***** Computer Name User Interface *****

I want to to be able to change the XPe Comp Name... I have not sucecced thus
far.... I have the System Control Panel installed and someone in an early
thred mention I may need Administrative Support but I can't find this.

This is going to be a major issue and we have already missed one
deadline...... can any one help. Thanks.

Wayne

Since you have the "System Control Panel" component, does anything come up
when you double-click on CP-System?, i.e. do you see the System Properties
dialog? If so what tabs do you see?

Adding the "Computer Name User I/F" component will add the "Computer Name"
tab to the System Properties dialog. This should be what you need.

HTH... Doug
"Wayne Taylor" <wtt@parity-ict.com> wrote in message
news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
> I want to to be able to change the XPe Comp Name... I have not sucecced
thus
> far.... I have the System Control Panel installed and someone in an early
> thred mention I may need Administrative Support but I can't find this.
>
> This is going to be a major issue and we have already missed one
> deadline...... can any one help. Thanks.
>
> Wayne
>
>

Hi Doug,

Thanks for the reply. I have the System Control Panel in my image. I don't
have a system Icon (nor the cpl file) in the XPe build.... to answer you
question I can't do that...so I don't see anything.... I have the Computer
Name User I/F added.... I just can't get to it.....

I'm going to try coping the sysdm.cpl file to my XPe build and see what
happens, when I get a spare 10mins.

Thanks Again.


"Doug Hoeffel" <doug.hoeffelNO@SPAMcamtronics.com> wrote in message
news:OhvaFxxODHA.1216@TK2MSFTNGP11.phx.gbl...
> Since you have the "System Control Panel" component, does anything come up
> when you double-click on CP-System?, i.e. do you see the System Properties
> dialog? If so what tabs do you see?
>
> Adding the "Computer Name User I/F" component will add the "Computer Name"
> tab to the System Properties dialog. This should be what you need.
>
> HTH... Doug
> "Wayne Taylor" <wtt@parity-ict.com> wrote in message
> news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
> > I want to to be able to change the XPe Comp Name... I have not sucecced
> thus
> > far.... I have the System Control Panel installed and someone in an
early
> > thred mention I may need Administrative Support but I can't find this.
> >
> > This is going to be a major issue and we have already missed one
> > deadline...... can any one help. Thanks.
> >
> > Wayne
> >
> >
>
>

If you are wanting to set the computer name just once when you are building
your image, expand the Hal component (Standard PC, ACPI PCetc.). Click on
settings and choose System Identification, then add the computer name you
want.

Hope this helps,

Lynda [MS]

This posting is provided "AS IS" with no warranties, and confers no
rights


"Wayne Taylor" <wtt@parity-ict.com> wrote in message
news:uADBk0yODHA.2636@TK2MSFTNGP10.phx.gbl...
> Hi Doug,
>
> Thanks for the reply. I have the System Control Panel in my image. I don't
> have a system Icon (nor the cpl file) in the XPe build.... to answer you
> question I can't do that...so I don't see anything.... I have the Computer
> Name User I/F added.... I just can't get to it.....
>
> I'm going to try coping the sysdm.cpl file to my XPe build and see what
> happens, when I get a spare 10mins.
>
> Thanks Again.
>
>
> "Doug Hoeffel" <doug.hoeffelNO@SPAMcamtronics.com> wrote in message
> news:OhvaFxxODHA.1216@TK2MSFTNGP11.phx.gbl...
> > Since you have the "System Control Panel" component, does anything come
up
> > when you double-click on CP-System?, i.e. do you see the System
Properties
> > dialog? If so what tabs do you see?
> >
> > Adding the "Computer Name User I/F" component will add the "Computer
Name"
> > tab to the System Properties dialog. This should be what you need.
> >
> > HTH... Doug
> > "Wayne Taylor" <wtt@parity-ict.com> wrote in message
> > news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
> > > I want to to be able to change the XPe Comp Name... I have not
sucecced
> > thus
> > > far.... I have the System Control Panel installed and someone in an
> early
> > > thred mention I may need Administrative Support but I can't find this.
> > >
> > > This is going to be a major issue and we have already missed one
> > > deadline...... can any one help. Thanks.
> > >
> > > Wayne
> > >
> > >
> >
> >
>
>

Lynda,

Thanks for the reply. Unfortually I need the user to be able to change the
Computer Name.

