Static IP

I have made a XPE image working, but i need to use static IP. My
network adapter is a Intel Pro/100 M Desktop Adapter.
I have imported the .sld from xpefiles and the hardware is reconized,
but i can't use static ip, any ideia how to resolve it?

Thanks in advance Pedro

XPe doesn't have setting for static TCP/IP in Target Deisgner. There is a
solution to the static TCP/IP are xpefiles.com that sets the address during
FBA.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


<pedro.ancient@gmail.com> wrote in message
news:1171359102.008379.227740@k78g2000cwa.googlegroups.com...
>I have made a XPE image working, but i need to use static IP. My
> network adapter is a Intel Pro/100 M Desktop Adapter.
> I have imported the .sld from xpefiles and the hardware is reconized,
> but i can't use static ip, any ideia how to resolve it?
>
> Thanks in advance Pedro
>

Where? i can't find it.

On Feb 14, 12:57 am, "Sean Liming \(eMVP\)" <sean_lim...@sjjmicro.com>
wrote:
> XPe doesn't have setting for static TCP/IP in Target Deisgner. There is a
> solution to the static TCP/IP are xpefiles.com that sets the address during
> FBA.
>
> Regards,
>
> Sean Limingwww.sjjmicro.com/www.seanliming.com
> XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
> Toolkit
>
> <pedro.anci...@gmail.com> wrote in message
>
> news:1171359102.008379.227740@k78g2000cwa.googlegroups.com...
>
> >I have made a XPE image working, but i need to use static IP. My
> > network adapter is a Intel Pro/100 M Desktop Adapter.
> > I have imported the .sld from xpefiles and the hardware is reconized,
> > but i can't use static ip, any ideia how to resolve it?
>
> > Thanks in advance Pedro

It is called Netsetup. It is on the second page for Software.


Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit


<pedro.ancient@gmail.com> wrote in message
news:1171444256.477050.54960@l53g2000cwa.googlegroups.com...
> Where? i can't find it.
>
> On Feb 14, 12:57 am, "Sean Liming \(eMVP\)" <sean_lim...@sjjmicro.com>
> wrote:
>> XPe doesn't have setting for static TCP/IP in Target Deisgner. There is a
>> solution to the static TCP/IP are xpefiles.com that sets the address
>> during
>> FBA.
>>
>> Regards,
>>
>> Sean Limingwww.sjjmicro.com/www.seanliming.com
>> XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
>> Toolkit
>>
>> <pedro.anci...@gmail.com> wrote in message
>>
>> news:1171359102.008379.227740@k78g2000cwa.googlegroups.com...
>>
>> >I have made a XPE image working, but i need to use static IP. My
>> > network adapter is a Intel Pro/100 M Desktop Adapter.
>> > I have imported the .sld from xpefiles and the hardware is reconized,
>> > but i can't use static ip, any ideia how to resolve it?
>>
>> > Thanks in advance Pedro
>
>

Pedro,

Here is well described how you can use netsh to set static IP on XP embedded image:
http://msdn2.microsoft.com/en-us/library/ms838602.aspx.
It also lists the components you need in configuration to get netsh plug-ins working.

--
=========
Regards,
KM

>I have made a XPE image working, but i need to use static IP. My
> network adapter is a Intel Pro/100 M Desktop Adapter.
> I have imported the .sld from xpefiles and the hardware is reconized,
> but i can't use static ip, any ideia how to resolve it?
>
> Thanks in advance Pedro
>

I have made what is said there, but can't get the static ip
configured. When i do
"netsh interface ip show address" i get "No more data avaiable".

I have no more ideias how to resolve this:S



On Feb 14, 6:40 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
> Pedro,
>
> Here is well described how you can use netsh to set static IP on XP embedded image:http://msdn2.microsoft.com/en-us/library/ms838602.aspx.
> It also lists the components you need in configuration to get netsh plug-ins working.
>
> --
> =========
> Regards,
> KM
>
> >I have made a XPE image working, but i need to use static IP. My
> > network adapter is a Intel Pro/100 M Desktop Adapter.
> > I have imported the .sld from xpefiles and the hardware is reconized,
> > but i can't use static ip, any ideia how to resolve it?
>
> > Thanks in advance Pedro

Hmm.. That is a scary message.

Let me ask you this:
- Did it work with DHCP? Was the device assigned with a dhcp ip?
- If not, is the NIC properly installed and configured on your device?
- Does your image include core network components, such as "Core Networking", "TCP/IP Basic Support", "Client for Microsoft
Networks" (not required to get static IP working but often good to have supported), etc.

--
=========
Regards,
KM

>I have made what is said there, but can't get the static ip
> configured. When i do
> "netsh interface ip show address" i get "No more data avaiable".
>
> I have no more ideias how to resolve this:S
>
>
>
> On Feb 14, 6:40 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
>> Pedro,
>>
>> Here is well described how you can use netsh to set static IP on XP embedded
>> image:http://msdn2.microsoft.com/en-us/library/ms838602.aspx.
>> It also lists the components you need in configuration to get netsh plug-ins working.
>>
>> --
>> =========
>> Regards,
>> KM
>>
>> >I have made a XPE image working, but i need to use static IP. My
>> > network adapter is a Intel Pro/100 M Desktop Adapter.
>> > I have imported the .sld from xpefiles and the hardware is reconized,
>> > but i can't use static ip, any ideia how to resolve it?
>>
>> > Thanks in advance Pedro
>
>

make sure you have

Network Command Shell
Network Command Shell Interface Context
IP Router Monitor Library

and run the following command if you don't have windows explorer
rundll32 netshell.dll HrRenameConnection




<pedro.ancient@gmail.com> wrote in message
news:1171540335.421502.30170@v33g2000cwv.googlegroups.com...
>I have made what is said there, but can't get the static ip
> configured. When i do
> "netsh interface ip show address" i get "No more data avaiable".
>
> I have no more ideias how to resolve this:S
>
>
>
> On Feb 14, 6:40 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
>> Pedro,
>>
>> Here is well described how you can use netsh to set static IP on XP
>> embedded image:http://msdn2.microsoft.com/en-us/library/ms838602.aspx.
>> It also lists the components you need in configuration to get netsh
>> plug-ins working.
>>
>> --
>> =========
>> Regards,
>> KM
>>
>> >I have made a XPE image working, but i need to use static IP. My
>> > network adapter is a Intel Pro/100 M Desktop Adapter.
>> > I have imported the .sld from xpefiles and the hardware is reconized,
>> > but i can't use static ip, any ideia how to resolve it?
>>
>> > Thanks in advance Pedro
>
>