PC Review Forums Newsgroups Hardware Processors PC Chips M851 - Audio Connectors

Reply

PC Chips M851 - Audio Connectors

 
Thread Tools Rate Thread
Old 23-02-2004, 04:11 PM   #1
David Wright
Guest
 
Posts: n/a
Default PC Chips M851 - Audio Connectors


Hello,

Hope someone can help - even if this is the wrong place to ask - I have a
new M851 mobo from PC Chips, and the audio connectors on it, for the front
panel audio, are as follows:

1 AUD_MIC 2 AUD_GND
3 AUD_MIC_BIAS 4 AUD_VCC
5 AUD_FPOUT_R 6 AUD_RET_R
7 HP_ON 8 KEY
9 AUD_FPOUT_L 10 AUD_RET_L

But some of the cables in my new case do not match these - here are the
cables I have.

A. GND }
B. MIC IN } on one cable
C. RIN }
D. ROUT }

and

E. GND }
F. MIC IN } on the other cable
G. LIN }
H. LOUT }

Can anyone give me a list of what goes where?

So far I guessed these:

5-D
6-C
9-H
10-G

Thanks,
David.


  Reply With Quote
Old 26-02-2004, 12:44 AM   #2
John
Guest
 
Posts: n/a
Default Re: PC Chips M851 - Audio Connectors

"David Wright" <david.wright@open.ac.uk> wrote in message news:<c1dc84$1hu8u9$1@ID-158018.news.uni-berlin.de>...
> Hello,
>
> Hope someone can help - even if this is the wrong place to ask - I have a
> new M851 mobo from PC Chips, and the audio connectors on it, for the front
> panel audio, are as follows:
>
> 1 AUD_MIC 2 AUD_GND
> 3 AUD_MIC_BIAS 4 AUD_VCC
> 5 AUD_FPOUT_R 6 AUD_RET_R
> 7 HP_ON 8 KEY
> 9 AUD_FPOUT_L 10 AUD_RET_L
>
> But some of the cables in my new case do not match these - here are the
> cables I have.
>
> A. GND }
> B. MIC IN } on one cable
> C. RIN }
> D. ROUT }
>
> and
>
> E. GND }
> F. MIC IN } on the other cable
> G. LIN }
> H. LOUT }
>
> Can anyone give me a list of what goes where?
>
> So far I guessed these:


On PC Chips web site you might find contact information for a
regional sales office which may know a bit more about your board.
Recently I called a PC Chips California office regarding an 810DG
board. I spoke with a person who was available and helpful. I was
pleasantly surprised.
  Reply With Quote
Reply



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off