Main Page 
PC Review
Forums
Newsgroups
Hardware
Printers
Re: Help with old HP-IIp error code 12 please...
Forums
Newsgroups
Hardware
Printers
Re: Help with old HP-IIp error code 12 please...
 |
Re: Help with old HP-IIp error code 12 please... |
|
|
Thread Tools | Rate Thread |
02-02-2005, 03:45 AM
|
#1 |
|
Guest
Posts: n/a
|
Re: Help with old HP-IIp error code 12 please...
Hope this guide can help someone!
Thanks for all your help on these groups http://www.angelfire.com/vi/pueet/H..._IIp/hplaserjet Moe Wodnicki wrote: > This one isn't covered in any book, density control board is bad. > > Laser Service > 1449 Aviation Blvd. > Redondo Beach, CA 90278 > > www.laser-service.com > > > "Phil Bert" <no.mail@my.box.com> wrote in message > news:etba8s0m8klre5ht870u43qjksattecg0i@4ax.com... > > > > The status read-out says: > > > > 12 OPEN > > OR NO EP-L > > > > The manual describes this as: > > > > "This message appears when either the printer is not closed properly, > > the EP-L cartridge is missing, or the cooling fan is not working." > > > > > > But the printer is closed tight, securely and squarely, there is a 2 > > week old cartridge installed that I used last night, and the > > ventilation fa is running fine. > > > > Any ideas? > > > > Thanks! > > > > Bert |
|
|
|
| Thread Tools | |
| Rate This Thread | |
|
|
