PC Review Forums Newsgroups Windows Vista Windows Vista Hardware Re: Nforce 4

Reply

Re: Nforce 4

 
Thread Tools Rate Thread
Old 04-03-2006, 03:38 PM   #1
Jeff Goldner [MS]
Guest
 
Posts: n/a
Default Re: Nforce 4


You will need to load the nVidia drivers for the SATA controller. These are
not included inbox. Contact nVidia for more information and instructions on
how to add these drivers - it's tricky at best.

"Piglet" <piglet_i_am@hotmail.com> wrote in message
news:%23ZqhyqeOGHA.2740@TK2MSFTNGP12.phx.gbl...
> How could i create a new partition when it does´nt find my harddrive ??
> You cant create a partiton if there are no hardrive. i have 4 partitions
> but none of these are found during install.
>
> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
> news:1156C869-476F-4606-9F62-FC43E25701B7@microsoft.com...
>> Just create another partition within windows and install Vista to that
>> partition, should be easy enough
>>
>>
>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>> news:egKthVTOGHA.3508@TK2MSFTNGP10.phx.gbl...
>>>I have a Dell XPS 600 witj Nvidia Nforce 4 motherboard and i cant install
>>>vista. it does´nt find my sATA disks. Any one have new drivers or beta
>>>drivers or any otcher ide ?
>>>
>>> //Piglet
>>>

>>

>
>



  Reply With Quote
Old 04-03-2006, 07:39 PM   #2
Clayton
Guest
 
Posts: n/a
Default Re: Nforce 4

Can you boot up the system to XP? if so create another partition and install
Vista to it.
The only time you need SATA drivers is when the HDD is completely raw.



"Jeff Goldner [MS]" <jeffgo@iworkatmicrosoft> wrote in message
news:%23QqUYo6PGHA.164@TK2MSFTNGP12.phx.gbl...
> You will need to load the nVidia drivers for the SATA controller. These
> are not included inbox. Contact nVidia for more information and
> instructions on how to add these drivers - it's tricky at best.
>
> "Piglet" <piglet_i_am@hotmail.com> wrote in message
> news:%23ZqhyqeOGHA.2740@TK2MSFTNGP12.phx.gbl...
>> How could i create a new partition when it does´nt find my harddrive ??
>> You cant create a partiton if there are no hardrive. i have 4 partitions
>> but none of these are found during install.
>>
>> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
>> news:1156C869-476F-4606-9F62-FC43E25701B7@microsoft.com...
>>> Just create another partition within windows and install Vista to that
>>> partition, should be easy enough
>>>
>>>
>>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>>> news:egKthVTOGHA.3508@TK2MSFTNGP10.phx.gbl...
>>>>I have a Dell XPS 600 witj Nvidia Nforce 4 motherboard and i cant
>>>>install vista. it does´nt find my sATA disks. Any one have new drivers
>>>>or beta drivers or any otcher ide ?
>>>>
>>>> //Piglet
>>>>
>>>

>>
>>

>
>


  Reply With Quote
Old 05-03-2006, 12:18 PM   #3
Piglet
Guest
 
Posts: n/a
Default Re: Nforce 4

I tryed to start insatt from windows XP and it starts installing but after
it restarts i get a BSOD and it´s complaining on harddrive that it maybe
need som drivers. Nvidia does´nt have any drivers at the moment eather.

Mybe next CTP will work.....

"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:0A8EE84E-05F3-48CF-B9A7-E7582E832167@microsoft.com...
> Can you boot up the system to XP? if so create another partition and
> install Vista to it.
> The only time you need SATA drivers is when the HDD is completely raw.
>
>
>
> "Jeff Goldner [MS]" <jeffgo@iworkatmicrosoft> wrote in message
> news:%23QqUYo6PGHA.164@TK2MSFTNGP12.phx.gbl...
>> You will need to load the nVidia drivers for the SATA controller. These
>> are not included inbox. Contact nVidia for more information and
>> instructions on how to add these drivers - it's tricky at best.
>>
>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>> news:%23ZqhyqeOGHA.2740@TK2MSFTNGP12.phx.gbl...
>>> How could i create a new partition when it does´nt find my harddrive ??
>>> You cant create a partiton if there are no hardrive. i have 4 partitions
>>> but none of these are found during install.
>>>
>>> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
>>> news:1156C869-476F-4606-9F62-FC43E25701B7@microsoft.com...
>>>> Just create another partition within windows and install Vista to that
>>>> partition, should be easy enough
>>>>
>>>>
>>>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>>>> news:egKthVTOGHA.3508@TK2MSFTNGP10.phx.gbl...
>>>>>I have a Dell XPS 600 witj Nvidia Nforce 4 motherboard and i cant
>>>>>install vista. it does´nt find my sATA disks. Any one have new drivers
>>>>>or beta drivers or any otcher ide ?
>>>>>
>>>>> //Piglet
>>>>>
>>>>
>>>
>>>

