PC Review Forums Newsgroups Windows Vista Windows Vista Administration Can't Activate Windows

Reply

Can't Activate Windows

 
Thread Tools Rate Thread
Old 01-06-2006, 07:53 AM   #1
=?Utf-8?B?SmVmZjc1MDY=?=
Guest
 
Posts: n/a
Default Can't Activate Windows


Hello,

When i try to activate Vista Beta 2 i receive the following error in the
Event Log :

Log Name: Application
Source: Microsoft-Windows-Security-Licensing-SLC
Date: 01/06/2006 08:44:33
Event ID: 1010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: JXXXXX
Description:
Acquisition of Rights Account Certificate failed. hr=0x8007000D

Any clue ?

Thanks a lot for your help.

Regards
  Reply With Quote
Old 01-06-2006, 12:45 PM   #2
Zack Whittaker
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Login as an administrator, or *the* administrator:
http://www.vistabase.co.uk/welcome....localadminlogin

Looks like a permissions thing from the error report.

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
> Hello,
>
> When i try to activate Vista Beta 2 i receive the following error in the
> Event Log :
>
> Log Name: Application
> Source: Microsoft-Windows-Security-Licensing-SLC
> Date: 01/06/2006 08:44:33
> Event ID: 1010
> Task Category: None
> Level: Error
> Keywords: Classic
> User: N/A
> Computer: JXXXXX
> Description:
> Acquisition of Rights Account Certificate failed. hr=0x8007000D
>
> Any clue ?
>
> Thanks a lot for your help.
>
> Regards



  Reply With Quote
Old 01-06-2006, 05:51 PM   #3
=?Utf-8?B?SmVmZjc1MDY=?=
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Zack,

Thanks a lot for the reply.

I have admin right on the computer but it fail. I try the trick on your
execellent site to logon as THE adminitrator, but i don't was able to switch
to this user

Any other clue ?

Thanks alot for your help.

Regards



"Zack Whittaker" wrote:

> Login as an administrator, or *the* administrator:
> http://www.vistabase.co.uk/welcome....localadminlogin
>
> Looks like a permissions thing from the error report.
>
> --
> Zack Whittaker
> » ZackNET Enterprises: www.zacknet.co.uk
> » MSBlog on ResDev: www.msblog.org
> » Vista Knowledge Base: www.vistabase.co.uk
> » This mailing is provided "as is" with no warranties, and confers no
> rights. All opinions expressed are those of myself unless stated so, and not
> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
> that up!
>
> --: Original message follows :--
> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
> > Hello,
> >
> > When i try to activate Vista Beta 2 i receive the following error in the
> > Event Log :
> >
> > Log Name: Application
> > Source: Microsoft-Windows-Security-Licensing-SLC
> > Date: 01/06/2006 08:44:33
> > Event ID: 1010
> > Task Category: None
> > Level: Error
> > Keywords: Classic
> > User: N/A
> > Computer: JXXXXX
> > Description:
> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
> >
> > Any clue ?
> >
> > Thanks a lot for your help.
> >
> > Regards

>
>
>

  Reply With Quote
Old 02-06-2006, 01:29 AM   #4
Josh
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Jeff the problem is that Zach's Vista base is out of date. With the newer
build Microsoft is also diableing the built in administrator account as
well. So until you go into compmgmt.msc and enable the account you will not
be able to log on as the local administrator account.

As for the activation i know for a long time the activation server were
being hammered due to all the requests...so might be worth just retrying.

josh
http://windowsconnected.com

"Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
> Zack,
>
> Thanks a lot for the reply.
>
> I have admin right on the computer but it fail. I try the trick on your
> execellent site to logon as THE adminitrator, but i don't was able to
> switch
> to this user
>
> Any other clue ?
>
> Thanks alot for your help.
>
> Regards
>
>
>
> "Zack Whittaker" wrote:
>
>> Login as an administrator, or *the* administrator:
>> http://www.vistabase.co.uk/welcome....localadminlogin
>>
>> Looks like a permissions thing from the error report.
>>
>> --
>> Zack Whittaker
>> » ZackNET Enterprises: www.zacknet.co.uk
>> » MSBlog on ResDev: www.msblog.org
>> » Vista Knowledge Base: www.vistabase.co.uk
>> » This mailing is provided "as is" with no warranties, and confers no
>> rights. All opinions expressed are those of myself unless stated so, and
>> not
>> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
>> that up!
>>
>> --: Original message follows :--
>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>> > Hello,
>> >
>> > When i try to activate Vista Beta 2 i receive the following error in
>> > the
>> > Event Log :
>> >
>> > Log Name: Application
>> > Source: Microsoft-Windows-Security-Licensing-SLC
>> > Date: 01/06/2006 08:44:33
>> > Event ID: 1010
>> > Task Category: None
>> > Level: Error
>> > Keywords: Classic
>> > User: N/A
>> > Computer: JXXXXX
>> > Description:
>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>> >
>> > Any clue ?
>> >
>> > Thanks a lot for your help.
>> >
>> > Regards

