Effects gone

I have Windows Movie Makers 2.1, and I have had it for a long time without
any problems.

Recently I opened it and all my effects and transitions were gone except for
'Speed-up Double' and 'Slow-down half'

I think what might have caused the problem is Windows Media Player 11 Beta,
or Internet Explorer 7 Beta 2, both of which I downloaded a little while ago.

I was going to try reinstalling Movie Maker, but I decided I wouldn't,
because I would have to download SP2 again.

I was wondering if anyone else has experienced this problem, and if there is
an easy way of fixing it.

I didn't lose my transitions when I installed either of those Betas.
You could either try reregistering the DLL's (Instructions on my website
WMM -> Trouble Shooting) or
you could use Windows Restore to go to a restore point before installing the
Betas.
--
Wojo
MVP - Windows Digital Media

Wojo's Web: www.wojos-web.co.nr
Also please visit:
www.remember-christopher.dostweb.com/christopher

"Mike" <Mike@discussions.microsoft.com> wrote in message
news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
>I have Windows Movie Makers 2.1, and I have had it for a long time without
> any problems.
>
> Recently I opened it and all my effects and transitions were gone except
> for
> 'Speed-up Double' and 'Slow-down half'
>
> I think what might have caused the problem is Windows Media Player 11
> Beta,
> or Internet Explorer 7 Beta 2, both of which I downloaded a little while
> ago.
>
> I was going to try reinstalling Movie Maker, but I decided I wouldn't,
> because I would have to download SP2 again.
>
> I was wondering if anyone else has experienced this problem, and if there
> is
> an easy way of fixing it.

I followed the steps on your website to reregister the Dll's.
I noticed that there are 3 more Dll's than the ones listed on your website.
They are:
wmmfilt.dll
wmmres.dll
wmmutil.dll

This is the entire contents of C:\Program Files\Movie Maker:

1033 (folder)
MUI (folder)
Shared (folder)
creativity_mmfull.exe
moviemk.exe
OLDB1.tmp
sample.asf
sample.wmv
wmm2ae.dll
wmm2eres.dll *
wmm2ext.dll
wmm2filt.dll
wmm2fxa.dll
wmm2fxb.dll
wmm2res2.dll *
wmm2res.dll *
wmmfilt.dll
wmmres.dll *
wmmutil.dll *


The Dll's with the * beside them did not register properly. When I tried to
register them, is said:

C:/Program Files/Movie Maker/ *.dll was loaded, but the DllRegisterServer
entry point was not found.
This file can not be registered.





"Wojo [MVP]" wrote:

> I didn't lose my transitions when I installed either of those Betas.
> You could either try reregistering the DLL's (Instructions on my website
> WMM -> Trouble Shooting) or
> you could use Windows Restore to go to a restore point before installing the
> Betas.
> --
> Wojo
> MVP - Windows Digital Media
>
> Wojo's Web: www.wojos-web.co.nr
> Also please visit:
> www.remember-christopher.dostweb.com/christopher
>
> "Mike" <Mike@discussions.microsoft.com> wrote in message
> news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
> >I have Windows Movie Makers 2.1, and I have had it for a long time without
> > any problems.
> >
> > Recently I opened it and all my effects and transitions were gone except
> > for
> > 'Speed-up Double' and 'Slow-down half'
> >
> > I think what might have caused the problem is Windows Media Player 11
> > Beta,
> > or Internet Explorer 7 Beta 2, both of which I downloaded a little while
> > ago.
> >
> > I was going to try reinstalling Movie Maker, but I decided I wouldn't,
> > because I would have to download SP2 again.
> >
> > I was wondering if anyone else has experienced this problem, and if there
> > is
> > an easy way of fixing it.
>
>

I have investigated this problem before with mixed success of a solution.

Are you using Vision 6 software from GenevaLogic by any chance? It is known
to cause this issue. There is a fix:
http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118

Another thing that was previously reported to be connected to this was Cisco
VPN software.


