5308 an internal error occurred while displaying the image selection wizard

I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
supported, yet I still get the error:
an internal error occurred while displaying the image selection wizard
Got 5308 working in VMWare, but not on actual computer. Thought it would be
the other way around. Any help would be much appreciated. All the web
forums suggested newgroups for answer, yet I don't see this issue listed.
Thanks

Are you running 5308 from MSDN, the first download from Connect (the one
released 2 weeks ago) or the new downloaded build which was put up there
only a few days ago?

--
Zack Whittaker
Microsoft Beta (Windows Server R2 Beta Mentor)
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: http://msblog.resdev.net
» ZackNET Forum: www.zacknet.co.uk/forum
» VistaBase: www.zacknet.co.uk/vistabase
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, mother or cat. Let's be clear on that one!


--- Original message follows ---
"blahblahblahh" <m.meledandri@gamil.com> wrote in message
news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>supported, yet I still get the error:
> an internal error occurred while displaying the image selection wizard
> Got 5308 working in VMWare, but not on actual computer. Thought it would
> be the other way around. Any help would be much appreciated. All the web
> forums suggested newgroups for answer, yet I don't see this issue listed.
> Thanks
>
>

Could you specify the brand DVD blank you burnt the ISO to? There have been
issues with DVD-R media. What speed did you burn the ISO at? Try burning it
at lower speed 1x to 2x
Also, could you post the setup log here:
$windows.~bt\sources\panther\setupact.log
--
--
Andre
Windows Connect | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"blahblahblahh" <m.meledandri@gamil.com> wrote in message
news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>supported, yet I still get the error:
> an internal error occurred while displaying the image selection wizard
> Got 5308 working in VMWare, but not on actual computer. Thought it would
> be the other way around. Any help would be much appreciated. All the web
> forums suggested newgroups for answer, yet I don't see this issue listed.
> Thanks
>
>

I am running the first release from Connect. Installs and runs fine in
VMWare.
"Zack Whittaker (R2 Mentor)" <admin@zacknet.co.uk> wrote in message
news:eW65q9pQGHA.3460@TK2MSFTNGP15.phx.gbl...
> Are you running 5308 from MSDN, the first download from Connect (the one
> released 2 weeks ago) or the new downloaded build which was put up there
> only a few days ago?
>
> --
> Zack Whittaker
> Microsoft Beta (Windows Server R2 Beta Mentor)
> » ZackNET Enterprises: www.zacknet.co.uk
> » MSBlog on ResDev: http://msblog.resdev.net
> » ZackNET Forum: www.zacknet.co.uk/forum
> » VistaBase: www.zacknet.co.uk/vistabase
> » This mailing is provided "as is" with no warranties, and confers no
> rights. All opinions expressed are those of myself unless stated so, and
> not
> of my employer, best friend, mother or cat. Let's be clear on that one!
>
>
> --- Original message follows ---
> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
> news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>>supported, yet I still get the error:
>> an internal error occurred while displaying the image selection wizard
>> Got 5308 working in VMWare, but not on actual computer. Thought it would
>> be the other way around. Any help would be much appreciated. All the
>> web forums suggested newgroups for answer, yet I don't see this issue
>> listed. Thanks
>>
>>
>
>

I used a Sony DRU-720A to burn Sony DVD-R with Nero Burning ROM 7.0.5.4.
"Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
news:OPc$7ZrQGHA.1204@TK2MSFTNGP12.phx.gbl...
> Could you specify the brand DVD blank you burnt the ISO to? There have
> been issues with DVD-R media. What speed did you burn the ISO at? Try
> burning it at lower speed 1x to 2x
> Also, could you post the setup log here:
> $windows.~bt\sources\panther\setupact.log
> --
> --
> Andre
> Windows Connect | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
> news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>>supported, yet I still get the error:
>> an internal error occurred while displaying the image selection wizard
>> Got 5308 working in VMWare, but not on actual computer. Thought it would
>> be the other way around. Any help would be much appreciated. All the
>> web forums suggested newgroups for answer, yet I don't see this issue
>> listed. Thanks
>>
>>
>
>

See if you can download the latest one, or re-burning the image you already
have on a very low setting. If there's an option to verify data, use that as
well.

--
Zack Whittaker
Microsoft Beta (Windows Server R2 Beta Mentor)
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: http://msblog.resdev.net
» ZackNET Forum: www.zacknet.co.uk/forum
» VistaBase: www.zacknet.co.uk/vistabase
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, mother or cat. Let's be clear on that one!


--- Original message follows ---
"blahblahblahh" <m.meledandri@gamil.com> wrote in message
news:OtzhV9sQGHA.1160@TK2MSFTNGP09.phx.gbl...
>I am running the first release from Connect. Installs and runs fine in
>VMWare.
> "Zack Whittaker (R2 Mentor)" <admin@zacknet.co.uk> wrote in message
> news:eW65q9pQGHA.3460@TK2MSFTNGP15.phx.gbl...
>> Are you running 5308 from MSDN, the first download from Connect (the one
>> released 2 weeks ago) or the new downloaded build which was put up there
>> only a few days ago?
>>
>> --
>> Zack Whittaker
>> Microsoft Beta (Windows Server R2 Beta Mentor)
>> » ZackNET Enterprises: www.zacknet.co.uk
>> » MSBlog on ResDev: http://msblog.resdev.net
>> » ZackNET Forum: www.zacknet.co.uk/forum
>> » VistaBase: www.zacknet.co.uk/vistabase
>> » This mailing is provided "as is" with no warranties, and confers no
>> rights. All opinions expressed are those of myself unless stated so, and
>> not
>> of my employer, best friend, mother or cat. Let's be clear on that one!
>>
>>
>> --- Original message follows ---
>> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
>> news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>>>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>>>supported, yet I still get the error:
>>> an internal error occurred while displaying the image selection wizard
>>> Got 5308 working in VMWare, but not on actual computer. Thought it
>>> would be the other way around. Any help would be much appreciated. All
>>> the web forums suggested newgroups for answer, yet I don't see this
>>> issue listed. Thanks
>>>
>>>
>>
>>
>
>

