Monitor turns off computer running?

I have Beta 2 installed and after about 4 min. the monitor turns off but it
looks like the computer is still on. I checked all power settings and have
monitor and hard drive set to 1 hour. Hit enter or moveing the mouse does
nothing. I end up having to hit reset button and it only happens again.

Could well be a graphics card issue... are you running with the latest
drivers?

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news:AA9FCF25-666E-453A-9052-D9F45FE31A47@microsoft.com...
>I have Beta 2 installed and after about 4 min. the monitor turns off but it
> looks like the computer is still on. I checked all power settings and have
> monitor and hard drive set to 1 hour. Hit enter or moveing the mouse does
> nothing. I end up having to hit reset button and it only happens again.

Could you give us some information on your system specs? I would also check
the settings for Sleep and also set that to 1 hour.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news:AA9FCF25-666E-453A-9052-D9F45FE31A47@microsoft.com...
>I have Beta 2 installed and after about 4 min. the monitor turns off but it
> looks like the computer is still on. I checked all power settings and have
> monitor and hard drive set to 1 hour. Hit enter or moveing the mouse does
> nothing. I end up having to hit reset button and it only happens again.

I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with 2GB
mem. It has been on now for about an hour. It can raddomly turn the monitor
off when I click on something. I can't seem to turn it back on unless I push
the reset button.

"Andre Da Costa [Extended64]" wrote:

> Could you give us some information on your system specs? I would also check
> the settings for Sleep and also set that to 1 hour.
> --
> --
> Andre
> Windows Connected | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
> news:AA9FCF25-666E-453A-9052-D9F45FE31A47@microsoft.com...
> >I have Beta 2 installed and after about 4 min. the monitor turns off but it
> > looks like the computer is still on. I checked all power settings and have
> > monitor and hard drive set to 1 hour. Hit enter or moveing the mouse does
> > nothing. I end up having to hit reset button and it only happens again.
>
>
>

If your using a LCD panel and a DVI connection, try using the VGA cable
instead. It's known DVI and Catalyst drivers cause problems for many. Just
check out the Rage3d.com Catalyst/Radeon forums.

"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news:34DF74CC-EC6D-4079-ADEA-E64AC0A572FD@microsoft.com...
>I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with 2GB
> mem. It has been on now for about an hour. It can raddomly turn the
> monitor
> off when I click on something. I can't seem to turn it back on unless I
> push
> the reset button.
>
>

I'm using a BNC connector which has HD support. It is a Sony GDM-FW900, a
24" flat widescreen tube model. 7 installs later (yes, 7) I've noticed that
it gets cut off when the hard drive is trying to access something like when I
try to install software. The monitor turns off like it gets cut off but the
computer stays on. I try to turn on the monitor but no signal. Funny thing is
that it is not consistant. It did this on 5365 as well.

"Peter M" wrote:

> If your using a LCD panel and a DVI connection, try using the VGA cable
> instead. It's known DVI and Catalyst drivers cause problems for many. Just
> check out the Rage3d.com Catalyst/Radeon forums.
>
> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
> news:34DF74CC-EC6D-4079-ADEA-E64AC0A572FD@microsoft.com...
> >I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with 2GB
> > mem. It has been on now for about an hour. It can raddomly turn the
> > monitor
> > off when I click on something. I can't seem to turn it back on unless I
> > push
> > the reset button.
> >
> >
>
>
>

"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news:AA9FCF25-666E-453A-9052-D9F45FE31A47@microsoft.com...
>I have Beta 2 installed and after about 4 min. the monitor turns off but it
> looks like the computer is still on. I checked all power settings and have
> monitor and hard drive set to 1 hour. Hit enter or moveing the mouse does
> nothing. I end up having to hit reset button and it only happens again.


I am glad people are helping, but isn't this message more meant for another
Vista group as the title of this group is performance-maintance and doesn't
have anything to do with like other problems or other areas?

