PC Review Forums Newsgroups Windows Vista Windows Vista Print / Fax / Scan Re: HP Printing

Reply

Re: HP Printing

 
Thread Tools Rate Thread
Old 29-06-2006, 02:14 AM   #1
PA Bear
Guest
 
Posts: n/a
Default Re: HP Printing


Forwarded to microsoft.public.windows.vista.print_fax_scan via crosspost.

Access the MS newsgroups in Windows Mail (née Outlook Express) Newsreader
and you could post to the correct NG. See
http://www.microsoft.com/windowsxp/...groupsetup.mspx

Vista-specific newsgroups include:

microsoft.public.windows.vista.general
microsoft.public.windows.vista.administration_account
microsoft.public.windows.vista.hardware_devices
microsoft.public.windows.vista.installation_setup
microsoft.public.windows.vista.mail
microsoft.public.windows.vista.networking_sharing
microsoft.public.windows.vista.performance_maintenance
microsoft.public.windows.vista.print_fax_scan
microsoft.public.windows.vista.security
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE/OE, Shell/User, Security), Aumha.org VSOP, DTS-L.org


Bill S wrote:
> Two comments:
> 1.) In case the forum police haven't noticed the "IE7" and the "Printing,
> Faxing & Scanning" forums are mixed up by Microsoft - so don't have a
> hissy when you read this comment about printing on the IE7 forum instead
> of the other.
> 2.) I have two HP Photosmart printers (a Photosmart 375 and a Photosmart
> All-in-One 3310). After much trial and error I have been able to get
> both to print by using the embedded drivers that came with the Vista
> Beta2 disc. Do not try to install from the HP discs - it will not work -
> the drivers will not install. At the "Printers" window from the control
> panel click on "Add a Printer". Be sure your printer is USB connected
> and turned on. Follow the wizard to add a printer. The key seems to be
> that the USB printer port should be selected as a "Virtual Port" (not the
> USB DOT4 Port). Pick the HP manufacturer and the model closest to your
> printer's model number. Once the correct driver and the correct VIRTUAL
> USB port is selected the printers both seem to work correctly for me.
> Hope this helps.


  Reply With Quote
Old 22-08-2006, 11:18 PM   #2
=?Utf-8?B?UHVUelo=?=
Guest
 
Posts: n/a
Default Re: HP Printing

Where or how did you get a "Virtual Port"? I don't have that as an option.

"PA Bear" wrote:

> Forwarded to microsoft.public.windows.vista.print_fax_scan via crosspost.
>
> Access the MS newsgroups in Windows Mail (née Outlook Express) Newsreader
> and you could post to the correct NG. See
> http://www.microsoft.com/windowsxp/...groupsetup.mspx
>
> Vista-specific newsgroups include:
>
> microsoft.public.windows.vista.general
> microsoft.public.windows.vista.administration_account
> microsoft.public.windows.vista.hardware_devices
> microsoft.public.windows.vista.installation_setup
> microsoft.public.windows.vista.mail
> microsoft.public.windows.vista.networking_sharing
> microsoft.public.windows.vista.performance_maintenance
> microsoft.public.windows.vista.print_fax_scan
> microsoft.public.windows.vista.security
> --
> ~Robear Dyer (PA Bear)
> MS MVP-Windows (IE/OE, Shell/User, Security), Aumha.org VSOP, DTS-L.org
>
>
> Bill S wrote:
> > Two comments:
> > 1.) In case the forum police haven't noticed the "IE7" and the "Printing,
> > Faxing & Scanning" forums are mixed up by Microsoft - so don't have a
> > hissy when you read this comment about printing on the IE7 forum instead
> > of the other.
> > 2.) I have two HP Photosmart printers (a Photosmart 375 and a Photosmart
> > All-in-One 3310). After much trial and error I have been able to get
> > both to print by using the embedded drivers that came with the Vista
> > Beta2 disc. Do not try to install from the HP discs - it will not work -
> > the drivers will not install. At the "Printers" window from the control
> > panel click on "Add a Printer". Be sure your printer is USB connected
> > and turned on. Follow the wizard to add a printer. The key seems to be
> > that the USB printer port should be selected as a "Virtual Port" (not the
> > USB DOT4 Port). Pick the HP manufacturer and the model closest to your
> > printer's model number. Once the correct driver and the correct VIRTUAL
> > USB port is selected the printers both seem to work correctly for me.
> > Hope this helps.

>
>

  Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off