Xerox Phaser 8200 Problem/ Question about issue after power-failure

I recently bought a Phaser 8200.... it worked great, but yesterday I
experienced a power failure in my neighborhood. After the power came
back on, the printer restarted (through its long start-up process), and
ejected lots of ink into bin-B...... but now, it seems the printer is
in a different state. The power LCD display is dark, and I emptied
*another* bin of ejected ink just 24 hours later. Now, it seems the
printer is going through a VERY long start-up process after each print
session.

What is going on? I am not sure what to do. Any suggestions would be
immensely appreciated.

Best, Dave

In article <1135137764.955170.190670@o13g2000cwo.googlegroups.com>,
therealview@gmail.com wrote:

> I recently bought a Phaser 8200.... it worked great, but yesterday I
> experienced a power failure in my neighborhood. After the power came
> back on, the printer restarted (through its long start-up process), and
> ejected lots of ink into bin-B...... but now, it seems the printer is
> in a different state. The power LCD display is dark, and I emptied
> *another* bin of ejected ink just 24 hours later. Now, it seems the
> printer is going through a VERY long start-up process after each print
> session.
>
> What is going on? I am not sure what to do. Any suggestions would be
> immensely appreciated.
>
> Best, Dave

800-821-2797

In message <1135137764.955170.190670@o13g2000cwo.googlegroups.com>,
therealview@gmail.com writes
>I recently bought a Phaser 8200.... it worked great, but yesterday I
>experienced a power failure in my neighborhood. After the power came
>back on, the printer restarted (through its long start-up process), and
>ejected lots of ink into bin-B...... but now, it seems the printer is
>in a different state. The power LCD display is dark, and I emptied
>*another* bin of ejected ink just 24 hours later. Now, it seems the
>printer is going through a VERY long start-up process after each print
>session.
>
>What is going on? I am not sure what to do. Any suggestions would be
>immensely appreciated.

I'm in the wrong office to look at mine, could it have reset its power
off functions so it puts itself into sleep mode too quickly. I don't
know why the display is blank, that doesn't sound too good.

--
Timothy

Running the "Reset Printer" function corrected these anomalies. I am
not sure what the deal was, but it's back to working like it was.

me@privacy.net wrote:
> In message <1135137764.955170.190670@o13g2000cwo.googlegroups.com>,
> therealview@gmail.com writes
> >I recently bought a Phaser 8200.... it worked great, but yesterday I
> >experienced a power failure in my neighborhood. After the power came
> >back on, the printer restarted (through its long start-up process), and
> >ejected lots of ink into bin-B...... but now, it seems the printer is
> >in a different state. The power LCD display is dark, and I emptied
> >*another* bin of ejected ink just 24 hours later. Now, it seems the
> >printer is going through a VERY long start-up process after each print
> >session.
> >
> >What is going on? I am not sure what to do. Any suggestions would be
> >immensely appreciated.
>
> I'm in the wrong office to look at mine, could it have reset its power
> off functions so it puts itself into sleep mode too quickly. I don't
> know why the display is blank, that doesn't sound too good.
>
> --
> Timothy

(turning off the printer will eject tons of ink)

therealview@gmail.com wrote:
> Running the "Reset Printer" function corrected these anomalies. I am
> not sure what the deal was, but it's back to working like it was.
>
> me@privacy.net wrote:
> > In message <1135137764.955170.190670@o13g2000cwo.googlegroups.com>,
> > therealview@gmail.com writes
> > >I recently bought a Phaser 8200.... it worked great, but yesterday I
> > >experienced a power failure in my neighborhood. After the power came
> > >back on, the printer restarted (through its long start-up process), and
> > >ejected lots of ink into bin-B...... but now, it seems the printer is
> > >in a different state. The power LCD display is dark, and I emptied
> > >*another* bin of ejected ink just 24 hours later. Now, it seems the
> > >printer is going through a VERY long start-up process after each print
> > >session.
> > >
> > >What is going on? I am not sure what to do. Any suggestions would be
> > >immensely appreciated.
> >
> > I'm in the wrong office to look at mine, could it have reset its power
> > off functions so it puts itself into sleep mode too quickly. I don't
> > know why the display is blank, that doesn't sound too good.
> >
> > --
> > Timothy