Vista network/internet headache

I recently installed a D-link DIR-615 router and I'm having the problem of
being able to connect to the network, but not being able to access the
internet.

When I try to connect lately I get this message:

Connection unsuccessful

This computer is connected to *network name* but does not have access to the
internet.

I know I have the correct WEP key and good signal strength. I've tried
changing the settings on the router, but so far I have made no progress.

Ideas? (links, help, etc. all greatly appreciated)

I would check ant new firmware for the router and driver for NIC.

Vista Wireless IssuesVista: Common Problems with 802.11 Wireless ...
Inability to Connect and the wireless doesn’t receive the single. 1) It
could be the Wireless adapter driver ...
http://www.wifimvp.com/vistawireless.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Mike B." <Mike B.@discussions.microsoft.com> wrote in message
news:68DC1983-D86A-48F5-94FD-EE56EA812000@microsoft.com...
>I recently installed a D-link DIR-615 router and I'm having the problem of
> being able to connect to the network, but not being able to access the
> internet.
>
> When I try to connect lately I get this message:
>
> Connection unsuccessful
>
> This computer is connected to *network name* but does not have access to
> the
> internet.
>
> I know I have the correct WEP key and good signal strength. I've tried
> changing the settings on the router, but so far I have made no progress.
>
> Ideas? (links, help, etc. all greatly appreciated)
>
>

WEP is not safe, after you update the router firmware, you should
change to WPA.

Please post the text output of ipconfig /all if you still have an
issue after the updates and the change to WPA

http://digitalmediaphile.wordpress....et-text-output/

On Tue, 29 Jan 2008 15:16:34 -0800, Mike B. <Mike
B.@discussions.microsoft.com> wrote:

>I recently installed a D-link DIR-615 router and I'm having the problem of
>being able to connect to the network, but not being able to access the
>internet.
>
>When I try to connect lately I get this message:
>
>Connection unsuccessful
>
>This computer is connected to *network name* but does not have access to the
>internet.
>
>I know I have the correct WEP key and good signal strength. I've tried
>changing the settings on the router, but so far I have made no progress.
>
>Ideas? (links, help, etc. all greatly appreciated)
>
--

Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/...rts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/