Not all DLLs are registerable. So dont worry about those which did not
register.
Also try my batch file to re-register the DLLs.
http://www.rehanfx.org/utils/reregdlls.bat


--
Rehan
www.rehanfx.org




"Mike" <Mike@discussions.microsoft.com> wrote in message
news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
> I followed the steps on your website to reregister the Dll's.
> I noticed that there are 3 more Dll's than the ones listed on your
website.
> They are:
> wmmfilt.dll
> wmmres.dll
> wmmutil.dll
>
> This is the entire contents of C:\Program Files\Movie Maker:
>
> 1033 (folder)
> MUI (folder)
> Shared (folder)
> creativity_mmfull.exe
> moviemk.exe
> OLDB1.tmp
> sample.asf
> sample.wmv
> wmm2ae.dll
> wmm2eres.dll *
> wmm2ext.dll
> wmm2filt.dll
> wmm2fxa.dll
> wmm2fxb.dll
> wmm2res2.dll *
> wmm2res.dll *
> wmmfilt.dll
> wmmres.dll *
> wmmutil.dll *
>
>
> The Dll's with the * beside them did not register properly. When I tried
to
> register them, is said:
>
> C:/Program Files/Movie Maker/ *.dll was loaded, but the DllRegisterServer
> entry point was not found.
> This file can not be registered.
>
>
>
>
>
> "Wojo [MVP]" wrote:
>
> > I didn't lose my transitions when I installed either of those Betas.
> > You could either try reregistering the DLL's (Instructions on my website
> > WMM -> Trouble Shooting) or
> > you could use Windows Restore to go to a restore point before installing
the
> > Betas.
> > --
> > Wojo
> > MVP - Windows Digital Media
> >
> > Wojo's Web: www.wojos-web.co.nr
> > Also please visit:
> > www.remember-christopher.dostweb.com/christopher
> >
> > "Mike" <Mike@discussions.microsoft.com> wrote in message
> > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
> > >I have Windows Movie Makers 2.1, and I have had it for a long time
without
> > > any problems.
> > >
> > > Recently I opened it and all my effects and transitions were gone
except
> > > for
> > > 'Speed-up Double' and 'Slow-down half'
> > >
> > > I think what might have caused the problem is Windows Media Player 11
> > > Beta,
> > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
while
> > > ago.
> > >
> > > I was going to try reinstalling Movie Maker, but I decided I wouldn't,
> > > because I would have to download SP2 again.
> > >
> > > I was wondering if anyone else has experienced this problem, and if
there
> > > is
> > > an easy way of fixing it.
> >
> >

I don't have Vision 6 or Cisco VPN software.
I tried running the batch file, but that didn't solve the problem.
Is there a file somewhere where all the effects and transitions are kept?


"rehan" wrote:

> I have investigated this problem before with mixed success of a solution.
>
> Are you using Vision 6 software from GenevaLogic by any chance? It is known
> to cause this issue. There is a fix:
> http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118
>
> Another thing that was previously reported to be connected to this was Cisco
> VPN software.
>
>
> Not all DLLs are registerable. So dont worry about those which did not
> register.
> Also try my batch file to re-register the DLLs.
> http://www.rehanfx.org/utils/reregdlls.bat
>
>
> --
> Rehan
> www.rehanfx.org
>
>
>
>
> "Mike" <Mike@discussions.microsoft.com> wrote in message
> news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
> > I followed the steps on your website to reregister the Dll's.
> > I noticed that there are 3 more Dll's than the ones listed on your
> website.
> > They are:
> > wmmfilt.dll
> > wmmres.dll
> > wmmutil.dll
> >
> > This is the entire contents of C:\Program Files\Movie Maker:
> >
> > 1033 (folder)
> > MUI (folder)
> > Shared (folder)
> > creativity_mmfull.exe
> > moviemk.exe
> > OLDB1.tmp
> > sample.asf
> > sample.wmv
> > wmm2ae.dll
> > wmm2eres.dll *
> > wmm2ext.dll
> > wmm2filt.dll
> > wmm2fxa.dll
> > wmm2fxb.dll
> > wmm2res2.dll *
> > wmm2res.dll *
> > wmmfilt.dll
> > wmmres.dll *
> > wmmutil.dll *
> >
> >
> > The Dll's with the * beside them did not register properly. When I tried
> to
> > register them, is said:
> >
> > C:/Program Files/Movie Maker/ *.dll was loaded, but the DllRegisterServer
> > entry point was not found.
> > This file can not be registered.
> >
> >
> >
> >
> >
> > "Wojo [MVP]" wrote:
> >
> > > I didn't lose my transitions when I installed either of those Betas.
> > > You could either try reregistering the DLL's (Instructions on my website
> > > WMM -> Trouble Shooting) or
> > > you could use Windows Restore to go to a restore point before installing
> the
> > > Betas.
> > > --
> > > Wojo
> > > MVP - Windows Digital Media
> > >
> > > Wojo's Web: www.wojos-web.co.nr
> > > Also please visit:
> > > www.remember-christopher.dostweb.com/christopher
> > >
> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
> > > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
> > > >I have Windows Movie Makers 2.1, and I have had it for a long time
> without
> > > > any problems.
> > > >
> > > > Recently I opened it and all my effects and transitions were gone
> except
> > > > for
> > > > 'Speed-up Double' and 'Slow-down half'
> > > >
> > > > I think what might have caused the problem is Windows Media Player 11
> > > > Beta,
> > > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
> while
> > > > ago.
> > > >
> > > > I was going to try reinstalling Movie Maker, but I decided I wouldn't,
> > > > because I would have to download SP2 again.
> > > >
> > > > I was wondering if anyone else has experienced this problem, and if
> there
> > > > is
> > > > an easy way of fixing it.
> > >
> > >
>
>
>

