device is *Lexar Multi-Card reader (USB 2.0)*
w2k recognizes as generic USB mass storage device, Lexar claims w2k drivers
are incompatible so i downloded the Lexar drivers from their web site and
installed as directed.
it also directs that when you connect USB device then you are asked which
driver to load for the device which never happens any more
tried the (driver -> update driver -> specify location), problems here
though as is looking for INF file which is not in the drive downloads from
Lexar (just a setup file and some cabs etc)
btw the driver installs 4 separate removable drives for the single device
??? is this correct ?
i was expecting only *1* removable drive as the device warns about inserting
multiple cards
TA
rob
"Richard Harris" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> What kind of device is it? Do you have the drivers on CD or could you
> download thenm? If so - click on the driver tab of the device, choose
update
> and point it to the proper driver.
>
> Hopefully this will sort out your problem!
>
> Rich
>
> "robm" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > i erroneously connected USB device before installing drivers... w2k
found
> a
> > ?compatible? generic driver that it installed. i then installed the USB
> > device specific driver and deleted the USB devices installed by w2k
from
> > the "Device Manager->USB".
> >
> > when i re-connect USB device the old generic driver is loaded and
apperars
> > again in "Device Manager"
> >
> > how to fix so that w2k loads/assoc the device specific drivers with the
> USB
> > device ?
> >
> > TIA
> > rob
> >
> >
>
>
|
Similar Threads
