PC Review Forums Newsgroups Windows Vista Windows Vista Installation CD/DVD driver RC1

Reply

CD/DVD driver RC1
 
Thread Tools Rate Thread
Old 15-09-2006, 04:42 PM   #1
=?Utf-8?B?bWFya3A=?=
Guest
 
Posts: n/a
Default CD/DVD driver RC1


I see several posts similar to my experience:

I have an NEC ND-2100AD DVD+RW. Computer boots off Vista RC1 DVD I burned,
it loads to install screen, and then Vista reports "A required CD/DVD drive
device driver is missing". No compatible drives are listed and install must
be aborted.

Except what's odd is Vista Beta2 installed just fine in the exact same
way... what changed?
  Reply With Quote
Old 19-09-2006, 10:06 PM   #2
=?Utf-8?B?Z29yZ29s?=
Guest
 
Posts: n/a
Default RE: CD/DVD driver RC1
I had the same problem, except I have a Lite-on SOHW-832S. I replaced the 40
wire ribbon cable to the drive with an 80 wire cable and RC1 installed.

"markp" wrote:

> I see several posts similar to my experience:
>
> I have an NEC ND-2100AD DVD+RW. Computer boots off Vista RC1 DVD I burned,
> it loads to install screen, and then Vista reports "A required CD/DVD drive
> device driver is missing". No compatible drives are listed and install must
> be aborted.
>
> Except what's odd is Vista Beta2 installed just fine in the exact same
> way... what changed?
  Reply With Quote
Reply

Archive


Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off