Re: Re-install XPe Studio

At any point did you change the share settings on the repository folder for
full read-write access?

--
Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
"John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
news:ukA%234cgUIHA.5160@TK2MSFTNGP05.phx.gbl...
> I'm trying to re-install XPe studio. I'm following this order:
>
>
>
> 1) Un-install XPe studio using Add-Remove Programs. Delete all folders
> including repositories.
>
> 2) Follow this page for installing the 9 CD's in the correct order,
> including language packs:
>
> http://msdn2.microsoft.com/en-us/library/aa460087.aspx
>
> 3) Install FP2007 from ECE site download.
>
> 4) Install Update Rollup 1.0 from ECE site download.
>
> 5) Install monthly QFE updates from ECE site download from June-November
> 2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
> June 2007.
>
> 6) Install my custom components and componentized hardware drivers.
>
>
>
> When I install Update Rollup 1.0 I get the attached error. What am I
> doing
> wrong? Perhaps I need to install all monthly updates first?
>
>
>
> Regards,
>
> John
>

Hi Mr. Liming,

No I did not even create a share for the repository folder. Is this
required?

John




"Sean Liming (MVP)" <sean_liming@sjjmicro.com> wrote in message
news:u5ZlBchUIHA.5208@TK2MSFTNGP04.phx.gbl...
>
> At any point did you change the share settings on the repository folder
> for full read-write access?
>
> --
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> "John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
> news:ukA%234cgUIHA.5160@TK2MSFTNGP05.phx.gbl...
>> I'm trying to re-install XPe studio. I'm following this order:
>>
>>
>>
>> 1) Un-install XPe studio using Add-Remove Programs. Delete all folders
>> including repositories.
>>
>> 2) Follow this page for installing the 9 CD's in the correct order,
>> including language packs:
>>
>> http://msdn2.microsoft.com/en-us/library/aa460087.aspx
>>
>> 3) Install FP2007 from ECE site download.
>>
>> 4) Install Update Rollup 1.0 from ECE site download.
>>
>> 5) Install monthly QFE updates from ECE site download from June-November
>> 2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
>> June 2007.
>>
>> 6) Install my custom components and componentized hardware drivers.
>>
>>
>>
>> When I install Update Rollup 1.0 I get the attached error. What am I
>> doing
>> wrong? Perhaps I need to install all monthly updates first?
>>
>>
>>
>> Regards,
>>
>> John
>>
>

Yes, the tools setup a read-only share when it should be a read-write - full
access share.


--
Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
"John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
news:OfFBVwhUIHA.1744@TK2MSFTNGP05.phx.gbl...
> Hi Mr. Liming,
>
> No I did not even create a share for the repository folder. Is this
> required?
>
> John
>
>
>
>
> "Sean Liming (MVP)" <sean_liming@sjjmicro.com> wrote in message
> news:u5ZlBchUIHA.5208@TK2MSFTNGP04.phx.gbl...
>>
>> At any point did you change the share settings on the repository folder
>> for full read-write access?
>>
>> --
>> Regards,
>>
>> Sean Liming
>> www.sjjmicro.com / www.seanliming.com
>> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>> "John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
>> news:ukA%234cgUIHA.5160@TK2MSFTNGP05.phx.gbl...
>>> I'm trying to re-install XPe studio. I'm following this order:
>>>
>>>
>>>
>>> 1) Un-install XPe studio using Add-Remove Programs. Delete all folders
>>> including repositories.
>>>
>>> 2) Follow this page for installing the 9 CD's in the correct order,
>>> including language packs:
>>>
>>> http://msdn2.microsoft.com/en-us/library/aa460087.aspx
>>>
>>> 3) Install FP2007 from ECE site download.
>>>
>>> 4) Install Update Rollup 1.0 from ECE site download.
>>>
>>> 5) Install monthly QFE updates from ECE site download from June-November
>>> 2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
>>> June 2007.
>>>
>>> 6) Install my custom components and componentized hardware drivers.
>>>
>>>
>>>
>>> When I install Update Rollup 1.0 I get the attached error. What am I
>>> doing
>>> wrong? Perhaps I need to install all monthly updates first?
>>>
>>>
>>>
>>> Regards,
>>>
>>> John
>>>
>>
>

OK, thanks. I'll give it a try between steps 2 and 3.

