upgrading from win 98 to win 2000

Trying to upgrade the system from Win98 to Win 2000 and in
the middle of the install it just locks - no error message
no anything. Have reformated the drive, reinstalled win
98 and try the upgrade to only lock up again.

Anyone have any clues as to why this is happening? How
can I get around it?

Thanks in advance!

Cheers!

No need to install Win98. To do a clean install, either boot the Windows
2000 CD-Rom or setup disks. The set of four install disks can be created
from your Win2k CD-rom; change to the \bootdisk directory on the cd-rom and
execute makeboot.exe (from dos) or makebt32.exe (from 32 bit) and follow the
prompts.

When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.

During Windows 2000 setup, at some point, will want to confirm the previous
operating system for the upgrade; at that point you'll simply insert the
qualified product install CD for it to verify. Then the install will
proceed.

Check the pc, mb or hardware manufacturer's web site for the latest bios and
or Windows 2000 drivers for your devices.


--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect


"Laurie" wrote:
| Trying to upgrade the system from Win98 to Win 2000 and in
| the middle of the install it just locks - no error message
| no anything. Have reformated the drive, reinstalled win
| 98 and try the upgrade to only lock up again.
|
| Anyone have any clues as to why this is happening? How
| can I get around it?
|
| Thanks in advance!
|
| Cheers!

I am still locking up in the same place when installing
Win 2000 directly. If I format and reinstall Win 98 I
have no trouble whereas Win 2000 it locks with no error
message. Could the Win 2000 disk be bad or??????

Thanks so much for any assistance you may be able to
provide!


>-----Original Message-----
>No need to install Win98. To do a clean install, either
boot the Windows
>2000 CD-Rom or setup disks. The set of four install disks
can be created
>from your Win2k CD-rom; change to the \bootdisk directory
on the cd-rom and
>execute makeboot.exe (from dos) or makebt32.exe (from 32
bit) and follow the
>prompts.
>
>When you get to the point, delete the existing NTFS and
or other partitions
>found. After you delete the partition(s) abort the
install, then again
>restart the pc booting the CD-Rom or setup disks to avoid
unexpected drive
>letter assignments with your new install.
>
>During Windows 2000 setup, at some point, will want to
confirm the previous
>operating system for the upgrade; at that point you'll
simply insert the
>qualified product install CD for it to verify. Then the
install will
>proceed.
>
>Check the pc, mb or hardware manufacturer's web site for
the latest bios and
>or Windows 2000 drivers for your devices.
>
>
>--
>Regards,
>
>Dave Patrick ....Please no email replies - reply in
newsgroup.
>Microsoft MVP [Windows NT/2000 Operating Systems]
>Microsoft Certified Professional [Windows 2000]
>http://www.microsoft.com/protect
>
>
>"Laurie" wrote:
>| Trying to upgrade the system from Win98 to Win 2000 and
in
>| the middle of the install it just locks - no error
message
>| no anything. Have reformated the drive, reinstalled win
>| 98 and try the upgrade to only lock up again.
>|
>| Anyone have any clues as to why this is happening? How
>| can I get around it?
>|
>| Thanks in advance!
>|
>| Cheers!
>
>
>.
>

Most likely some hardware is non-compliant or at least the driver isn't
included on the install CD-Rom. Try removing all non-essential hardware. Get
through the install, then ADD the hardware back in one-at-a-time using the
latest Windows 2000 driver from the manufacturer's web site.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect


<anonymous@discussions.microsoft.com> wrote:
| I am still locking up in the same place when installing
| Win 2000 directly. If I format and reinstall Win 98 I
| have no trouble whereas Win 2000 it locks with no error
| message. Could the Win 2000 disk be bad or??????
|
| Thanks so much for any assistance you may be able to
| provide!