>>
>>
>>



  Reply With Quote
Old 02-06-2006, 10:54 AM   #5
Jeff
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Ok so now i m able to login as "The" Administrator (Thanks josh) but i still
have the same issue.

I contact MSDN in france who say that Beta 2 cannot be activated as it's a
trial version....

What will happen in 11 days when the activation grace will expire ?

Any other clue ?



"Gabriel Lozano-Mor?n" <gabriel@pointerx.net> wrote in message
news:e81xCuchGHA.3900@TK2MSFTNGP05.phx.gbl...
> If you look at the details you will notice a time discrepancy of exactly
> two hours between the creation of the event and the datetime in the
> schema. My guess is that this is the problem.
>
> Gabriel Lozano-Morán
> The .NET Aficionado
> http://www.pointerx.net
>
>
> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
> news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
>> Zack,
>>
>> Thanks a lot for the reply.
>>
>> I have admin right on the computer but it fail. I try the trick on your
>> execellent site to logon as THE adminitrator, but i don't was able to
>> switch
>> to this user
>>
>> Any other clue ?
>>
>> Thanks alot for your help.
>>
>> Regards
>>
>>
>>
>> "Zack Whittaker" wrote:
>>
>>> Login as an administrator, or *the* administrator:
>>> http://www.vistabase.co.uk/welcome....localadminlogin
>>>
>>> Looks like a permissions thing from the error report.
>>>
>>> --
>>> Zack Whittaker
>>> » ZackNET Enterprises: www.zacknet.co.uk
>>> » MSBlog on ResDev: www.msblog.org
>>> » Vista Knowledge Base: www.vistabase.co.uk
>>> » This mailing is provided "as is" with no warranties, and confers no
>>> rights. All opinions expressed are those of myself unless stated so, and
>>> not
>>> of my employer, best friend, Ghandi, my mother or my cat. Glad we
>>> cleared
>>> that up!
>>>
>>> --: Original message follows :--
>>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>>> > Hello,
>>> >
>>> > When i try to activate Vista Beta 2 i receive the following error in
>>> > the
>>> > Event Log :
>>> >
>>> > Log Name: Application
>>> > Source: Microsoft-Windows-Security-Licensing-SLC
>>> > Date: 01/06/2006 08:44:33
>>> > Event ID: 1010
>>> > Task Category: None
>>> > Level: Error
>>> > Keywords: Classic
>>> > User: N/A
>>> > Computer: JXXXXX
>>> > Description:
>>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>>> >
>>> > Any clue ?
>>> >
>>> > Thanks a lot for your help.
>>> >
>>> > Regards
>>>
>>>
>>>

>
>


  Reply With Quote
Old 02-06-2006, 11:40 AM   #6
Zack Whittaker
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

How is it out of date? I've managed to run the administrator using that
article in Beta 2 :-s