These are implemented in the DLLs found in Movie maker folder.

The only thing that remains to be tried from my list of recommended
solutions is to re-install SP2. If you try it please let us know the result.


--
Rehan
MS MVP -- Digital Media
www.rehanfx.org - get transitions and effects for Windows Movie Maker



"Mike" <Mike@discussions.microsoft.com> wrote in message
news:896E1612-CB29-4995-8744-9E429B85DFE3@microsoft.com...
>I don't have Vision 6 or Cisco VPN software.
> I tried running the batch file, but that didn't solve the problem.
> Is there a file somewhere where all the effects and transitions are kept?
>
>
> "rehan" wrote:
>
>> I have investigated this problem before with mixed success of a solution.
>>
>> Are you using Vision 6 software from GenevaLogic by any chance? It is
>> known
>> to cause this issue. There is a fix:
>> http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118
>>
>> Another thing that was previously reported to be connected to this was
>> Cisco
>> VPN software.
>>
>>
>> Not all DLLs are registerable. So dont worry about those which did not
>> register.
>> Also try my batch file to re-register the DLLs.
>> http://www.rehanfx.org/utils/reregdlls.bat
>>
>>
>> --
>> Rehan
>> www.rehanfx.org
>>
>>
>>
>>
>> "Mike" <Mike@discussions.microsoft.com> wrote in message
>> news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
>> > I followed the steps on your website to reregister the Dll's.
>> > I noticed that there are 3 more Dll's than the ones listed on your
>> website.
>> > They are:
>> > wmmfilt.dll
>> > wmmres.dll
>> > wmmutil.dll
>> >
>> > This is the entire contents of C:\Program Files\Movie Maker:
>> >
>> > 1033 (folder)
>> > MUI (folder)
>> > Shared (folder)
>> > creativity_mmfull.exe
>> > moviemk.exe
>> > OLDB1.tmp
>> > sample.asf
>> > sample.wmv
>> > wmm2ae.dll
>> > wmm2eres.dll *
>> > wmm2ext.dll
>> > wmm2filt.dll
>> > wmm2fxa.dll
>> > wmm2fxb.dll
>> > wmm2res2.dll *
>> > wmm2res.dll *
>> > wmmfilt.dll
>> > wmmres.dll *
>> > wmmutil.dll *
>> >
>> >
>> > The Dll's with the * beside them did not register properly. When I
>> > tried
>> to
>> > register them, is said:
>> >
>> > C:/Program Files/Movie Maker/ *.dll was loaded, but the
>> > DllRegisterServer
>> > entry point was not found.
>> > This file can not be registered.
>> >
>> >
>> >
>> >
>> >
>> > "Wojo [MVP]" wrote:
>> >
>> > > I didn't lose my transitions when I installed either of those Betas.
>> > > You could either try reregistering the DLL's (Instructions on my
>> > > website
>> > > WMM -> Trouble Shooting) or
>> > > you could use Windows Restore to go to a restore point before
>> > > installing
>> the
>> > > Betas.
>> > > --
>> > > Wojo
>> > > MVP - Windows Digital Media
>> > >
>> > > Wojo's Web: www.wojos-web.co.nr
>> > > Also please visit:
>> > > www.remember-christopher.dostweb.com/christopher
>> > >
>> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
>> > > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
>> > > >I have Windows Movie Makers 2.1, and I have had it for a long time
>> without
>> > > > any problems.
>> > > >
>> > > > Recently I opened it and all my effects and transitions were gone
>> except
>> > > > for
>> > > > 'Speed-up Double' and 'Slow-down half'
>> > > >
>> > > > I think what might have caused the problem is Windows Media Player
>> > > > 11
>> > > > Beta,
>> > > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
>> while
>> > > > ago.
>> > > >
>> > > > I was going to try reinstalling Movie Maker, but I decided I
>> > > > wouldn't,
>> > > > because I would have to download SP2 again.
>> > > >
>> > > > I was wondering if anyone else has experienced this problem, and if
>> there
>> > > > is
>> > > > an easy way of fixing it.
>> > >
>> > >
>>
>>
>>