>>
>>

>



  Reply With Quote
Old 13-04-2006, 02:00 PM   #4
Paul Kiddie
Guest
 
Posts: n/a
Default Re: Nforce 4

Hi,
I had a similar problem with installing Vista on my RAIDED SATA drives, I've
got a NForce 3 motherboard but I guess this also applies to Nforce2/4 RAID
sets. I got round this by:
- Downloading the latest Nforce 4 driver pack from the Nvidia website.
- Extracting the driver pack, and then browsing to <extracted
dir>/IDE/WinXP/legacy. Copy all the files from this directory onto a blank
floppy.
- Insert the Vista CD and do install from within WinXP. I attempted an
install from booting from the Vista CD and it crashed trying to load in the
extra RAID drivers.
- When it asks you what installation to do, select Custom and install onto a
freshly created partition for Vista.
- There should be an option to load driver files. Make sure you select this,
and with the driver disk inserted, select one of the 'nvraid.inf' and one of
the 'nvatabus.inf' options given. For some reason in my install I couldnt
see the 'nvatabus.inf' option so I had to unhide 'incompatible' hardware
You'll need to do this twice, one for the nvraid.inf and one for the
nvatabus.inf options
- Then carry on installing as normal
- When Vista reboots, you shouldnt get the blue screen. I got a bluescreen
when attempting to install Vista from my old NForce 3 NVRAID floppy disk,
but the drivers from the latest Nforce 4 driver pack seem to work like a
treat.

Paul

"Piglet" <piglet_i_am@hotmail.com> wrote in message
news:us%23FadFQGHA.2256@TK2MSFTNGP11.phx.gbl...
>I tryed to start insatt from windows XP and it starts installing but after
>it restarts i get a BSOD and it´s complaining on harddrive that it maybe
>need som drivers. Nvidia does´nt have any drivers at the moment eather.
>
> Mybe next CTP will work.....
>
> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
> news:0A8EE84E-05F3-48CF-B9A7-E7582E832167@microsoft.com...
>> Can you boot up the system to XP? if so create another partition and
>> install Vista to it.
>> The only time you need SATA drivers is when the HDD is completely raw.
>>
>>
>>
>> "Jeff Goldner [MS]" <jeffgo@iworkatmicrosoft> wrote in message
>> news:%23QqUYo6PGHA.164@TK2MSFTNGP12.phx.gbl...
>>> You will need to load the nVidia drivers for the SATA controller. These
>>> are not included inbox. Contact nVidia for more information and
>>> instructions on how to add these drivers - it's tricky at best.
>>>
>>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>>> news:%23ZqhyqeOGHA.2740@TK2MSFTNGP12.phx.gbl...
>>>> How could i create a new partition when it does´nt find my harddrive ??
>>>> You cant create a partiton if there are no hardrive. i have 4
>>>> partitions but none of these are found during install.
>>>>
>>>> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
>>>> news:1156C869-476F-4606-9F62-FC43E25701B7@microsoft.com...
>>>>> Just create another partition within windows and install Vista to that
>>>>> partition, should be easy enough
>>>>>
>>>>>
>>>>> "Piglet" <piglet_i_am@hotmail.com> wrote in message
>>>>> news:egKthVTOGHA.3508@TK2MSFTNGP10.phx.gbl...
>>>>>>I have a Dell XPS 600 witj Nvidia Nforce 4 motherboard and i cant
>>>>>>install vista. it does´nt find my sATA disks. Any one have new drivers
>>>>>>or beta drivers or any otcher ide ?
>>>>>>
>>>>>> //Piglet
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>>

>>

>
>


  Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off