Re: Problem With Output to TV ... Help Needed!

On Mon, 23 Jun 2003 12:33:17 GMT, Chim Bubba <chimbuba@optonline.net>
wrote:

>Thanks but I can't seem to find it in the overlay settings.

http://www.rage3d.com/board/showthr...readid=33610061
"Theater Mode does not show up on the Overlay tab if you enable "extend
my Windows desktop onto this monitor" for the secondary display."

You could also make your TV the primary display, but I prefer Theater
Mode. http://www.rage3d.com/board/showthr...readid=33603034

On Mon, 23 Jun 2003 15:45:49 GMT, erratic <erratic@reply-to.address>
wrote:

>On Mon, 23 Jun 2003 12:33:17 GMT, Chim Bubba <chimbuba@optonline.net>
>wrote:
>
>>Thanks but I can't seem to find it in the overlay settings.
>
>http://www.rage3d.com/board/showthr...readid=33610061
>"Theater Mode does not show up on the Overlay tab if you enable "extend
>my Windows desktop onto this monitor" for the secondary display."
>
>You could also make your TV the primary display, but I prefer Theater
>Mode. http://www.rage3d.com/board/showthr...readid=33603034

Thanks so very much but I was able to get it activated by upgrading
the driver. I got it off of the microsoft updates site and then
rebooted and there it was. So it was very easy after that. Again
thanks so much for the help!