XPe using USB Disk on Key

I need to make M-Systems USB Disk on Key (DOK) work in
XPe. DOK works fine with my XP Pro work station. USB mice
and keyboards work fine with my XPe build. When I try to
use the DOK with my XPe build I receive a request to load
a driver. M-Systems tells me that XPe has the USB Mass
Storage driver. There is even a Control Engineering
article on the Web quoting M-Systems on this. I have
looked at the 3rd party drivers and the one M-Systems
provided on my original XP dev CD is for Disk on Chip (per
the readme). I have upgraded to SP1 and loaded all the
latest QFE's. I have hunted through the Components and not
found a solution. Does anyone know the name of the
component I need to add or where I can get the driver or
sld files?

Mario
Thanks for the quick response. That is what I thought but
where are these components? I just ran a filter with
DiskOnKey or USB with a visibility of 100 and neither of
these components came up.
Paul

>-----Original Message-----
>Hi Paul
>
>I have included these components, to get the usb
stick/disk to work:
>
>* DiskOnKey USB personal storage device
>* USB Mass storage Device
>
>this works fine for me.
>
>mario
>
>
>
>"Paul A. Lowe" <PaulALowe2@eaton.com> wrote in message
>news:0c2e01c33b27$33515f40$a401280a@phx.gbl...
>> I need to make M-Systems USB Disk on Key (DOK) work in
>> XPe. DOK works fine with my XP Pro work station. USB
mice
>> and keyboards work fine with my XPe build. When I try
to
>> use the DOK with my XPe build I receive a request to
load
>> a driver. M-Systems tells me that XPe has the USB Mass
>> Storage driver. There is even a Control Engineering
>> article on the Web quoting M-Systems on this. I have
>> looked at the 3rd party drivers and the one M-Systems
>> provided on my original XP dev CD is for Disk on Chip
(per
>> the readme). I have upgraded to SP1 and loaded all the
>> latest QFE's. I have hunted through the Components and
not
>> found a solution. Does anyone know the name of the
>> component I need to add or where I can get the driver
or
>> sld files?
>
>
>.
>

Mario
Found the Disk on Key driver in the hardware section but
did not find the USB Mass Storage in the software section.
Went ahead and added the Disk on Key component, ran Auto
resolve in the dependency checker and built the load.
Tested it and the Disk on Key now works. Am a little
concerned that I cannot find the USB Mass Storage
component but the system now works. I will keep looking
for it. But for now a big THANK YOU. I can move on to
other features.
Thanks again
Paul

>-----Original Message-----
>both components are located under
>
>Hardware : Devices : Universal Serial Bus controllers;
Software : System :
>System Services : Base;
>
>
>mario
>
>
>"Paul A. Lowe" <PaulALowe2@eaton.com> wrote in message
>news:0be201c33b2b$07075760$a501280a@phx.gbl...
>> Mario
>> Thanks for the quick response. That is what I thought
but
>> where are these components? I just ran a filter with
>> DiskOnKey or USB with a visibility of 100 and neither of
>> these components came up.
>> Paul
>>
>> >-----Original Message-----
>> >Hi Paul
>> >
>> >I have included these components, to get the usb
>> stick/disk to work:
>> >
>> >* DiskOnKey USB personal storage device
>> >* USB Mass storage Device
>> >
>> >this works fine for me.
>> >
>> >mario
>> >
>> >
>> >
>> >"Paul A. Lowe" <PaulALowe2@eaton.com> wrote in message
>> >news:0c2e01c33b27$33515f40$a401280a@phx.gbl...
>> >> I need to make M-Systems USB Disk on Key (DOK) work
in
>> >> XPe. DOK works fine with my XP Pro work station. USB
>> mice
>> >> and keyboards work fine with my XPe build. When I try
>> to
>> >> use the DOK with my XPe build I receive a request to
>> load
>> >> a driver. M-Systems tells me that XPe has the USB
Mass
>> >> Storage driver. There is even a Control Engineering
>> >> article on the Web quoting M-Systems on this. I have
>> >> looked at the 3rd party drivers and the one M-Systems
>> >> provided on my original XP dev CD is for Disk on Chip
>> (per
>> >> the readme). I have upgraded to SP1 and loaded all
the
>> >> latest QFE's. I have hunted through the Components
and
>> not
>> >> found a solution. Does anyone know the name of the
>> >> component I need to add or where I can get the driver
>> or
>> >> sld files?
>> >
>> >
>> >.
>> >
>
>
>.
>