XPe don't boot on intel845GV mainboard...

I 'm porting Embedded XP on intel845GV mainboard.

The mainboard's Spec is below.
Intel845GV chipset
Intel845GV Graphic
Realtek AC'97 audio

I made each device driver components.
And added the components in target slx files.(When made image files, there
are no problem)

But, when boot using made image, blue screen was shown before fba running.

This is the error message:
A problem has been detected and Windows has been shut down to
prevent damage to your
Computer.

If this is the first time you've seen this Stop error screen,
restart your computer.
If this screen appears again, follow thease steps:

Check for viruses on your computer. Remove any newly
installed hard drives or hard drive controllers.
Check your hard drive to make sure it is properly configured and
terminated. Run chkdisk/f to check
for hard drive corruption, and then restart your computer.

Technical information:
STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,
0x00000000)

I don't know causes..

Thanks.

This is a common problem if your configuration is missing a component
that is required to boot the OS. The following article may be of help:

http://www.microsoft.com/windows/em...stoperror7b.asp

Also, you can find many prior posts regarding this using Google Groups.

Mike

"Dosun Hong" <radiossoaf@yahoo.co.kr> wrote in message
news:OnjO0AFPDHA.2480@tk2msftngp13.phx.gbl...
> I 'm porting Embedded XP on intel845GV mainboard.
>
> The mainboard's Spec is below.
> Intel845GV chipset
> Intel845GV Graphic
> Realtek AC'97 audio
>
> I made each device driver components.
> And added the components in target slx files.(When made image files, there
> are no problem)
>
> But, when boot using made image, blue screen was shown before fba running.
>
> This is the error message:
> A problem has been detected and Windows has been shut down
to
> prevent damage to your
> Computer.
>
> If this is the first time you've seen this Stop error
screen,
> restart your computer.
> If this screen appears again, follow thease steps:
>
> Check for viruses on your computer. Remove any newly
> installed hard drives or hard drive controllers.
> Check your hard drive to make sure it is properly configured
and
> terminated. Run chkdisk/f to check
> for hard drive corruption, and then restart your computer.
>
> Technical information:
> STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,
> 0x00000000)
>
> I don't know causes..
>
> Thanks.
>
>