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Josh" <josh@nospam-windowsconnected.com> wrote in message
news:uTOn2vdhGHA.4404@TK2MSFTNGP05.phx.gbl...
> Jeff the problem is that Zach's Vista base is out of date. With the newer
> build Microsoft is also diableing the built in administrator account as
> well. So until you go into compmgmt.msc and enable the account you will
> not be able to log on as the local administrator account.
>
> As for the activation i know for a long time the activation server were
> being hammered due to all the requests...so might be worth just retrying.
>
> josh
> http://windowsconnected.com
>
> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
> news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
>> Zack,
>>
>> Thanks a lot for the reply.
>>
>> I have admin right on the computer but it fail. I try the trick on your
>> execellent site to logon as THE adminitrator, but i don't was able to
>> switch
>> to this user
>>
>> Any other clue ?
>>
>> Thanks alot for your help.
>>
>> Regards
>>
>>
>>
>> "Zack Whittaker" wrote:
>>
>>> Login as an administrator, or *the* administrator:
>>> http://www.vistabase.co.uk/welcome....localadminlogin
>>>
>>> Looks like a permissions thing from the error report.
>>>
>>> --
>>> Zack Whittaker
>>> » ZackNET Enterprises: www.zacknet.co.uk
>>> » MSBlog on ResDev: www.msblog.org
>>> » Vista Knowledge Base: www.vistabase.co.uk
>>> » This mailing is provided "as is" with no warranties, and confers no
>>> rights. All opinions expressed are those of myself unless stated so, and
>>> not
>>> of my employer, best friend, Ghandi, my mother or my cat. Glad we
>>> cleared
>>> that up!
>>>
>>> --: Original message follows :--
>>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>>> > Hello,
>>> >
>>> > When i try to activate Vista Beta 2 i receive the following error in
>>> > the
>>> > Event Log :
>>> >
>>> > Log Name: Application
>>> > Source: Microsoft-Windows-Security-Licensing-SLC
>>> > Date: 01/06/2006 08:44:33
>>> > Event ID: 1010
>>> > Task Category: None
>>> > Level: Error
>>> > Keywords: Classic
>>> > User: N/A
>>> > Computer: JXXXXX
>>> > Description:
>>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>>> >
>>> > Any clue ?
>>> >
>>> > Thanks a lot for your help.
>>> >
>>> > Regards
>>>
>>>
>>>

>
>



  Reply With Quote
Old 02-06-2006, 03:46 PM   #7
Naseru
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

MSDN France is smoking some illegal substances (figure of speech, of
course).

I am running an MSDN version of Vista Beta 2 and I only activated it 3-4
days after the original installation date. --> So, yes, the MSDN versions
do require activation as well.

As for getting it to properly activate: was it a clean install? was it on a
clean partition? were there major hardware adjustments/changes between
installation date/time and activation attempts?

Submitting a bug report (following Andre's advice in this thread) would be
the last option... or re-installing Vista Beta 2 again on a
clean/reformatted partition.

- naseru

"Jeff" <Jean-francoism@avanade.com> wrote in message
news:559C60BD-236E-4E17-8A98-4AFF3CBF22E9@microsoft.com...
> Ok so now i m able to login as "The" Administrator (Thanks josh) but i
> still have the same issue.
>
> I contact MSDN in france who say that Beta 2 cannot be activated as it's a
> trial version....
>
> What will happen in 11 days when the activation grace will expire ?
>
> Any other clue ?
>
>
>
> "Gabriel Lozano-Mor?n" <gabriel@pointerx.net> wrote in message
> news:e81xCuchGHA.3900@TK2MSFTNGP05.phx.gbl...
>> If you look at the details you will notice a time discrepancy of exactly
>> two hours between the creation of the event and the datetime in the
>> schema. My guess is that this is the problem.
>>
>> Gabriel Lozano-Morán
>> The .NET Aficionado
>> http://www.pointerx.net
>>
>>
>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>> news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
>>> Zack,
>>>
>>> Thanks a lot for the reply.
>>>
>>> I have admin right on the computer but it fail. I try the trick on your
>>> execellent site to logon as THE adminitrator, but i don't was able to
>>> switch
>>> to this user
>>>
>>> Any other clue ?
>>>
>>> Thanks alot for your help.
>>>
>>> Regards
>>>
>>>
>>>
>>> "Zack Whittaker" wrote:
>>>
>>>> Login as an administrator, or *the* administrator:
>>>> http://www.vistabase.co.uk/welcome....localadminlogin
>>>>
>>>> Looks like a permissions thing from the error report.
>>>>
>>>> --
>>>> Zack Whittaker
>>>> » ZackNET Enterprises: www.zacknet.co.uk
>>>> » MSBlog on ResDev: www.msblog.org
>>>> » Vista Knowledge Base: www.vistabase.co.uk
>>>> » This mailing is provided "as is" with no warranties, and confers no
>>>> rights. All opinions expressed are those of myself unless stated so,
>>>> and not
>>>> of my employer, best friend, Ghandi, my mother or my cat. Glad we
>>>> cleared
>>>> that up!
>>>>
>>>> --: Original message follows :--
>>>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>>>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>>>> > Hello,
>>>> >
>>>> > When i try to activate Vista Beta 2 i receive the following error in
>>>> > the
>>>> > Event Log :
>>>> >
>>>> > Log Name: Application
>>>> > Source: Microsoft-Windows-Security-Licensing-SLC
>>>> > Date: 01/06/2006 08:44:33
>>>> > Event ID: 1010
>>>> > Task Category: None
>>>> > Level: Error
>>>> > Keywords: Classic
>>>> > User: N/A
>>>> > Computer: JXXXXX
>>>> > Description:
>>>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>>>> >
>>>> > Any clue ?
>>>> >
>>>> > Thanks a lot for your help.
>>>> >
>>>> > Regards
>>>>
>>>>
>>>>

>>
>>

>


  Reply With Quote
Old 02-06-2006, 11:33 PM   #8
Gabriel Lozano-Morán
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

If you look at the details you will notice a time discrepancy of exactly two
hours between the creation of the event and the datetime in the schema. My
guess is that this is the problem.