Or try copying the DLL's from your i386 directory overwriting the ones
currently in the /Movie Maker folder.
The reason BTW that the other 3 DLL's are not listed is because they don't
get registered.
-Wojo

"Rehan" <someone@somewhere.com> wrote in message
news:OICC1h6nGHA.1244@TK2MSFTNGP05.phx.gbl...
> These are implemented in the DLLs found in Movie maker folder.
>
> The only thing that remains to be tried from my list of recommended
> solutions is to re-install SP2. If you try it please let us know the
> result.
>
>
> --
> Rehan
> MS MVP -- Digital Media
> www.rehanfx.org - get transitions and effects for Windows Movie Maker
>
>
>
> "Mike" <Mike@discussions.microsoft.com> wrote in message
> news:896E1612-CB29-4995-8744-9E429B85DFE3@microsoft.com...
>>I don't have Vision 6 or Cisco VPN software.
>> I tried running the batch file, but that didn't solve the problem.
>> Is there a file somewhere where all the effects and transitions are kept?
>>
>>
>> "rehan" wrote:
>>
>>> I have investigated this problem before with mixed success of a
>>> solution.
>>>
>>> Are you using Vision 6 software from GenevaLogic by any chance? It is
>>> known
>>> to cause this issue. There is a fix:
>>> http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118
>>>
>>> Another thing that was previously reported to be connected to this was
>>> Cisco
>>> VPN software.
>>>
>>>
>>> Not all DLLs are registerable. So dont worry about those which did not
>>> register.
>>> Also try my batch file to re-register the DLLs.
>>> http://www.rehanfx.org/utils/reregdlls.bat
>>>
>>>
>>> --
>>> Rehan
>>> www.rehanfx.org
>>>
>>>
>>>
>>>
>>> "Mike" <Mike@discussions.microsoft.com> wrote in message
>>> news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
>>> > I followed the steps on your website to reregister the Dll's.
>>> > I noticed that there are 3 more Dll's than the ones listed on your
>>> website.
>>> > They are:
>>> > wmmfilt.dll
>>> > wmmres.dll
>>> > wmmutil.dll
>>> >
>>> > This is the entire contents of C:\Program Files\Movie Maker:
>>> >
>>> > 1033 (folder)
>>> > MUI (folder)
>>> > Shared (folder)
>>> > creativity_mmfull.exe
>>> > moviemk.exe
>>> > OLDB1.tmp
>>> > sample.asf
>>> > sample.wmv
>>> > wmm2ae.dll
>>> > wmm2eres.dll *
>>> > wmm2ext.dll
>>> > wmm2filt.dll
>>> > wmm2fxa.dll
>>> > wmm2fxb.dll
>>> > wmm2res2.dll *
>>> > wmm2res.dll *
>>> > wmmfilt.dll
>>> > wmmres.dll *
>>> > wmmutil.dll *
>>> >
>>> >
>>> > The Dll's with the * beside them did not register properly. When I
>>> > tried
>>> to
>>> > register them, is said:
>>> >
>>> > C:/Program Files/Movie Maker/ *.dll was loaded, but the
>>> > DllRegisterServer
>>> > entry point was not found.
>>> > This file can not be registered.
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > "Wojo [MVP]" wrote:
>>> >
>>> > > I didn't lose my transitions when I installed either of those Betas.
>>> > > You could either try reregistering the DLL's (Instructions on my
>>> > > website
>>> > > WMM -> Trouble Shooting) or
>>> > > you could use Windows Restore to go to a restore point before
>>> > > installing
>>> the
>>> > > Betas.
>>> > > --
>>> > > Wojo
>>> > > MVP - Windows Digital Media
>>> > >
>>> > > Wojo's Web: www.wojos-web.co.nr
>>> > > Also please visit:
>>> > > www.remember-christopher.dostweb.com/christopher
>>> > >
>>> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
>>> > > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
>>> > > >I have Windows Movie Makers 2.1, and I have had it for a long time
>>> without
>>> > > > any problems.
>>> > > >
>>> > > > Recently I opened it and all my effects and transitions were gone
>>> except
>>> > > > for
>>> > > > 'Speed-up Double' and 'Slow-down half'
>>> > > >
>>> > > > I think what might have caused the problem is Windows Media Player
>>> > > > 11
>>> > > > Beta,
>>> > > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
>>> while
>>> > > > ago.
>>> > > >
>>> > > > I was going to try reinstalling Movie Maker, but I decided I
>>> > > > wouldn't,
>>> > > > because I would have to download SP2 again.
>>> > > >
>>> > > > I was wondering if anyone else has experienced this problem, and
>>> > > > if
>>> there
>>> > > > is
>>> > > > an easy way of fixing it.
>>> > >
>>> > >
>>>
>>>
>>>
>
>

