PC Review
Forums
Newsgroups
Windows Vista
Windows Vista General Discussion
compatibility between vista and Garmin's Map Source DVD's
Forums
Newsgroups
Windows Vista
Windows Vista General Discussion
compatibility between vista and Garmin's Map Source DVD's
![]() |
compatibility between vista and Garmin's Map Source DVD's |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
Can I use City Navigator by Garmin (CNNAV8) on my vista operating system?
What about TOPO charts? Trip & waypoint manager? They all worked on XP!!! |
|
|
|
#2 |
|
Guest
Posts: n/a
|
Thomas
Only the people who make that software can tell you for sure. -- Ronnie Vernon Microsoft MVP Windows Shell/User "Thomas" <Thomas@discussions.microsoft.com> wrote in message news:044BC7FE-B465-43BC-8D0C-806A9D403A03@microsoft.com... > Can I use City Navigator by Garmin (CNNAV8) on my vista operating system? > What about TOPO charts? Trip & waypoint manager? They all worked on > XP!!! |
|
|
|
#3 |
|
Guest
Posts: n/a
|
Thomas wrote:
> Can I use City Navigator by Garmin (CNNAV8) on my vista operating system? > What about TOPO charts? Trip & waypoint manager? They all worked on XP!!! Garmin Topo 2008 version 6.13.1 is Vista compatible...here's a link to the update: http://www8.garmin.com/support/down...ails.jsp?id=209 there are also usb drivers available for Vista- go to the Garmin website, select your unit and look for available downloads. I have an etrex Vista hcx, and Topo 2008 works great. You don't need to install Trip and Waypoint manager if you have Topo 2008 installed...it's just for use with the basemap that comes installed on the unit. The Topo program has its own "manager" (Garmin specifically told me not to install Trip and Waypoint if I was going to install Topo 2008). Fitz |
|
|
|
#4 |
|
Guest
Posts: n/a
|
Fitz, Thanks most helpful reply. good info
"Fitz" wrote: > Thomas wrote: > > Can I use City Navigator by Garmin (CNNAV8) on my vista operating system? > > What about TOPO charts? Trip & waypoint manager? They all worked on XP!!! > Garmin Topo 2008 version 6.13.1 is Vista compatible...here's a link to > the update: > > http://www8.garmin.com/support/down...ails.jsp?id=209 > > there are also usb drivers available for Vista- go to the Garmin > website, select your unit and look for available downloads. > > I have an etrex Vista hcx, and Topo 2008 works great. You don't need to > install Trip and Waypoint manager if you have Topo 2008 installed...it's > just for use with the basemap that comes installed on the unit. The Topo > program has its own "manager" (Garmin specifically told me not to > install Trip and Waypoint if I was going to install Topo 2008). > > Fitz > |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

