Re: P4P800 nightmare! Need help!

In article <%ihJa.39472$111.24368@news04.bloor.is.net.cable.rogers.com>,
joe@net.com says...
> I had a similar problem after changing the bios, turn on the system, then
> unplug the power cord within 5 seconds, let it sit then turn the PC on
> again, you should get an error and the cmos will come up. (My problem was
> caused by turning on turbo mode in the CMOS settings, as my memory didn't
> like turbo!)
>
Yes, I tried that, for 5 sec for 55 sec and whole night.
Read my post please.
--
dV
_________________________________________________
Thanks God, I'm an Atheist!
vujo@hi.hinet.hr ICQ5005092