I have still been trying to work out this problem. So far what I have found
is, 2 registry files that contain all of the effects and transitions:

HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{CC7BFB42-F175-11D1-A392-00E0291F3959}

HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{CC7BFB43-F175-11D1-A392-00E0291F3959}

I noticed that when I open Windows Movie Maker, it deletes all of the
registry files in these folders, deleting all of the effects, except for
speed up and slow down.

I have come across a registry fix that replaces these missing files, however
they are still deleted when Movie Maker is opened.

I tried searching for the registry files to see if anyone else has had
spyware or virus problems or something with these files, but I didn't find
any. What I did find though is that they have something to do with qedit.dll
, which is found in the c:\WINDOWS\system32 folder.

I tried renaming this dll to see how Movie Maker would work without it, but
I didn't notice any difference. When I went to rename the dll back to
qedit.dll, it told me that there was already a file named that. It seems that
the dll was replaced as soon as I renamed it. This could be the dll that I am
having problems with. I still need to find out exactly what is deleting the
registry files.

If anyone could help at all, that would be very much appreciated.
Thanks, Mike



"Wojo [MVP]" wrote:

> Or try copying the DLL's from your i386 directory overwriting the ones
> currently in the /Movie Maker folder.
> The reason BTW that the other 3 DLL's are not listed is because they don't
> get registered.
> -Wojo
>
> "Rehan" <someone@somewhere.com> wrote in message
> news:OICC1h6nGHA.1244@TK2MSFTNGP05.phx.gbl...
> > These are implemented in the DLLs found in Movie maker folder.
> >
> > The only thing that remains to be tried from my list of recommended
> > solutions is to re-install SP2. If you try it please let us know the
> > result.
> >
> >
> > --
> > Rehan
> > MS MVP -- Digital Media
> > www.rehanfx.org - get transitions and effects for Windows Movie Maker
> >
> >
> >
> > "Mike" <Mike@discussions.microsoft.com> wrote in message
> > news:896E1612-CB29-4995-8744-9E429B85DFE3@microsoft.com...
> >>I don't have Vision 6 or Cisco VPN software.
> >> I tried running the batch file, but that didn't solve the problem.
> >> Is there a file somewhere where all the effects and transitions are kept?
> >>
> >>
> >> "rehan" wrote:
> >>
> >>> I have investigated this problem before with mixed success of a
> >>> solution.
> >>>
> >>> Are you using Vision 6 software from GenevaLogic by any chance? It is
> >>> known
> >>> to cause this issue. There is a fix:
> >>> http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118
> >>>
> >>> Another thing that was previously reported to be connected to this was
> >>> Cisco
> >>> VPN software.
> >>>
> >>>
> >>> Not all DLLs are registerable. So dont worry about those which did not
> >>> register.
> >>> Also try my batch file to re-register the DLLs.
> >>> http://www.rehanfx.org/utils/reregdlls.bat
> >>>
> >>>
> >>> --
> >>> Rehan
> >>> www.rehanfx.org
> >>>
> >>>
> >>>
> >>>
> >>> "Mike" <Mike@discussions.microsoft.com> wrote in message
> >>> news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
> >>> > I followed the steps on your website to reregister the Dll's.
> >>> > I noticed that there are 3 more Dll's than the ones listed on your
> >>> website.
> >>> > They are:
> >>> > wmmfilt.dll
> >>> > wmmres.dll
> >>> > wmmutil.dll
> >>> >
> >>> > This is the entire contents of C:\Program Files\Movie Maker:
> >>> >
> >>> > 1033 (folder)
> >>> > MUI (folder)
> >>> > Shared (folder)
> >>> > creativity_mmfull.exe
> >>> > moviemk.exe
> >>> > OLDB1.tmp
> >>> > sample.asf
> >>> > sample.wmv
> >>> > wmm2ae.dll
> >>> > wmm2eres.dll *
> >>> > wmm2ext.dll
> >>> > wmm2filt.dll
> >>> > wmm2fxa.dll
> >>> > wmm2fxb.dll
> >>> > wmm2res2.dll *
> >>> > wmm2res.dll *
> >>> > wmmfilt.dll
> >>> > wmmres.dll *
> >>> > wmmutil.dll *
> >>> >
> >>> >
> >>> > The Dll's with the * beside them did not register properly. When I
> >>> > tried
> >>> to
> >>> > register them, is said:
> >>> >
> >>> > C:/Program Files/Movie Maker/ *.dll was loaded, but the
> >>> > DllRegisterServer
> >>> > entry point was not found.
> >>> > This file can not be registered.
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > "Wojo [MVP]" wrote:
> >>> >
> >>> > > I didn't lose my transitions when I installed either of those Betas.
> >>> > > You could either try reregistering the DLL's (Instructions on my
> >>> > > website
> >>> > > WMM -> Trouble Shooting) or
> >>> > > you could use Windows Restore to go to a restore point before
> >>> > > installing
> >>> the
> >>> > > Betas.
> >>> > > --
> >>> > > Wojo
> >>> > > MVP - Windows Digital Media
> >>> > >
> >>> > > Wojo's Web: www.wojos-web.co.nr
> >>> > > Also please visit:
> >>> > > www.remember-christopher.dostweb.com/christopher
> >>> > >
> >>> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
> >>> > > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
> >>> > > >I have Windows Movie Makers 2.1, and I have had it for a long time
> >>> without
> >>> > > > any problems.
> >>> > > >
> >>> > > > Recently I opened it and all my effects and transitions were gone
> >>> except
> >>> > > > for
> >>> > > > 'Speed-up Double' and 'Slow-down half'
> >>> > > >
> >>> > > > I think what might have caused the problem is Windows Media Player
> >>> > > > 11
> >>> > > > Beta,
> >>> > > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
> >>> while
> >>> > > > ago.
> >>> > > >
> >>> > > > I was going to try reinstalling Movie Maker, but I decided I
> >>> > > > wouldn't,
> >>> > > > because I would have to download SP2 again.
> >>> > > >
> >>> > > > I was wondering if anyone else has experienced this problem, and
> >>> > > > if
> >>> there
> >>> > > > is
> >>> > > > an easy way of fixing it.
> >>> > >
> >>> > >
> >>>
> >>>
> >>>
> >
> >
>
>

I have just made another important discovery. I tried replacing the registry
files that are deleted by Movie Maker, then I unregistered qedit.dll. I then
opened Movie Maker and all of my effects and transitions were back! But... I
tried putting a clip onto the timeline and adding an effect to it, which
seemed to work but Movie Maker wouldn't play any video. So I saved the clip
with the effect, closed Movie Maker, then registered qedit.dll. I opened
Movie Maker up again and opened the clip that I had just saved. I was able to
pay the clip and the effect did work, but I couldn't add more effects once
again.

