Telnet had IPV6 code in XPe. The Telnet Server tries to open a socket with
IPV6 address and if it fails it logs the eventlog you're seeing and tries
with IPV4 and will be successful.
This is not harmful. You can safely ignore the errors in the event viewer.
--
Andy
This posting is provided "AS IS" with no warranties, and confers no
rights.
=====================================================
>
> "Doug Hoeffel" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Andy:
> >
> > Thanks. It's most likely trivial since Telnet does in fact work.
> >
> > I'm just an Event Log purist so I like to try to resolve any stop sign
> that
> > I see in the event logs. Over time, I've resolved all but this one.
> >
> > ... Doug
> > "Andy Allred [MS]" <(E-Mail Removed)> wrote in message
> > news:ebxq$(E-Mail Removed)...
> > > I'll look into it and let you know, please be patient as it may take
at
> > > least a few days, but on the surface it appears to be a benign Winsock
> > > error.
> > >
> > > Andy
> > > --
> > >
> > > This posting is provided "AS IS" with no warranties, and confers no
> > rights.
> > > ==========================================================
> > >
> > >
> > > "Doug Hoeffel" <(E-Mail Removed)> wrote in message
> > > news:#(E-Mail Removed)...
> > > > No solution yet. It's a very low priority issue. I've got blue
> screen
> > > > issues to resolve right now...
> > > >
> > > > ... Doug
> > > > "max" <(E-Mail Removed)> wrote in message
> > > > news:(E-Mail Removed)...
> > > > > Hi Doug, have you resolve this problem? I've the same problem too
in
> > my
> > > > > WinXPE image!
> > > > > Thanks
> > > > >
> > > > > "Doug Hoeffel" <(E-Mail Removed)> ha scritto nel
> > > > messaggio
> > > > > news:(E-Mail Removed)...
> > > > > > Hello:
> > > > > >
> > > > > > I'm using XPe SP1 with the Telnet component. On every boot, the
> > > > following
> > > > > > error, with event id of 4053, appears in Application event log:
> > > > > > "WSAGetLastError() returned error: An address incompatible with
> the
> > > > > > requested protocol was used."
> > > > > >
> > > > > > This error appears immediately after the following informational
> > > > message:
> > > > > > "Telnet Service was started successfully."
> > > > > >
> > > > > > Does anyone know how to rid this message from the event log?
BTW,
> > > > Telnet
> > > > > > does work fine so there are no functional problems. I would
just
> > like
> > > > to
> > > > > > keep this message from constantly appearing in the event log.
> > > > > >
> > > > > > TIA... Doug H.
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
|
Similar Threads
