PC that uses the Via Eden Fanless > processor and a Via chipset. > I installed Windows XP SP1 on the machine with all the appropriate hotfixes > from Windows Update. > Then I ran tap.exe on the target machine, generating the corresponding ..pmq > file. > > I imported the .pmq file in the Target Designer. Everything worked well > except for the following message: > > ============================================================ > Target Analyzer found 48 devices. > Loading the driver database. (04:39:25 p.m.) > Driver database contains 9348 drivers. (04:46:54 p.m.) > Adding Default Monitor to the configuration. > Info 101: Initializing new component: "Default Monitor [Version 5.1.2600, > R620]" > Info 101: Estimated footprint: 53248 Bytes > ... > Could not find a driver for Generic volume (STORAGE\Volume). > ... > Import succeeded with 47 drivers for 48 devices. > > ============================================================ > > Can I ignore this? > > Thanks in advance, > Axel > > |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

