RAS Connected Unable to find TS Servers

Okay resolved the finding the server issues. Reduced the
modems settings from 57600 to 38000 on the RAS server.
Strange that it just started to do this as it's been
running OK for over a year. The reduction made no
difference in connection speed either.

Next issue, posted in new post "Client locks up at desktop"

Steve


>-----Original Message-----
>Suddenly for no apparent reason (so far) none of our RAS
>connected clients and connect to the TS Server. LAN/WAN
>clients have no trouble. I followed some of the
>suggestions in this forum. Here are some things to note:
>
>*All RAS clients can ping TS server until the moment the
>TS Client attempts to connect, after that no reply.
Pings
>to other servers also lost at this point.
>
>*Unable to Telnet to port 3389 from any client
>(LAN/WAN/RAS).
>
>*Netstat -N shows port 3389 as listening.
>
>*Tsadmin.exe shows no errors.
>
>*Event Logs shows no errors for TS except Unable to
>Install printer errors (not an issue for us).
>
>*RAS installed on a dedicated server, seperate from TS
>server.
>
>*Tested on three different client machines including one
>with a clean install.
>
>*Clients are W2K (SP3)and Servers are W2K (SP3).
>
>
>This issue started some time earlier this week.
>
>Suggestions?
>
>Steve
>.
>