Main Page 
PC Review
Forums
Newsgroups
Windows Vista
Windows Vista Installation
Windows VBscript 5.6
Forums
Newsgroups
Windows Vista
Windows Vista Installation
Windows VBscript 5.6
 |
Windows VBscript 5.6 |
|
|
Thread Tools | Rate Thread |
31-05-2007, 01:52 PM
|
#1 |
|
Guest
Posts: n/a
|
Windows VBscript 5.6
I had a problem loading a HP compatability file for VISTA, for my New
scanner, the HP Technical person suggested I download Windows VBScript 5.6 because of the error code 2738. The instruction stated to go to Microsoft and download this file for your computer. Their is not a VBScript 5.6 for Vista only for XP, 2000, 98 and the like. Will downloading the file for XP cause any problems for Vista? -- DC |
|
|
31-05-2007, 06:03 PM
|
#2 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
Hi DC,
Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. Type the following command and press ENTER: regsvr32 vbscript.dll -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... I had a problem loading a HP compatability file for VISTA, for my New scanner, the HP Technical person suggested I download Windows VBScript 5.6 because of the error code 2738. The instruction stated to go to Microsoft and download this file for your computer. Their is not a VBScript 5.6 for Vista only for XP, 2000, 98 and the like. Will downloading the file for XP cause any problems for Vista? -- DC |
|
|
|
01-06-2007, 08:47 PM
|
#3 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
Your answer was right on. Took two seconds to do and was able to load the
updated HP program. Funny thing that HP personnel did not know this simple fix. Thanks again. -- DC "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... > I had a problem loading a HP compatability file for VISTA, for my New > scanner, the HP Technical person suggested I download Windows VBScript 5.6 > because of the error code 2738. The instruction stated to go to Microsoft > and download this file for your computer. Their is not a VBScript 5.6 for > Vista only for XP, 2000, 98 and the like. Will downloading the file for XP > cause any problems for Vista? > -- > DC > |
|
|
|
02-06-2007, 03:19 AM
|
#4 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
You're welcome DC.
-- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "DC" <DC@discussions.microsoft.com> wrote in message news:7D28A7BF-1BAD-47C3-8ACE-6B060DF5BCF1@microsoft.com... Your answer was right on. Took two seconds to do and was able to load the updated HP program. Funny thing that HP personnel did not know this simple fix. Thanks again. -- DC "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... > I had a problem loading a HP compatability file for VISTA, for my New > scanner, the HP Technical person suggested I download Windows VBScript 5.6 > because of the error code 2738. The instruction stated to go to Microsoft > and download this file for your computer. Their is not a VBScript 5.6 for > Vista only for XP, 2000, 98 and the like. Will downloading the file for XP > cause any problems for Vista? > -- > DC > |
|
|
|
02-06-2007, 03:21 AM
|
#5 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
BTW, the HP support site mentions the solution.
HP - 'Fatal Error 2738' Message Displays in Windows Vista During Installation - c01016940: http://h20000.www2.hp.com/bizsuppor...=reg_R1002_USEN -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "DC" <DC@discussions.microsoft.com> wrote in message news:7D28A7BF-1BAD-47C3-8ACE-6B060DF5BCF1@microsoft.com... Your answer was right on. Took two seconds to do and was able to load the updated HP program. Funny thing that HP personnel did not know this simple fix. Thanks again. -- DC "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... > I had a problem loading a HP compatability file for VISTA, for my New > scanner, the HP Technical person suggested I download Windows VBScript 5.6 > because of the error code 2738. The instruction stated to go to Microsoft > and download this file for your computer. Their is not a VBScript 5.6 for > Vista only for XP, 2000, 98 and the like. Will downloading the file for XP > cause any problems for Vista? > -- > DC > |
|
|
|
16-06-2007, 06:29 PM
|
#6 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
Hi Ramesh
We are very thankful to you for the advice posted by you here. We had been looking for a solution to this problem for over five hours without any luck untill we came across this post. Thank you very much for your help. Keep up the good work! Thanks Abhijit "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... > I had a problem loading a HP compatability file for VISTA, for my New > scanner, the HP Technical person suggested I download Windows VBScript 5.6 > because of the error code 2738. The instruction stated to go to Microsoft > and download this file for your computer. Their is not a VBScript 5.6 for > Vista only for XP, 2000, 98 and the like. Will downloading the file for XP > cause any problems for Vista? > -- > DC > |
|
|
|
16-06-2007, 06:34 PM
|
#7 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
You're welcome, Abhijit.
Thanks for the feedback! -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "Abhijit" <Abhijit@discussions.microsoft.com> wrote in message news:6FD01AD0-6448-4FE5-BAE8-C17ADFBE5208@microsoft.com... Hi Ramesh We are very thankful to you for the advice posted by you here. We had been looking for a solution to this problem for over five hours without any luck untill we came across this post. Thank you very much for your help. Keep up the good work! Thanks Abhijit "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com |
|
|
|
16-06-2007, 06:35 PM
|
#8 |
|
Guest
Posts: n/a
|
Re: Windows VBscript 5.6
Can I install Windows Script 5.6 in Windows Vista?:
http://www.winhelponline.com/blogs/...dows-Vista.html -- Regards, Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] Windows® Troubleshooting http://www.winhelponline.com "Abhijit" <Abhijit@discussions.microsoft.com> wrote in message news:6FD01AD0-6448-4FE5-BAE8-C17ADFBE5208@microsoft.com... Hi Ramesh We are very thankful to you for the advice posted by you here. We had been looking for a solution to this problem for over five hours without any luck untill we came across this post. Thank you very much for your help. Keep up the good work! Thanks Abhijit "Ramesh, MS-MVP" wrote: > Hi DC, > > Windows Vista already includes the latest version of scripting runtimes. Perhaps you may need to register it once, from an elevated Command Prompt. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. > > Type the following command and press ENTER: > > regsvr32 vbscript.dll > > > -- > Regards, > > Ramesh Srinivasan, Microsoft MVP [Windows Shell/User] > Windows® Troubleshooting http://www.winhelponline.com > > > "DC" <DC@discussions.microsoft.com> wrote in message news:91289649-3988-43AB-A4BE-1274B17CB485@microsoft.com... > I had a problem loading a HP compatability file for VISTA, for my New > scanner, the HP Technical person suggested I download Windows VBScript 5.6 > because of the error code 2738. The instruction stated to go to Microsoft > and download this file for your computer. Their is not a VBScript 5.6 for > Vista only for XP, 2000, 98 and the like. Will downloading the file for XP > cause any problems for Vista? > -- > DC > |
|
|
|
|
| Thread Tools | |
| Rate This Thread | |
|
|