Wayne
"lyallen" <lyallen@online.microsoft.com> wrote in message
news:O8TpL10ODHA.2768@tk2msftngp13.phx.gbl...
> If you are wanting to set the computer name just once when you are
building
> your image, expand the Hal component (Standard PC, ACPI PCetc.). Click on
> settings and choose System Identification, then add the computer name you
> want.
>
> Hope this helps,
>
> Lynda [MS]
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights
>
>
> "Wayne Taylor" <wtt@parity-ict.com> wrote in message
> news:uADBk0yODHA.2636@TK2MSFTNGP10.phx.gbl...
> > Hi Doug,
> >
> > Thanks for the reply. I have the System Control Panel in my image. I
don't
> > have a system Icon (nor the cpl file) in the XPe build.... to answer you
> > question I can't do that...so I don't see anything.... I have the
Computer
> > Name User I/F added.... I just can't get to it.....
> >
> > I'm going to try coping the sysdm.cpl file to my XPe build and see what
> > happens, when I get a spare 10mins.
> >
> > Thanks Again.
> >
> >
> > "Doug Hoeffel" <doug.hoeffelNO@SPAMcamtronics.com> wrote in message
> > news:OhvaFxxODHA.1216@TK2MSFTNGP11.phx.gbl...
> > > Since you have the "System Control Panel" component, does anything
come
> up
> > > when you double-click on CP-System?, i.e. do you see the System
> Properties
> > > dialog? If so what tabs do you see?
> > >
> > > Adding the "Computer Name User I/F" component will add the "Computer
> Name"
> > > tab to the System Properties dialog. This should be what you need.
> > >
> > > HTH... Doug
> > > "Wayne Taylor" <wtt@parity-ict.com> wrote in message
> > > news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
> > > > I want to to be able to change the XPe Comp Name... I have not
> sucecced
> > > thus
> > > > far.... I have the System Control Panel installed and someone in an
> > early
> > > > thred mention I may need Administrative Support but I can't find
this.
> > > >
> > > > This is going to be a major issue and we have already missed one
> > > > deadline...... can any one help. Thanks.
> > > >
> > > > Wayne
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Hi,

have you tried to change your computer name with NEWSID
(look for it at the internet). As far as I can remember
you can change Computer Name and SID of your computer with
this tool)

HTH
Gerhard


>-----Original Message-----
>Lynda,
>
>Thanks for the reply. Unfortually I need the user to be
able to change the
>Computer Name.
>
>Wayne
>"lyallen" <lyallen@online.microsoft.com> wrote in message
>news:O8TpL10ODHA.2768@tk2msftngp13.phx.gbl...
>> If you are wanting to set the computer name just once
when you are
>building
>> your image, expand the Hal component (Standard PC, ACPI
PCetc.). Click on
>> settings and choose System Identification, then add the
computer name you
>> want.
>>
>> Hope this helps,
>>
>> Lynda [MS]
>>
>> This posting is provided "AS IS" with no warranties,
and confers no
>> rights
>>
>>
>> "Wayne Taylor" <wtt@parity-ict.com> wrote in message
>> news:uADBk0yODHA.2636@TK2MSFTNGP10.phx.gbl...
>> > Hi Doug,
>> >
>> > Thanks for the reply. I have the System Control Panel
in my image. I
>don't
>> > have a system Icon (nor the cpl file) in the XPe
build.... to answer you
>> > question I can't do that...so I don't see
anything.... I have the
>Computer
>> > Name User I/F added.... I just can't get to it.....
>> >
>> > I'm going to try coping the sysdm.cpl file to my XPe
build and see what
>> > happens, when I get a spare 10mins.
>> >
>> > Thanks Again.
>> >
>> >
>> > "Doug Hoeffel" <doug.hoeffelNO@SPAMcamtronics.com>
wrote in message
>> > news:OhvaFxxODHA.1216@TK2MSFTNGP11.phx.gbl...
>> > > Since you have the "System Control Panel"
component, does anything
>come
>> up
>> > > when you double-click on CP-System?, i.e. do you
see the System
>> Properties
>> > > dialog? If so what tabs do you see?
>> > >
>> > > Adding the "Computer Name User I/F" component will
add the "Computer
>> Name"
>> > > tab to the System Properties dialog. This should
be what you need.
>> > >
>> > > HTH... Doug
>> > > "Wayne Taylor" <wtt@parity-ict.com> wrote in message
>> > > news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
>> > > > I want to to be able to change the XPe Comp
Name... I have not
>> sucecced
>> > > thus
>> > > > far.... I have the System Control Panel installed
and someone in an
>> > early
>> > > > thred mention I may need Administrative Support
but I can't find
>this.
>> > > >
>> > > > This is going to be a major issue and we have
already missed one
>> > > > deadline...... can any one help. Thanks.
>> > > >
>> > > > Wayne
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>>
>>
>
>
>.
>

Add Computer name user interface component, add system control panel. Go to
userinterface core---settings in your runtime image and select Context menu
options.

After FBA right click on Desktop and on desktop enable my computer.

Right My computer and go to Properties, there you shld be able to change
your computer name.

Hope this helps you.

Good luck
"Wayne Taylor" <wtt@parity-ict.com> wrote in message
news:upp3o4vODHA.2224@TK2MSFTNGP10.phx.gbl...
> I want to to be able to change the XPe Comp Name... I have not sucecced
thus
> far.... I have the System Control Panel installed and someone in an early
> thred mention I may need Administrative Support but I can't find this.
>
> This is going to be a major issue and we have already missed one
> deadline...... can any one help. Thanks.
>
> Wayne
>
>