PC Review Forums Newsgroups Windows Vista Windows Vista Hardware firewire for vista

Reply

firewire for vista

 
Thread Tools Rate Thread
Old 21-01-2008, 03:52 PM   #1
Edfex
Guest
 
Posts: n/a
Default firewire for vista


Hey is there any patch or 3rd party add-on that can enable ip over firewire
on vista? Vista seems to have that disabled. I only have 100Mbps LAN, and
firewire is so much faster.

Ed

  Reply With Quote
Old 21-01-2008, 04:38 PM   #2
Dwarf
Guest
 
Posts: n/a
Default RE: firewire for vista

Hi Ed,

As far as I am aware, there are no means to enable Internet communication
over a firewire interface. This interface is designed to interface digital
cameras, external drives and some printer/scanners. It is not designed for
communications purposes. Although you could use USB (there are some USB
modems available), you will get the best results if you use the LAN interface
as it is designed specifically for communications purposes. What is the
speed of your Internet connection? It is probably a lot lower than the 100Mb
LAN interface, and, as such, is the limiting factor. Upgrading to a faster
interface such as Gb LAN (1000Mb) will not provide any benefits unless your
Internet connection warrants the increased speed.
Dwarf

"Edfex" wrote:

> Hey is there any patch or 3rd party add-on that can enable ip over firewire
> on vista? Vista seems to have that disabled. I only have 100Mbps LAN, and
> firewire is so much faster.
>
> Ed
>
>

  Reply With Quote
Old 21-01-2008, 04:44 PM   #3
Carlos
Guest
 
Posts: n/a
Default RE: firewire for vista

What about a 1GB LAN?
Fireware networking is disabled in Vista.
Carlos

"Edfex" wrote:

> Hey is there any patch or 3rd party add-on that can enable ip over firewire
> on vista? Vista seems to have that disabled. I only have 100Mbps LAN, and
> firewire is so much faster.
>
> Ed
>
>

  Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off