Network Bridge

I have an embedded board with 2 ethernet ports. Both port have the
appropriate class C IP address and are addressable on the network. When I
try to bridge them I get the message "An unexpected error occured while
configuring the Network Bridge". I have also checked the event log and did
not find anything there that could help me to troubleshoot. I have the
following components installed with service pack 1:

Local Network Bridge
Mac Bridge Minipot
+ all dependencies from Auto resolve.


Thanks,

Steve

How did you get your hardware list?

>-----Original Message-----
>
>I have an embedded board with 2 ethernet ports. Both
port have the
>appropriate class C IP address and are addressable on the
network. When I
>try to bridge them I get the message "An unexpected error
occured while
>configuring the Network Bridge". I have also checked the
event log and did
>not find anything there that could help me to
troubleshoot. I have the
>following components installed with service pack 1:
>
>Local Network Bridge
>Mac Bridge Minipot
>+ all dependencies from Auto resolve.
>
>
>Thanks,
>
>Steve
>
>
>.
>

Ta.exe or tap.exe? tap.exe is generally found to be a lot
more reliable...it could be a software dependency, in
which case the vampire.slx on xpefiles.com might be of use
to you.
>-----Original Message-----
>I use a combination of main board specification & Target
Analyzer. But I
>think my problem here is not the hardware. I even have a
third ethernet of
>wireless CISCO 350 pcmcia card working too. The onboard
dual nics are of
>Realtek.
>
>
>
>"Heidi Linda" <hll@bts.co.uk> wrote in message
>news:095101c36c7d$4ea00e90$a501280a@phx.gbl...
>> How did you get your hardware list?
>>
>> >-----Original Message-----
>> >
>> >I have an embedded board with 2 ethernet ports. Both
>> port have the
>> >appropriate class C IP address and are addressable on
the
>> network. When I
>> >try to bridge them I get the message "An unexpected
error
>> occured while
>> >configuring the Network Bridge". I have also checked
the
>> event log and did
>> >not find anything there that could help me to
>> troubleshoot. I have the
>> >following components installed with service pack 1:
>> >
>> >Local Network Bridge
>> >Mac Bridge Minipot
>> >+ all dependencies from Auto resolve.
>> >
>> >
>> >Thanks,
>> >
>> >Steve
>> >
>> >
>> >.
>> >
>
>
>.
>