Well, I did mention there were issues with DVD-R media, and I did say burn
at a low speed. If you have a computer or know anybody with a PC that has a
DVD+RW burner, back up the ISO for the Vista build as a data file and burn
it on another computer to see if it corrects the issue. And where is the
$windows.~bt\sources\panther\setupact.log I requested?
--
--
Andre
Windows Connect | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"blahblahblahh" <m.meledandri@gamil.com> wrote in message
news:eg4IAAtQGHA.5500@TK2MSFTNGP12.phx.gbl...
>I used a Sony DRU-720A to burn Sony DVD-R with Nero Burning ROM 7.0.5.4.
> "Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
> news:OPc$7ZrQGHA.1204@TK2MSFTNGP12.phx.gbl...
>> Could you specify the brand DVD blank you burnt the ISO to? There have
>> been issues with DVD-R media. What speed did you burn the ISO at? Try
>> burning it at lower speed 1x to 2x
>> Also, could you post the setup log here:
>> $windows.~bt\sources\panther\setupact.log
>> --
>> --
>> Andre
>> Windows Connect | http://www.windowsconnected.com
>> Extended64 | http://www.extended64.com
>> Blog | http://www.extended64.com/blogs/andre
>> http://spaces.msn.com/members/adacosta
>>
>> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
>> news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>>>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>>>supported, yet I still get the error:
>>> an internal error occurred while displaying the image selection wizard
>>> Got 5308 working in VMWare, but not on actual computer. Thought it
>>> would be the other way around. Any help would be much appreciated. All
>>> the web forums suggested newgroups for answer, yet I don't see this
>>> issue listed. Thanks
>>>
>>>
>>
>>
>
>

Zack
Thanks for the tips. I did burn the new 5308.60 version at the lowest (4x)
speed avilable in the newest Nero version 7.0.8.2 with my Sony DRU-720A
burner upgraded with the latest firmware onto a Sony DVD-R.

I still get the same error. Should I be extracting the iso image to a
folder, then burning the folder contents as a data disc? I have currently
only burned the DVD ISO image as an image with Nero. Any other suggestions
would be much appreciated.
Thanks,
Marc
"Zack Whittaker (R2 Mentor)" <admin@zacknet.co.uk> wrote in message
news:OTp7y4tQGHA.5924@TK2MSFTNGP09.phx.gbl...
> See if you can download the latest one, or re-burning the image you
> already have on a very low setting. If there's an option to verify data,
> use that as well.
>
> --
> Zack Whittaker
> Microsoft Beta (Windows Server R2 Beta Mentor)
> » ZackNET Enterprises: www.zacknet.co.uk
> » MSBlog on ResDev: http://msblog.resdev.net
> » ZackNET Forum: www.zacknet.co.uk/forum
> » VistaBase: www.zacknet.co.uk/vistabase
> » This mailing is provided "as is" with no warranties, and confers no
> rights. All opinions expressed are those of myself unless stated so, and
> not
> of my employer, best friend, mother or cat. Let's be clear on that one!
>
>
> --- Original message follows ---
> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
> news:OtzhV9sQGHA.1160@TK2MSFTNGP09.phx.gbl...
>>I am running the first release from Connect. Installs and runs fine in
>>VMWare.
>> "Zack Whittaker (R2 Mentor)" <admin@zacknet.co.uk> wrote in message
>> news:eW65q9pQGHA.3460@TK2MSFTNGP15.phx.gbl...
>>> Are you running 5308 from MSDN, the first download from Connect (the one
>>> released 2 weeks ago) or the new downloaded build which was put up there
>>> only a few days ago?
>>>
>>> --
>>> Zack Whittaker
>>> Microsoft Beta (Windows Server R2 Beta Mentor)
>>> » ZackNET Enterprises: www.zacknet.co.uk
>>> » MSBlog on ResDev: http://msblog.resdev.net
>>> » ZackNET Forum: www.zacknet.co.uk/forum
>>> » VistaBase: www.zacknet.co.uk/vistabase
>>> » This mailing is provided "as is" with no warranties, and confers no
>>> rights. All opinions expressed are those of myself unless stated so, and
>>> not
>>> of my employer, best friend, mother or cat. Let's be clear on that one!
>>>
>>>
>>> --- Original message follows ---
>>> "blahblahblahh" <m.meledandri@gamil.com> wrote in message
>>> news:uY7cwxnQGHA.2300@TK2MSFTNGP11.phx.gbl...
>>>>I have formatted the drive (IDE) with XPSP2 because I know RAW isn't
>>>>supported, yet I still get the error:
>>>> an internal error occurred while displaying the image selection wizard
>>>> Got 5308 working in VMWare, but not on actual computer. Thought it
>>>> would be the other way around. Any help would be much appreciated.
>>>> All the web forums suggested newgroups for answer, yet I don't see this
>>>> issue listed. Thanks
>>>>
>>>>
>>>
>>>
>>
>>
>
>