PC Review
Forums
Newsgroups
Hardware
Printers
80g glossy paper
Forums
Newsgroups
Hardware
Printers
80g glossy paper
![]() |
80g glossy paper |
|
|
Thread Tools | Rate Thread |
|
|
#1 |
|
Guest
Posts: n/a
|
Hi
Anyone come across 80g one sided glossy paper I'm in the UK Using an hp 960 A web site would be very helpful too Martin ©¿©¬ |
|
|
|
#2 |
|
Guest
Posts: n/a
|
80 gsm is a bit light but JetTec might be a good start from Satin and Gloss
at 150gsm. As Below... Tony -- Inkylink JetTec UK Quality - Wot others wanna-be Epson 950 C70/80/82 Lighfast pigmented inks. Canon BCI-3 i750 BCI-6 S-820 / S-900 series. www.aah-haa.com "Martin ©¿©¬" <martin@removethismartinmcd.fsnet.co.uk> wrote in message news:0pjspv4nstrvdnsarnt1cgmqeaddrblle3@4ax.com... > Hi > Anyone come across 80g one sided glossy paper > I'm in the UK > Using an hp 960 > A web site would be very helpful too > > Martin > ©¿©¬ > |
|
|
|
#3 |
|
Guest
Posts: n/a
|
On Tue, 28 Oct 2003 11:22:12 +0000, Martin ©¿©¬
<martin@removethismartinmcd.fsnet.co.uk> wrote: >Hi >Anyone come across 80g one sided glossy paper >I'm in the UK >Using an hp 960 >A web site would be very helpful too > >Martin >©¿©¬ Don't know about 80g but I've got some old Epson that could well be. I dug out my old stock to run off some test prints to try to sort out a printing problem. Some days later I was reviewing them all and I noticed a reflection in the sky on a harbour scene, as if I'd taken the pic through a window. I spent some time looking at the original, which had no reflection, and wondering how it could have got there in the printing process. After a few minutes I realised that it was the yellow post-it note with the printing settings showing through, stuck to the back of the print. It was visible even laying on the desk. MJ |
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|

Main Page 