"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news25C5743-8C21-4B81-BF05-384B111CB6EA@microsoft.com...
> I'm using a BNC connector which has HD support. It is a Sony GDM-FW900, a
> 24" flat widescreen tube model. 7 installs later (yes, 7) I've noticed
> that
> it gets cut off when the hard drive is trying to access something like
> when I
> try to install software. The monitor turns off like it gets cut off but
> the
> computer stays on. I try to turn on the monitor but no signal. Funny thing
> is
> that it is not consistant. It did this on 5365 as well.
>
> "Peter M" wrote:
>
>> If your using a LCD panel and a DVI connection, try using the VGA cable
>> instead. It's known DVI and Catalyst drivers cause problems for many.
>> Just
>> check out the Rage3d.com Catalyst/Radeon forums.
>>
>> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
>> news:34DF74CC-EC6D-4079-ADEA-E64AC0A572FD@microsoft.com...
>> >I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with
>> >2GB
>> > mem. It has been on now for about an hour. It can raddomly turn the
>> > monitor
>> > off when I click on something. I can't seem to turn it back on unless I
>> > push
>> > the reset button.
>> >
>> >
>>
>>
>>


Try the mon on another pc, use another video card, use another OS and let us
know.

Thanks AMDX2 for the suggestions. It works with XP Pro and 2000. What other
group should I try. I am very grateful for your suggestions.
Thanks
"AMDX2" wrote:

> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
> news25C5743-8C21-4B81-BF05-384B111CB6EA@microsoft.com...
> > I'm using a BNC connector which has HD support. It is a Sony GDM-FW900, a
> > 24" flat widescreen tube model. 7 installs later (yes, 7) I've noticed
> > that
> > it gets cut off when the hard drive is trying to access something like
> > when I
> > try to install software. The monitor turns off like it gets cut off but
> > the
> > computer stays on. I try to turn on the monitor but no signal. Funny thing
> > is
> > that it is not consistant. It did this on 5365 as well.
> >
> > "Peter M" wrote:
> >
> >> If your using a LCD panel and a DVI connection, try using the VGA cable
> >> instead. It's known DVI and Catalyst drivers cause problems for many.
> >> Just
> >> check out the Rage3d.com Catalyst/Radeon forums.
> >>
> >> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
> >> news:34DF74CC-EC6D-4079-ADEA-E64AC0A572FD@microsoft.com...
> >> >I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with
> >> >2GB
> >> > mem. It has been on now for about an hour. It can raddomly turn the
> >> > monitor
> >> > off when I click on something. I can't seem to turn it back on unless I
> >> > push
> >> > the reset button.
> >> >
> >> >
> >>
> >>
> >>
>
>
> Try the mon on another pc, use another video card, use another OS and let us
> know.
>

"kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
news:FCD39FD6-97CA-4EAD-935F-7C8CCC609BAA@microsoft.com...
> Thanks AMDX2 for the suggestions. It works with XP Pro and 2000. What
> other
> group should I try. I am very grateful for your suggestions.
> Thanks
> "AMDX2" wrote:
>
>> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
>> news25C5743-8C21-4B81-BF05-384B111CB6EA@microsoft.com...
>> > I'm using a BNC connector which has HD support. It is a Sony
>> > GDM-FW900, a
>> > 24" flat widescreen tube model. 7 installs later (yes, 7) I've noticed
>> > that
>> > it gets cut off when the hard drive is trying to access something like
>> > when I
>> > try to install software. The monitor turns off like it gets cut off but
>> > the
>> > computer stays on. I try to turn on the monitor but no signal. Funny
>> > thing
>> > is
>> > that it is not consistant. It did this on 5365 as well.
>> >
>> > "Peter M" wrote:
>> >
>> >> If your using a LCD panel and a DVI connection, try using the VGA
>> >> cable
>> >> instead. It's known DVI and Catalyst drivers cause problems for many.
>> >> Just
>> >> check out the Rage3d.com Catalyst/Radeon forums.
>> >>
>> >> "kcmc20" <kcmc20@discussions.microsoft.com> wrote in message
>> >> news:34DF74CC-EC6D-4079-ADEA-E64AC0A572FD@microsoft.com...
>> >> >I have the latest ATI drivers. I have a AIW 9700. Intel 3G proc. with
>> >> >2GB
>> >> > mem. It has been on now for about an hour. It can raddomly turn the
>> >> > monitor
>> >> > off when I click on something. I can't seem to turn it back on
>> >> > unless I
>> >> > push
>> >> > the reset button.
>> >> >
>> >> >
>> >>
>> >>
>> >>
>>
>>
>> Try the mon on another pc, use another video card, use another OS and let
>> us
>> know.
>>


You found a good group, I saw your post in the other vista hardware group.
I really do hope that you can get it working. I've no clue what it could be
unless I was having the same thing so I could trouble shoot myself. Then I
might figure something out.