Re: Problem with installation Vista x64

If you have any devices connected other than the minimum required to do the
install, disconnect them and install later. Try installing your video
driver, either at the load drivers button on the select partition page or
using F8 and using Safe Mode.


"Haubentaucher" <Haubentaucher.378bx4@no-mx.forums.net> wrote in message
news:Haubentaucher.378bx4@no-mx.forums.net...
>
> Hello,
>
> I have a problem with the Vista x64 Setup. After loading the setup
> files, i get a bluescreen with the error code 0x00000050
> (Page_Fault_In_Non_Paged_Area).
> When i start the setup with F8, i can select the Safe Mode and other
> Options. When i choose Safe Mode i see, that the last file/driver is the
> disk.sys. After a few seconds the bluescreen is displayed.
>
> I changed the RAM and made a memory test. The RAM is OK. I tried the
> install with one DIMM.
> Then I changed the SATA-Harddisk. The error is the same.
> I already updated my BIOS, but nothing helps.
>
>
> _To_my_system:__
> MSI K9N Platinum
> AMD Athlon64 X2 4600+
> 4 x 1 GB Corsair DDR2-800
> Sapphire ATI Radeon X1900
>
> But i can easily install Windows XP (32 Bit).
>
> Can someone help me?
> Thank you.
>
> Alex
>
>
> --
> Haubentaucher