Re: Problem With the EWF APIs

There is a QFE to address this problem. Go to
http://www.microsoft.com/windows/em...tes/default.asp
and select Q823025.

Bill Moxley
Software Design Engineer
Microsoft Windows Embedded Product Team
--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Sriram" <vsrirama@rediffmail.com> wrote in message
news:c087652b.0306230452.67dbc8ba@posting.google.com...
> Sir,
> I am Calling EWF APIs from a Service and Its Not Working.
>
> If the Current Status is Enabled.
>
> I set the Status to Disabled and Commit.
> I call EwfMgrDisable(hDevice, TRUE). There is No Error. I checked the
ret
> value.
>
> Now If I use EWFMGR -all command.
>
> I Get Status as
>
> State: ENABLED
> Boot Command : DISABLE
> Param1 1
> Param2 0
>
> Now If i reboot the system. I get the Same Status.
>
> ie I Get When I use EWFMGR -all command.
>
> State: ENABLED
> Boot Command : DISABLE
> Param1 1
> Param2 0
>
>
> According to me the State must be disabled.
>
> The Same State is Displayed Even if i reboot it any number of Times.
> Please Clarify,
>
>
> Regards,
> Ram

Bill:

Could you explain a little more what conditions can cause BSOD's?

I periodically perform the following in a batch file: "ewfmgr C: -commit >
D:\ewfmgr.log"

Am I susceptible to BSOD's?

TIA... Doug
"Bill [MS]" <bmoxley@online.microsoft.com> wrote in message
news:OO5NJr0ODHA.2480@tk2msftngp13.phx.gbl...
> There is a QFE to address this problem. Go to
> http://www.microsoft.com/windows/em...tes/default.asp
> and select Q823025.
>
> Bill Moxley
> Software Design Engineer
> Microsoft Windows Embedded Product Team
> --
> This posting is provided "AS IS" with no warranties, and confers no
rights.
>
>
> "Sriram" <vsrirama@rediffmail.com> wrote in message
> news:c087652b.0306230452.67dbc8ba@posting.google.com...
> > Sir,
> > I am Calling EWF APIs from a Service and Its Not Working.
> >
> > If the Current Status is Enabled.
> >
> > I set the Status to Disabled and Commit.
> > I call EwfMgrDisable(hDevice, TRUE). There is No Error. I checked the
> ret
> > value.
> >
> > Now If I use EWFMGR -all command.
> >
> > I Get Status as
> >
> > State: ENABLED
> > Boot Command : DISABLE
> > Param1 1
> > Param2 0
> >
> > Now If i reboot the system. I get the Same Status.
> >
> > ie I Get When I use EWFMGR -all command.
> >
> > State: ENABLED
> > Boot Command : DISABLE
> > Param1 1
> > Param2 0
> >
> >
> > According to me the State must be disabled.
> >
> > The Same State is Displayed Even if i reboot it any number of Times.
> > Please Clarify,
> >
> >
> > Regards,
> > Ram
>
>