Re: My computer won't start!!!

"This is a trickey error to resolve. The guru's at Microsoft left us
with this advice for your situation:"

Don't post the above CRAP here, and learn to spell "tricky".
You got advice from nobody!

"If any of our admins or mods have any other advice for this situation,
your comments are welcome."


There are NO moderators or "our admins here" here; we all users that provide
FREE info, for NO wages, to other posters.

What dope are you smoking!!!
Take your stupidity somewhere else!

You have worn your welcome out very quick!

--
Mick Murphy - Qld - Australia


".Joe" wrote:

>
> Solertia;636518 Wrote:
> > When I booted up my computer the other day, a message came on the screen
> > saying:
> >
> > Windows Boot Manager
> > -----------------------------
> > Windows failed to start. A recent hardware or software change might be
> > the cause. To fix the problem:
> >
> > 1. Insert your Windows installation disc and restart your computer.
> > 2. Choose your language settings, and then click "Next."
> > 3. Click "Repair your computer."
> >
> > If you do not have this disc, contact your system administrator or
> > computer manufacturer for assistance.
> >
> > File: \Windows\System32\drivers\sfvfs02.sys
> >
> > Status: 0xc000428
> >
> > Info: Windows cannot verify the digital signature for this file.
> > ----------------------------
> > ENTER=Continue ESC=Exit
> >
> >
> > My first problem is, for whatever reason, when I press ENTER or ESC,
> > nothing happens.
> >
> > My second problem is, when I insert the installation disc and restart
> > the computer, it just goes back to the screen above.
> >
> >
> > How do I fix one or both of these problems? This is a serious issue
> > because I have not been able to start my computer for days!
> >
> >
> > Thanks in advance!
>
> Welcome to the Vista x64 Forums arty:
>
> This is a trickey error to resolve. The guru's at Microsoft left us
> with this advice for your situation:
>
> Then there are two likely scenarios:
>
> 1. The installation is damaged irrepairably. Recover data where you
> can, format and do a clean installation.
>
> 2. You have a hardware conflict, incorrect timing, or bad memory, and
> nothing will be resolved until you address it.
>
> It looks like its either a hardware issue or a blown OS issue. In
> either case, it won't be easy to fix.
>
> If any of our admins or mods have any other advice for this situation,
> your comments are welcome.
>
>
> --
> .Joe
>
> _[image:
> http://uswave.net/joetmvx64.png] (\"http://www.vistax64.com/index.php?referrerid=17621\")_
> _CPU-Z_Verified (\"http://valid.x86-secret.com/show_oc.php?id=323179\")_
>