Help Linotype saphir ultra2

Can anyone help me with a linotype saphir ultra2 scanner running on
windows xp , using newcolor 4000 2.0 software, i don't have any
drivers for it, some how it worked once using umax powerlook 1100 but
now i can make it work, when i start the computer i get more than 15
messages found new hardware linotype saphir 4 scsi scanner device and
ask for the drivers
please some want send me drivers for it

ricody@msn.com

THANK YOU!!!!

"ricody" <ricody@msn.com> wrote in message
news:1149208594.263087.263590@y43g2000cwc.googlegroups.com...
> Can anyone help me with a linotype saphir ultra2 scanner running on
> windows xp , using newcolor 4000 2.0 software, i don't have any
> drivers for it, some how it worked once using umax powerlook 1100 but
> now i can make it work, when i start the computer i get more than 15
> messages found new hardware linotype saphir 4 scsi scanner device and
> ask for the drivers
> please some want send me drivers for it
>
> ricody@msn.com
>
> THANK YOU!!!!
>

This web site claims that you need a registry entry for it to work in
Windows XP.
http://members.driverguide.com/driv...?driverid=62707

So if you still have the driver that worked before, maybe this registry
entry will get it ot work again. (Just a guess).

You may have to become a member to download.
--
CSM1
http://www.carlmcmillan.com
--

> >
>
> This web site claims that you need a registry entry for it to work in
> Windows XP.
> http://members.driverguide.com/driv...?driverid=62707
>
> So if you still have the driver that worked before, maybe this registry
> entry will get it ot work again. (Just a guess).
>
> You may have to become a member to download.
> --
> CSM1
> http://www.carlmcmillan.com
>thanks csm1,
i download it ,extracted but it keeps asking for the drivers,don't know
if it went to the right part on the registry --

ricody wrote:
> Can anyone help me with a linotype saphir ultra2 scanner running on
> windows xp , using newcolor 4000 2.0 software, i don't have any
> drivers for it, some how it worked once using umax powerlook 1100 but
> now i can make it work, when i start the computer i get more than 15
> messages found new hardware linotype saphir 4 scsi scanner device and
> ask for the drivers
> please some want send me drivers for it
>
> ricody@msn.com
>
> THANK YOU!!!!

The Saphir 2 is a UMax Powerlook rebadged. Windows XP is just slightly
better than Mac OS10 in handling old SCSI devices (OS 10 just won't run
them). I get the same messages on my Nikon LS2000, I just cancel the
message and the scanner works from Twain in Photoshop CS. If you have
installed the drivers try ignoring it. Also with the Nikon I had to
install a version of the Adaptec ASPI driver, available on the Adaptec
site with instructions. That age scanner has SCSI specific card
requirements, generally just Adaptec cards. Linotype will probably
charge for their software, so if it runs on the UMax software that is
good, just not the best driver.

Good luck
Tom

thank you tom,
i try to cancel the message but it keeps comming out (more than 15
times) found new hardware linotype saphir4 scsi scanner device, i'm
downloading magic scan 4.5, everybody tells me it should work, will let
you know
thanks again
ricody