Gabriel Lozano-Morán
The .NET Aficionado
http://www.pointerx.net


"Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
> Zack,
>
> Thanks a lot for the reply.
>
> I have admin right on the computer but it fail. I try the trick on your
> execellent site to logon as THE adminitrator, but i don't was able to
> switch
> to this user
>
> Any other clue ?
>
> Thanks alot for your help.
>
> Regards
>
>
>
> "Zack Whittaker" wrote:
>
>> Login as an administrator, or *the* administrator:
>> http://www.vistabase.co.uk/welcome....localadminlogin
>>
>> Looks like a permissions thing from the error report.
>>
>> --
>> Zack Whittaker
>> » ZackNET Enterprises: www.zacknet.co.uk
>> » MSBlog on ResDev: www.msblog.org
>> » Vista Knowledge Base: www.vistabase.co.uk
>> » This mailing is provided "as is" with no warranties, and confers no
>> rights. All opinions expressed are those of myself unless stated so, and
>> not
>> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
>> that up!
>>
>> --: Original message follows :--
>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>> > Hello,
>> >
>> > When i try to activate Vista Beta 2 i receive the following error in
>> > the
>> > Event Log :
>> >
>> > Log Name: Application
>> > Source: Microsoft-Windows-Security-Licensing-SLC
>> > Date: 01/06/2006 08:44:33
>> > Event ID: 1010
>> > Task Category: None
>> > Level: Error
>> > Keywords: Classic
>> > User: N/A
>> > Computer: JXXXXX
>> > Description:
>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>> >
>> > Any clue ?
>> >
>> > Thanks a lot for your help.
>> >
>> > Regards

>>
>>
>>



  Reply With Quote
Old 03-06-2006, 12:13 PM   #9
Jeff
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Hello All

Yes it was a clean istall. No Hardware changes.

I try changing time and loctaion, I try with another product key but without
any sucess.

How can i report bug ?
Because the link provided are more feeback than bug reporting.

Thanks a lot for your help.

Best regards



"Jeff" <Jean-francoism@avanade.com> wrote in message
news:559C60BD-236E-4E17-8A98-4AFF3CBF22E9@microsoft.com...
> Ok so now i m able to login as "The" Administrator (Thanks josh) but i
> still have the same issue.
>
> I contact MSDN in france who say that Beta 2 cannot be activated as it's a
> trial version....
>
> What will happen in 11 days when the activation grace will expire ?
>
> Any other clue ?
>
>
>
> "Gabriel Lozano-Mor?n" <gabriel@pointerx.net> wrote in message
> news:e81xCuchGHA.3900@TK2MSFTNGP05.phx.gbl...
>> If you look at the details you will notice a time discrepancy of exactly
>> two hours between the creation of the event and the datetime in the
>> schema. My guess is that this is the problem.
>>
>> Gabriel Lozano-Morán
>> The .NET Aficionado
>> http://www.pointerx.net
>>
>>
>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>> news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
>>> Zack,
>>>
>>> Thanks a lot for the reply.
>>>
>>> I have admin right on the computer but it fail. I try the trick on your
>>> execellent site to logon as THE adminitrator, but i don't was able to
>>> switch
>>> to this user
>>>
>>> Any other clue ?
>>>
>>> Thanks alot for your help.
>>>
>>> Regards
>>>
>>>
>>>
>>> "Zack Whittaker" wrote:
>>>
>>>> Login as an administrator, or *the* administrator:
>>>> http://www.vistabase.co.uk/welcome....localadminlogin
>>>>
>>>> Looks like a permissions thing from the error report.
>>>>
>>>> --
>>>> Zack Whittaker
>>>> » ZackNET Enterprises: www.zacknet.co.uk
>>>> » MSBlog on ResDev: www.msblog.org
>>>> » Vista Knowledge Base: www.vistabase.co.uk
>>>> » This mailing is provided "as is" with no warranties, and confers no
>>>> rights. All opinions expressed are those of myself unless stated so,
>>>> and not
>>>> of my employer, best friend, Ghandi, my mother or my cat. Glad we
>>>> cleared
>>>> that up!
>>>>
>>>> --: Original message follows :--
>>>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>>>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>>>> > Hello,
>>>> >
>>>> > When i try to activate Vista Beta 2 i receive the following error in
>>>> > the
>>>> > Event Log :
>>>> >
>>>> > Log Name: Application
>>>> > Source: Microsoft-Windows-Security-Licensing-SLC
>>>> > Date: 01/06/2006 08:44:33
>>>> > Event ID: 1010
>>>> > Task Category: None
>>>> > Level: Error
>>>> > Keywords: Classic
>>>> > User: N/A
>>>> > Computer: JXXXXX
>>>> > Description:
>>>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>>>> >
>>>> > Any clue ?
>>>> >
>>>> > Thanks a lot for your help.
>>>> >
>>>> > Regards
>>>>
>>>>
>>>>