Do I need all the ECE monthly updates between steps 2 and 4? I've
downloaded all updates from the ECE site from Jun-06 through Dec-07. Also
wondering if I need the archived updates for SP2 dated Dec-04 through
Sep-06?

Regards,
John

*****************************************************
1) Un-install XPe studio using Add-Remove Programs. Delete all folders
including repositories.

2) Follow this page for installing the 9 CD's in the correct order,
including language packs:

http://msdn2.microsoft.com/en-us/library/aa460087.aspx

3) Install FP2007 from ECE site download.

4) Install Update Rollup 1.0 from ECE site download.

5) Install monthly QFE updates from ECE site download from June-November
2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
June 2007.

6) Install my custom components and componentized hardware drivers.

7) Done.

When I install SP1->SP2->FP2007->UR1 - I don't include any updates. Only
after UR1 and the udpates that follow UR1 should be added.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
"John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
news:uE24H$iUIHA.3940@TK2MSFTNGP05.phx.gbl...
> OK, thanks. I'll give it a try between steps 2 and 3.
>
> Do I need all the ECE monthly updates between steps 2 and 4? I've
> downloaded all updates from the ECE site from Jun-06 through Dec-07. Also
> wondering if I need the archived updates for SP2 dated Dec-04 through
> Sep-06?
>
> Regards,
> John
>
> *****************************************************
> 1) Un-install XPe studio using Add-Remove Programs. Delete all folders
> including repositories.
>
> 2) Follow this page for installing the 9 CD's in the correct order,
> including language packs:
>
> http://msdn2.microsoft.com/en-us/library/aa460087.aspx
>
> 3) Install FP2007 from ECE site download.
>
> 4) Install Update Rollup 1.0 from ECE site download.
>
> 5) Install monthly QFE updates from ECE site download from June-November
> 2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
> June 2007.
>
> 6) Install my custom components and componentized hardware drivers.
>
> 7) Done.

Thanks for your help Mr. Liming. Everything installed great with your
advice. You were correct, the share on the repositories folder disappeared
for some reason. I shared the folder and UR1.0 installed perfectly.

Regards,
John




"Sean Liming (MVP)" <sean_liming@sjjmicro.com> wrote in message
news:uwifPJkUIHA.5264@TK2MSFTNGP02.phx.gbl...
>
> When I install SP1->SP2->FP2007->UR1 - I don't include any updates. Only
> after UR1 and the udpates that follow UR1 should be added.
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> "John Mueske" <jmueske_at_ana-logix_dot_com> wrote in message
> news:uE24H$iUIHA.3940@TK2MSFTNGP05.phx.gbl...
>> OK, thanks. I'll give it a try between steps 2 and 3.
>>
>> Do I need all the ECE monthly updates between steps 2 and 4? I've
>> downloaded all updates from the ECE site from Jun-06 through Dec-07.
>> Also wondering if I need the archived updates for SP2 dated Dec-04
>> through Sep-06?
>>
>> Regards,
>> John
>>
>> *****************************************************
>> 1) Un-install XPe studio using Add-Remove Programs. Delete all folders
>> including repositories.
>>
>> 2) Follow this page for installing the 9 CD's in the correct order,
>> including language packs:
>>
>> http://msdn2.microsoft.com/en-us/library/aa460087.aspx
>>
>> 3) Install FP2007 from ECE site download.
>>
>> 4) Install Update Rollup 1.0 from ECE site download.
>>
>> 5) Install monthly QFE updates from ECE site download from June-November
>> 2007. I believe FP2007 and Update Rollup 1.0 include all QFE's prior to
>> June 2007.
>>
>> 6) Install my custom components and componentized hardware drivers.
>>
>> 7) Done.
>