Until I can figue out how to get qedit.dll to stop erasing the effect files,
I will have to unregister the dll and replace the registry files to add
effects to my clips.
If anybody knows how I can fix this problem from here, could you please help
me out? Thanks,
Mike
"Mike" wrote:

> I have still been trying to work out this problem. So far what I have found
> is, 2 registry files that contain all of the effects and transitions:
>
> HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{CC7BFB42-F175-11D1-A392-00E0291F3959}
>
> HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{CC7BFB43-F175-11D1-A392-00E0291F3959}
>
> I noticed that when I open Windows Movie Maker, it deletes all of the
> registry files in these folders, deleting all of the effects, except for
> speed up and slow down.
>
> I have come across a registry fix that replaces these missing files, however
> they are still deleted when Movie Maker is opened.
>
> I tried searching for the registry files to see if anyone else has had
> spyware or virus problems or something with these files, but I didn't find
> any. What I did find though is that they have something to do with qedit.dll
> , which is found in the c:\WINDOWS\system32 folder.
>
> I tried renaming this dll to see how Movie Maker would work without it, but
> I didn't notice any difference. When I went to rename the dll back to
> qedit.dll, it told me that there was already a file named that. It seems that
> the dll was replaced as soon as I renamed it. This could be the dll that I am
> having problems with. I still need to find out exactly what is deleting the
> registry files.
>
> If anyone could help at all, that would be very much appreciated.
> Thanks, Mike
>
>
>
> "Wojo [MVP]" wrote:
>
> > Or try copying the DLL's from your i386 directory overwriting the ones
> > currently in the /Movie Maker folder.
> > The reason BTW that the other 3 DLL's are not listed is because they don't
> > get registered.
> > -Wojo
> >
> > "Rehan" <someone@somewhere.com> wrote in message
> > news:OICC1h6nGHA.1244@TK2MSFTNGP05.phx.gbl...
> > > These are implemented in the DLLs found in Movie maker folder.
> > >
> > > The only thing that remains to be tried from my list of recommended
> > > solutions is to re-install SP2. If you try it please let us know the
> > > result.
> > >
> > >
> > > --
> > > Rehan
> > > MS MVP -- Digital Media
> > > www.rehanfx.org - get transitions and effects for Windows Movie Maker
> > >
> > >
> > >
> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
> > > news:896E1612-CB29-4995-8744-9E429B85DFE3@microsoft.com...
> > >>I don't have Vision 6 or Cisco VPN software.
> > >> I tried running the batch file, but that didn't solve the problem.
> > >> Is there a file somewhere where all the effects and transitions are kept?
> > >>
> > >>
> > >> "rehan" wrote:
> > >>
> > >>> I have investigated this problem before with mixed success of a
> > >>> solution.
> > >>>
> > >>> Are you using Vision 6 software from GenevaLogic by any chance? It is
> > >>> known
> > >>> to cause this issue. There is a fix:
> > >>> http://www.genevalogic.com/phpmyfaq...el&cat=1&id=118
> > >>>
> > >>> Another thing that was previously reported to be connected to this was
> > >>> Cisco
> > >>> VPN software.
> > >>>
> > >>>
