PC Review
Forums
Newsgroups
Windows XP
Windows XP Hardware
Problem with WinXP SP2. Event ID: 11 Origin: Disk
Forums
Newsgroups
Windows XP
Windows XP Hardware
Problem with WinXP SP2. Event ID: 11 Origin: Disk
![]() |
Problem with WinXP SP2. Event ID: 11 Origin: Disk |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
I have a PC with working version of Windows XP+SP1.
I have two removable HardDisk that I use, both mount the same operating system (XP+SP1). The HardDisk are two Maxtor of 80 Gb and other of 120 Gb. After to have installed the service Pack 2 all it seems to work correctly but if within in the registry of the events I found error "Event ID: 11" with "origin: Disk" My configuration Hardware is following: Matherboard: ASRock k7s41gx Processor: Athlon XP 2600+ Barton Ram: 1 Gb 400 DDR Video: GEFORCE 5 FX 5500 256 MB DDR AGP 8X Disk: MAXTOR D.MaxPlus9 6Y080L0 80GB ATA 133 7.2RPM 2 MB MAXTOR D.MaxPlus9 120GB ATA 133 DVD-RW: NEC 2500A The PC has all the drivers updated (bios comprised) and the problem verification after to have installed the SP2. Regards Luigi |
|
|
|
#2 |
|
Guest
Posts: n/a
|
This problem is typically caused by a failing cable that connects the drive
to the computer. Try replacing the cable with a known working one. Dave |
|
|
|
#3 |
|
Guest
Posts: n/a
|
"Dave" <notdisclosed@microsoft.com> wrote in message news:yVmBnDPwEHA.3152@cpmsftngxa10.phx.gbl... > This problem is typically caused by a failing cable that connects the > drive > to the computer. > > Try replacing the cable with a known working one. > > Dave > And with those removable disks, depending on how the connection is made, you've got a greater chance something won't be as snug as it should be; I've got one that takes considerable force to get it seated all the way. If you move them around a lot, there's also a chance that the connection has worn or loosened. |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