>>
>>

>


  Reply With Quote
Old 03-06-2006, 06:10 PM   #10
Gabriel Lozano-Morán
Guest
 
Posts: n/a
Default Re: Can't Activate Windows

Have you tried changing the timezones back to and trying to reactivate? I am
just curious where the 2 hour difference comes from.

Gabriel

"Jeff" <Jean-francoism@avanade.com> wrote in message
news:559C60BD-236E-4E17-8A98-4AFF3CBF22E9@microsoft.com...
> Ok so now i m able to login as "The" Administrator (Thanks josh) but i
> still have the same issue.
>
> I contact MSDN in france who say that Beta 2 cannot be activated as it's a
> trial version....
>
> What will happen in 11 days when the activation grace will expire ?
>
> Any other clue ?
>
>
>
> "Gabriel Lozano-Mor?n" <gabriel@pointerx.net> wrote in message
> news:e81xCuchGHA.3900@TK2MSFTNGP05.phx.gbl...
>> If you look at the details you will notice a time discrepancy of exactly
>> two hours between the creation of the event and the datetime in the
>> schema. My guess is that this is the problem.
>>
>> Gabriel Lozano-Morán
>> The .NET Aficionado
>> http://www.pointerx.net
>>
>>
>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>> news:100F2949-A731-4121-A6FC-B2F7FC2586AF@microsoft.com...
>>> Zack,
>>>
>>> Thanks a lot for the reply.
>>>
>>> I have admin right on the computer but it fail. I try the trick on your
>>> execellent site to logon as THE adminitrator, but i don't was able to
>>> switch
>>> to this user
>>>
>>> Any other clue ?
>>>
>>> Thanks alot for your help.
>>>
>>> Regards
>>>
>>>
>>>
>>> "Zack Whittaker" wrote:
>>>
>>>> Login as an administrator, or *the* administrator:
>>>> http://www.vistabase.co.uk/welcome....localadminlogin
>>>>
>>>> Looks like a permissions thing from the error report.
>>>>
>>>> --
>>>> Zack Whittaker
>>>> » ZackNET Enterprises: www.zacknet.co.uk
>>>> » MSBlog on ResDev: www.msblog.org
>>>> » Vista Knowledge Base: www.vistabase.co.uk
>>>> » This mailing is provided "as is" with no warranties, and confers no
>>>> rights. All opinions expressed are those of myself unless stated so,
>>>> and not
>>>> of my employer, best friend, Ghandi, my mother or my cat. Glad we
>>>> cleared
>>>> that up!
>>>>
>>>> --: Original message follows :--
>>>> "Jeff7506" <Jeff7506@discussions.microsoft.com> wrote in message
>>>> news:11335ACD-9256-4E75-98E7-1A1FC07A3E7A@microsoft.com...
>>>> > Hello,
>>>> >
>>>> > When i try to activate Vista Beta 2 i receive the following error in
>>>> > the
>>>> > Event Log :
>>>> >
>>>> > Log Name: Application
>>>> > Source: Microsoft-Windows-Security-Licensing-SLC
>>>> > Date: 01/06/2006 08:44:33
>>>> > Event ID: 1010
>>>> > Task Category: None
>>>> > Level: Error
>>>> > Keywords: Classic
>>>> > User: N/A
>>>> > Computer: JXXXXX
>>>> > Description:
>>>> > Acquisition of Rights Account Certificate failed. hr=0x8007000D
>>>> >
>>>> > Any clue ?
>>>> >
>>>> > Thanks a lot for your help.
>>>> >
>>>> > Regards
>>>>
>>>>
>>>>

>>
>>

>



  Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off