blue screen

Yesterday I deployed my Image on a Tyan motherboard and today I found this
error message:



A problem has been detected and Windows has been shut down to prevent damage
to your

Computer.

If this is the first time you've seen this Stop error screen, restart your
computer.

If this screen appears again, follow thease steps:check to be sure you have
adequate disk space.If a drivers is identified in the stop message, disable
the driver or check with the

manufacturer for driver updates.Try changing video adapters .Check with yor
hardware ventor for any BIOS updates. Disable BIOS memory options such as
caching or shadowing. If yor need to use Safe Mode to remove or disable
components, restart your computer, press F8 to select Advanced STARTUP
OPTIONS, and then select safe mode.



Technical Information:

*** stop: 0x0000008BE (0X0000005, 0XF9947A84, 0X00000000)



***stream,sys address FC898000, DATE STAMP 3d6ddc20

Are you sure that's the right stop code, i don't see any reference to 8BE.
Could you have meant stop "BE" which is is listed below:
--------------------------
ATTEMPTED_WRITE_TO_READONLY_MEMORY (0xBE)
An attempt was made to write to readonly memory. The guilty driver is on
the stack trace (and is typically the current instruction pointer).

1 - Virtual address for the attempted write.
2 - PTE contents.
3 - Unique internal Mm information.
4 - Unique internal Mm code.

When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
--------------------------

--

This posting is provided "AS IS" with no warranties, and confers no rights.
==========================================================


"Gianluca Facca" <g.facca@teledata-i.com> wrote in message
news:eyecPeyODHA.704@tk2msftngp13.phx.gbl...
> Yesterday I deployed my Image on a Tyan motherboard and today I found this
> error message:
>
>
>
> A problem has been detected and Windows has been shut down to prevent
damage
> to your
>
> Computer.
>
> If this is the first time you've seen this Stop error screen, restart your
> computer.
>
> If this screen appears again, follow thease steps:check to be sure you
have
> adequate disk space.If a drivers is identified in the stop message,
disable
> the driver or check with the
>
> manufacturer for driver updates.Try changing video adapters .Check with
yor
> hardware ventor for any BIOS updates. Disable BIOS memory options such as
> caching or shadowing. If yor need to use Safe Mode to remove or disable
> components, restart your computer, press F8 to select Advanced STARTUP
> OPTIONS, and then select safe mode.
>
>
>
> Technical Information:
>
> *** stop: 0x0000008BE (0X0000005, 0XF9947A84, 0X00000000)
>
>
>
> ***stream,sys address FC898000, DATE STAMP 3d6ddc20
>
>

Probably this is the right stop code

stop: 0x0000008E (0X0000005, 0XFC611E58, 0XF7092A84, 0X00000000)
stream,sys address 0XFC611E58, BASE AT FC611000, DATE STAMP 3d6ddc20







"Andy Allred [MS]" <andyall@online.microsoft.com> ha scritto nel messaggio
news:O2Uj92yODHA.3880@tk2msftngp13.phx.gbl...
> Are you sure that's the right stop code, i don't see any reference to 8BE.
> Could you have meant stop "BE" which is is listed below:
> --------------------------
> ATTEMPTED_WRITE_TO_READONLY_MEMORY (0xBE)
> An attempt was made to write to readonly memory. The guilty driver is on
> the stack trace (and is typically the current instruction pointer).
>
> 1 - Virtual address for the attempted write.
> 2 - PTE contents.
> 3 - Unique internal Mm information.
> 4 - Unique internal Mm code.
>
> When possible, the guilty driver's name (Unicode string) is printed on
> the bugcheck screen and saved in KiBugCheckDriver.
> --------------------------
>
> --
>
> This posting is provided "AS IS" with no warranties, and confers no
rights.
> ==========================================================
>
>
> "Gianluca Facca" <g.facca@teledata-i.com> wrote in message
> news:eyecPeyODHA.704@tk2msftngp13.phx.gbl...
> > Yesterday I deployed my Image on a Tyan motherboard and today I found
this
> > error message:
> >
> >
> >
> > A problem has been detected and Windows has been shut down to prevent
> damage
> > to your
> >
> > Computer.
> >
> > If this is the first time you've seen this Stop error screen, restart
your
> > computer.
> >
> > If this screen appears again, follow thease steps:check to be sure you
> have
> > adequate disk space.If a drivers is identified in the stop message,
> disable
> > the driver or check with the
> >
> > manufacturer for driver updates.Try changing video adapters .Check with
> yor
> > hardware ventor for any BIOS updates. Disable BIOS memory options such
as
> > caching or shadowing. If yor need to use Safe Mode to remove or disable
> > components, restart your computer, press F8 to select Advanced STARTUP
> > OPTIONS, and then select safe mode.
> >
> >
> >
> > Technical Information:
> >
> > *** stop: 0x0000008BE (0X0000005, 0XF9947A84, 0X00000000)
> >
> >
> >
> > ***stream,sys address FC898000, DATE STAMP 3d6ddc20
> >
> >
>
>