Re: MyDVD 4 or Ulead VideoStudio 5 not capturing

I have partially solved the problem.

I noticed than when I installed new drivers for ATI AIW Radeon some
memory errors were displayed - "0x771c741a referenced memory at
0x00163950. The memory could not be "read".. So I removed the ATI
software (MM Centre) and drivers. MyDVD 4 and Ulead VS 6.

As recommended I removed the Windows hotfix Q328310 (causes a problem
in InstallShield used by installation software for several
applications

I reinstalled DirectX 9.0a and the ATI drivers with no memory errors.

Now Directx Diagnostic Tool does not show any errors while before the
reinstall it did.
Click Start > Run > dxdiag > OK.

I reinstalled Ulead with no memory errors. Now the capture works fine.
I am yet to figure out the proper setting for what I want to do.

Thank you very much for your suggestion. If I need to reload ATI MM
Centre and MyDVD and encounter the capture problem again I will try
your suggestion and post the results.

Carlos

On Tue, 17 Jun 2003 13:50:11 GMT, erratic <erratic@reply-to.address>
wrote:

>On Tue, 17 Jun 2003 02:02:05 GMT, CarlosWA
><carmin.nnoospam@ca.inter.net> wrote:
>
>> and crashes when I try to capture
>
>That should fix it:
>http://www.rage3d.com/board/showthr...80235&perpage=5


******
delete "nnoospam" for e-mail reply