> > >>> Not all DLLs are registerable. So dont worry about those which did not
> > >>> register.
> > >>> Also try my batch file to re-register the DLLs.
> > >>> http://www.rehanfx.org/utils/reregdlls.bat
> > >>>
> > >>>
> > >>> --
> > >>> Rehan
> > >>> www.rehanfx.org
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> "Mike" <Mike@discussions.microsoft.com> wrote in message
> > >>> news:27A4A606-0911-4EE3-BF27-A3FFDC9D7EA8@microsoft.com...
> > >>> > I followed the steps on your website to reregister the Dll's.
> > >>> > I noticed that there are 3 more Dll's than the ones listed on your
> > >>> website.
> > >>> > They are:
> > >>> > wmmfilt.dll
> > >>> > wmmres.dll
> > >>> > wmmutil.dll
> > >>> >
> > >>> > This is the entire contents of C:\Program Files\Movie Maker:
> > >>> >
> > >>> > 1033 (folder)
> > >>> > MUI (folder)
> > >>> > Shared (folder)
> > >>> > creativity_mmfull.exe
> > >>> > moviemk.exe
> > >>> > OLDB1.tmp
> > >>> > sample.asf
> > >>> > sample.wmv
> > >>> > wmm2ae.dll
> > >>> > wmm2eres.dll *
> > >>> > wmm2ext.dll
> > >>> > wmm2filt.dll
> > >>> > wmm2fxa.dll
> > >>> > wmm2fxb.dll
> > >>> > wmm2res2.dll *
> > >>> > wmm2res.dll *
> > >>> > wmmfilt.dll
> > >>> > wmmres.dll *
> > >>> > wmmutil.dll *
> > >>> >
> > >>> >
> > >>> > The Dll's with the * beside them did not register properly. When I
> > >>> > tried
> > >>> to
> > >>> > register them, is said:
> > >>> >
> > >>> > C:/Program Files/Movie Maker/ *.dll was loaded, but the
> > >>> > DllRegisterServer
> > >>> > entry point was not found.
> > >>> > This file can not be registered.
> > >>> >
> > >>> >
> > >>> >
> > >>> >
> > >>> >
> > >>> > "Wojo [MVP]" wrote:
> > >>> >
> > >>> > > I didn't lose my transitions when I installed either of those Betas.
> > >>> > > You could either try reregistering the DLL's (Instructions on my
> > >>> > > website
> > >>> > > WMM -> Trouble Shooting) or
> > >>> > > you could use Windows Restore to go to a restore point before
> > >>> > > installing
> > >>> the
> > >>> > > Betas.
> > >>> > > --
> > >>> > > Wojo
> > >>> > > MVP - Windows Digital Media
> > >>> > >
> > >>> > > Wojo's Web: www.wojos-web.co.nr
> > >>> > > Also please visit:
> > >>> > > www.remember-christopher.dostweb.com/christopher
> > >>> > >
> > >>> > > "Mike" <Mike@discussions.microsoft.com> wrote in message
> > >>> > > news:7EC03DB1-68FF-469D-96C7-DCED53FCA3B1@microsoft.com...
> > >>> > > >I have Windows Movie Makers 2.1, and I have had it for a long time
> > >>> without
> > >>> > > > any problems.
> > >>> > > >
> > >>> > > > Recently I opened it and all my effects and transitions were gone
> > >>> except
> > >>> > > > for
> > >>> > > > 'Speed-up Double' and 'Slow-down half'
> > >>> > > >
> > >>> > > > I think what might have caused the problem is Windows Media Player
> > >>> > > > 11
> > >>> > > > Beta,
> > >>> > > > or Internet Explorer 7 Beta 2, both of which I downloaded a little
> > >>> while
> > >>> > > > ago.
> > >>> > > >
> > >>> > > > I was going to try reinstalling Movie Maker, but I decided I
> > >>> > > > wouldn't,
> > >>> > > > because I would have to download SP2 again.
> > >>> > > >
> > >>> > > > I was wondering if anyone else has experienced this problem, and
> > >>> > > > if
> > >>> there
> > >>> > > > is
> > >>> > > > an easy way of fixing it.
> > >>> > >
> > >>> > >
> > >>>
> > >>>
> > >>>
> > >
> > >
> >
> >

