0x0000007B stop

Hope somebody can help.

My computer failed and I moved my old hard disk on to my new computer. The
OS is Windows 2000 Pro and now I get a 0x0000007B stop error. I have loaded
W2000 fresh on to the disk into a new folder and that works fine, but I
would really like to get my old setup running again as it has taken a lot of
time getting it sorted. I have looked on the MS Kbase but not found anything
I haven't tried already (boot.ini etc). There must be a way!

Any guidance much appreciated.

Colin

Colin Jack wrote:
> Hope somebody can help.
>
> My computer failed and I moved my old hard disk on to my new computer. The
> OS is Windows 2000 Pro and now I get a 0x0000007B stop error. I have loaded
> W2000 fresh on to the disk into a new folder and that works fine, but I
> would really like to get my old setup running again as it has taken a lot of
> time getting it sorted. I have looked on the MS Kbase but not found anything
> I haven't tried already (boot.ini etc). There must be a way!

Basically the IDE driver on the new computer is a different one to the
old machine.
It is possible to get your old setup working by following the guide
below. (Personally I would work on getting a new setup done instead.)

http://65.24.134.81/KipSolutions/Mo...rd/MovingXP.htm

Ash.

Thanks Ash - I will have a go at that.


"Ashley Pride" <ashleypride@gmail.com> wrote in message
news:1114000138.18879.0@damia.uk.clara.net...
> Colin Jack wrote:
>> Hope somebody can help.
>>
>> My computer failed and I moved my old hard disk on to my new computer.
>> The OS is Windows 2000 Pro and now I get a 0x0000007B stop error. I have
>> loaded W2000 fresh on to the disk into a new folder and that works fine,
>> but I would really like to get my old setup running again as it has taken
>> a lot of time getting it sorted. I have looked on the MS Kbase but not
>> found anything I haven't tried already (boot.ini etc). There must be a
>> way!
>
> Basically the IDE driver on the new computer is a different one to the old
> machine.
> It is possible to get your old setup working by following the guide below.
> (Personally I would work on getting a new setup done instead.)
>
> http://65.24.134.81/KipSolutions/Mo...rd/MovingXP.htm
>
> Ash.