modem

i try to install modem directly after fba on xpe
installation success query modem is very slow but work,
modem dial not work

Is this still your USB modem?

"guidi fabio" <a.denardis@isacsrl.it> wrote in message
news:061001c3925e$d4ff7b40$a001280a@phx.gbl...
> i try to install modem directly after fba on xpe
> installation success query modem is very slow but work,
> modem dial not work

Hi Heidi,
it is still the same modem and I really do not know how to make it run.
I tried all the hints you suggested me and none of them worked. I am almost
crying!!!

"Heidi Linda eMVP" <hll@bts.co.uk> ha scritto nel messaggio
news:O3mu2$lkDHA.2272@tk2msftngp13.phx.gbl...
> Is this still your USB modem?
>
> "guidi fabio" <a.denardis@isacsrl.it> wrote in message
> news:061001c3925e$d4ff7b40$a001280a@phx.gbl...
> > i try to install modem directly after fba on xpe
> > installation success query modem is very slow but work,
> > modem dial not work
>
>

OK, well once I've got the new Vampire build done, you can try installing on
that and see whether it works or not.

"Andrea De Nardis" <a.denardis@isacsrl.it> wrote in message
news:u9wtMimkDHA.2312@TK2MSFTNGP12.phx.gbl...
> Hi Heidi,
> it is still the same modem and I really do not know how to make it
run.
> I tried all the hints you suggested me and none of them worked. I am
almost
> crying!!!
>
> "Heidi Linda eMVP" <hll@bts.co.uk> ha scritto nel messaggio
> news:O3mu2$lkDHA.2272@tk2msftngp13.phx.gbl...
> > Is this still your USB modem?
> >
> > "guidi fabio" <a.denardis@isacsrl.it> wrote in message
> > news:061001c3925e$d4ff7b40$a001280a@phx.gbl...
> > > i try to install modem directly after fba on xpe
> > > installation success query modem is very slow but work,
> > > modem dial not work
> >
> >
>
>

you wrote me
The error you reported before was 674, which was to do
with not being able to read the speed from the .inf file,
which sounds very likely to be responsible for your
problem.
Whether this was the error or not, you have two
possibilities - your driver is broken, or your driver has
dependencies you don't know about.
I would suggest you install the driver normally on the Xpe
image. If this corrects the problem, then you know your
driver component is at fault, and I suggest you use inctrl
5 (available from xpefiles.com) to track the installation
on an XPPro system and create a new component from this
information.
If you cannot install the driver, please report what
problems you have *in this thread* and we'll try to get
you sorted out.
If installing the driver works, but you still have the
same problems, then you know you are missing a dependency
somewhere.
i install direct modem after fba install success but modem work bad it is slow connect to 296bps this value is indicate tfrom compuetr that receive the call, at this moment i think that any component for modem usb aren't in my list it is possible have
the complete list of component for modem usb configuration

The easiest way to find out if this *is* a dependency issue is to use the
vampire build which I'm in the process of redoing. I have to do this on my
own time, as I actually do have work to do while at work. However, at the
moment I also have a rush sewing job on, and as I'm getting paid for that,
I'm afraid it gets most of my time.

"guidi fabio" <anonymous@discussions.microsoft.com> wrote in message
news:C219F08F-C6B6-4545-BCF2-C13052DAADA8@microsoft.com...
> you wrote me
> The error you reported before was 674, which was to do
> with not being able to read the speed from the .inf file,
> which sounds very likely to be responsible for your
> problem.
> Whether this was the error or not, you have two
> possibilities - your driver is broken, or your driver has
> dependencies you don't know about.
> I would suggest you install the driver normally on the Xpe
> image. If this corrects the problem, then you know your
> driver component is at fault, and I suggest you use inctrl
> 5 (available from xpefiles.com) to track the installation
> on an XPPro system and create a new component from this
> information.
> If you cannot install the driver, please report what
> problems you have *in this thread* and we'll try to get
> you sorted out.
> If installing the driver works, but you still have the
> same problems, then you know you are missing a dependency
> somewhere.
> i install direct modem after fba install success but modem work bad it is
slow connect to 296bps this value is indicate tfrom compuetr that receive
the call, at this moment i think that any component for modem usb aren't in
my list it is possible have
> the complete list of component for modem usb configuration