Mike wrote:
> I have just made another important discovery. I tried
> replacing the registry files that are deleted by Movie
> Maker, then I unregistered qedit.dll. I then opened Movie
> Maker and all of my effects and transitions were back!
> But... I tried putting a clip onto the timeline and
> adding an effect to it, which seemed to work but Movie
> Maker wouldn't play any video. So I saved the clip with
> the effect, closed Movie Maker, then registered
> qedit.dll. I opened Movie Maker up again and opened the
> clip that I had just saved. I was able to pay the clip
> and the effect did work, but I couldn't add more effects
> once again.
>
> Until I can figue out how to get qedit.dll to stop
> erasing the effect files, I will have to unregister the
> dll and replace the registry files to add effects to my
> clips.
> If anybody knows how I can fix this problem from here,
> could you please help me out? Thanks,
> Mike
==============================
Have you seen the following links:

Movie Maker 2 Software Modules
http://www.papajohn.org/MM2-Modules.html

Movie Maker always has to close
http://tinyurl.com/fw76b

--

*********Notice***********
This is not tech support
........I am a volunteer.......

Solutions that work for
me may not work for you.

Proceed at your own risk.

John Inzer
Picture It! MVP

Digital Image
Highlights and FAQs
http://tinyurl.com/aczzp

Need a Web Host?
*******Consider********
Annex Technologies
http://www.annex.com/
**************************