Canon pixma mp750, how to print on 'all' of cd/dvd?

Hello, I can't find a way to reduce the 'inner circle' during print to
cd/dvds? You can reduce the circle a little, but not all the way down
to the size of the inner hole (for full face printing). It leaves my
discs with fairly large white or 'unprinted' areas.
I am told there must be a way, but...?
Thanks for any help & A very happy New Year to everyone!
Allen

On Sun, 31 Dec 2006 wrote:

>Hello, I can't find a way to reduce the 'inner circle' during print to
>cd/dvds? You can reduce the circle a little, but not all the way down
>to the size of the inner hole (for full face printing). It leaves my
>discs with fairly large white or 'unprinted' areas.
>I am told there must be a way, but...?
>Thanks for any help & A very happy New Year to everyone!

As I said in reply to a similar request earlier this year about one of
the Pixma printers (I assume the same applies to the MP750):

That's easily done. Go to Paper Selection/CD Label Print and click on
New. You can set the inner diameter to any value down to 17mm. But
take care to stay well within the printable area, else you could spray
ink all over the inside of the drive when you play the disc.
--
Thoss

On Sun, 31 Dec 2006 21:20:59 +0000, thoss <usenet@thoss.plus.com>
wrote:

>That's easily done. Go to Paper Selection/CD Label Print and click on
>New. You can set the inner diameter to any value down to 17mm. But
>take care to stay well within the printable area, else you could spray
>ink all over the inside of the drive when you play the disc.
Hey, that's great!...thanks for your swift & helpful reply!
Allen

Taiyo Yuden hub printable is 23mm x 118mm

Verbatim hub printable is 21mm x 119-120mm, but the Canon driver will not
allow more than 118mm.


<cu@thebar.com> wrote in message
news:canip2d4cedphrhf0op2ct5vbamu5577gh@4ax.com...
> On Sun, 31 Dec 2006 21:20:59 +0000, thoss <usenet@thoss.plus.com>
> wrote:
>
> >That's easily done. Go to Paper Selection/CD Label Print and click on
> >New. You can set the inner diameter to any value down to 17mm. But
> >take care to stay well within the printable area, else you could spray
> >ink all over the inside of the drive when you play the disc.
> Hey, that's great!...thanks for your swift & helpful reply!
> Allen

Nero Cover Designer will print 119mm and a few other software as well.

On Jan 1, 5:37 pm, "Dan G" <n...@12345.org> wrote:
> Taiyo Yuden hub printable is 23mm x 118mm
>
> Verbatim hub printable is 21mm x 119-120mm, but the Canon driver will not
> allow more than 118mm.
>
> <c...@thebar.com> wrote in messagenews:canip2d4cedphrhf0op2ct5vbamu5577gh@4ax.com...
>
> > On Sun, 31 Dec 2006 21:20:59 +0000, thoss <use...@thoss.plus.com>
> > wrote:
>
> > >That's easily done. Go to Paper Selection/CD Label Print and click on
> > >New. You can set the inner diameter to any value down to 17mm. But
> > >take care to stay well within the printable area, else you could spray
> > >ink all over the inside of the drive when you play the disc.
> > Hey, that's great!...thanks for your swift & helpful reply!
> > Allen

On 12 Jan 2007 07:54:06 -0800, "KnightCrawler@gmail.com"
<KnightCrawler@gmail.com> wrote:

>Nero Cover Designer will print 119mm and a few other software as well.
Thank you for this helpful information Knightcrawler.
Allen