Remote Boot Set Download for Windows 2003 Server ??

Where is this??
When I try to run the version on CD2 I get a message similar to (as in the
Release notes):
"The Remote Boot Setup Wizard cannot be installed on pre-release versions of
Microsoft Windows .NET Server 2003. After Windows .NET Server 2003 is
released, you can download the updated Remote Boot Setup Wizard from the
Microsoft Web site"

Tried to install on Virtual Machines for Win 2003 SP1 and Win 2003 R2

Couldn't find "Remote Boot Setup Wizrd" on MS site anywhere??

In the meantime I'll have to recreate a Win 2000Svr image.


--
David Jones
Senior Lecturer
School of Electrical & Computer Engineering
RMIT University
+61 3 99255318

I created a Win 2000 Adv Svr VM
- Had to add Active drirectory to be able to use DHCP, also DNS
- Still had to install SP2(Installed SP4)
- The required update of VBScript to V5.5, updated to V5.6
Was able to install Remote Boot Service on this VM


Now when device boots (its a VM too that I had XPE running on),
[Using VMWare for VMs, using custom network]
get an error are DHCP part:
PXE-E55: ProxyDHCP service did not reply to request on port 4011


--
David Jones
Senior Lecturer
School of Electrical & Computer Engineering
RMIT University
+61 3 99255318


"David Jones" wrote:

> Where is this??
> When I try to run the version on CD2 I get a message similar to (as in the
> Release notes):
> "The Remote Boot Setup Wizard cannot be installed on pre-release versions of
> Microsoft Windows .NET Server 2003. After Windows .NET Server 2003 is
> released, you can download the updated Remote Boot Setup Wizard from the
> Microsoft Web site"
>
> Tried to install on Virtual Machines for Win 2003 SP1 and Win 2003 R2
>
> Couldn't find "Remote Boot Setup Wizrd" on MS site anywhere??
>
> In the meantime I'll have to recreate a Win 2000Svr image.
>
>
> --
> David Jones
> Senior Lecturer
> School of Electrical & Computer Engineering
> RMIT University
> +61 3 99255318

I solved the 2nd problem: I had the wrong server IP address.

It booted but got a blue screeen! .Doh!
0x0000007b ( 0xF79F8580,0xc0000034,0x000000002,0x000000000)
ICrease RAM but same problem.
--
David Jones
Senior Lecturer
School of Electrical & Computer Engineering
RMIT University
+61 3 99255318


"David Jones" wrote:

> I created a Win 2000 Adv Svr VM
> - Had to add Active drirectory to be able to use DHCP, also DNS
> - Still had to install SP2(Installed SP4)
> - The required update of VBScript to V5.5, updated to V5.6
> Was able to install Remote Boot Service on this VM
>
>
> Now when device boots (its a VM too that I had XPE running on),
> [Using VMWare for VMs, using custom network]
> get an error are DHCP part:
> PXE-E55: ProxyDHCP service did not reply to request on port 4011
>
>
> --
> David Jones
> Senior Lecturer
> School of Electrical & Computer Engineering
> RMIT University
> +61 3 99255318
>
>
> "David Jones" wrote:
>
> > Where is this??
> > When I try to run the version on CD2 I get a message similar to (as in the
> > Release notes):
> > "The Remote Boot Setup Wizard cannot be installed on pre-release versions of
> > Microsoft Windows .NET Server 2003. After Windows .NET Server 2003 is
> > released, you can download the updated Remote Boot Setup Wizard from the
> > Microsoft Web site"
> >
> > Tried to install on Virtual Machines for Win 2003 SP1 and Win 2003 R2
> >
> > Couldn't find "Remote Boot Setup Wizrd" on MS site anywhere??
> >
> > In the meantime I'll have to recreate a Win 2000Svr image.
> >
> >
> > --
> > David Jones
> > Senior Lecturer
> > School of Electrical & Computer Engineering
> > RMIT University
> > +61 3 99255318

Its on the 3rd disk (XPE).
It occurred to me that that CD has the updates so should be there, and is.
Doh!
--
David Jones
Senior Lecturer
School of Electrical & Computer Engineering
RMIT University
+61 3 99255318


"David Jones" wrote:

> Where is this??
> When I try to run the version on CD2 I get a message similar to (as in the
> Release notes):
> "The Remote Boot Setup Wizard cannot be installed on pre-release versions of
> Microsoft Windows .NET Server 2003. After Windows .NET Server 2003 is
> released, you can download the updated Remote Boot Setup Wizard from the
> Microsoft Web site"
>
> Tried to install on Virtual Machines for Win 2003 SP1 and Win 2003 R2
>
> Couldn't find "Remote Boot Setup Wizrd" on MS site anywhere??
>
> In the meantime I'll have to recreate a Win 2000Svr image.
>
>
> --
> David Jones
> Senior Lecturer
> School of Electrical & Computer Engineering
> RMIT University
> +61 3 99255318