PC Review


Reply
Thread Tools Rate Thread

Re: slow boot/start up

 
 
Rich Barry
Guest
Posts: n/a
 
      17th Sep 2004
Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did you
install SP1 from Microsofts Windows Update site? Disconnect all your USB
devices and go back into device manager. At USB Controllers expand and
rt click and uninstall All of them. Restart and let WinXP reinstall them.
Then reconnect your USB devices. Also, do a good
check for virus, trojans, spyware and adware. You can use these
websites.

http://www.safer-networking.org/en/index.html



http://www.lavasoftusa.com/software/adaware/



http://www.kephyr.com/spywarescanner/index.html



http://housecall.trendmicro.com/







"stu8975" <(E-Mail Removed)> wrote in message
news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> hi, im having slow boot/start up probs,normally takes approx 5mins to get

to
> the log in screen..upon starting,my pc seems to be stuck on the first

screen
> when i turn it on (screen with all the system info...processor/ram

etc.),its
> normally stuck there for about 3-4 mins,then i get the windows xp

screen,then
> it goes blank for 1-2 mins before it gets to the log in screen...any
> suggestions???? bearing in mind im a novice...also dont know if this is
> related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> exclamation mark next to it..it says the device could not start..code
> 10...????? i have tried searching for driver/uninstall/roll back driver

etc
> but nothing seems to fix it.....much help is needed...cheers
>
> my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> --
> thanks
> stu8975



 
Reply With Quote
 
 
 
 
=?Utf-8?B?c3R1ODk3NQ==?=
Guest
Posts: n/a
 
      18th Sep 2004
hi there.i will try what you suggested,all drives etc were preinstalled when
i bought the pc,it has a seperate dvd rw,dvd rom,card reader,only have a
printer(epson r300) and scanner(canon lide 30) and webcam(logitech quickcam)
conneted via usb,no viruse show up (running norton int. sec 2004) and ad
aware 6.0,have installed sp1 and sp2 (auto updates) but had this problem
before they were installed...also awaitng feedback from manufacture regarding
this prob..
thanks

"Rich Barry" wrote:

> Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did you
> install SP1 from Microsofts Windows Update site? Disconnect all your USB
> devices and go back into device manager. At USB Controllers expand and
> rt click and uninstall All of them. Restart and let WinXP reinstall them.
> Then reconnect your USB devices. Also, do a good
> check for virus, trojans, spyware and adware. You can use these
> websites.
>
> http://www.safer-networking.org/en/index.html
>
>
>
> http://www.lavasoftusa.com/software/adaware/
>
>
>
> http://www.kephyr.com/spywarescanner/index.html
>
>
>
> http://housecall.trendmicro.com/
>
>
>
>
>
>
>
> "stu8975" <(E-Mail Removed)> wrote in message
> news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> > hi, im having slow boot/start up probs,normally takes approx 5mins to get

> to
> > the log in screen..upon starting,my pc seems to be stuck on the first

> screen
> > when i turn it on (screen with all the system info...processor/ram

> etc.),its
> > normally stuck there for about 3-4 mins,then i get the windows xp

> screen,then
> > it goes blank for 1-2 mins before it gets to the log in screen...any
> > suggestions???? bearing in mind im a novice...also dont know if this is
> > related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> > exclamation mark next to it..it says the device could not start..code
> > 10...????? i have tried searching for driver/uninstall/roll back driver

> etc
> > but nothing seems to fix it.....much help is needed...cheers
> >
> > my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> > --
> > thanks
> > stu8975

>
>
>

 
Reply With Quote
 
=?Utf-8?B?c3R1ODk3NQ==?=
Guest
Posts: n/a
 
      18th Sep 2004
hi again,i tried what you suggested but it doesnt fix the problem,all usb
controllers etc install correctly except for the 'usb 2.0 mass storage
device',it just says there was a problem with the installation,doesnt say
what the problem was...

"Rich Barry" wrote:

> Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did you
> install SP1 from Microsofts Windows Update site? Disconnect all your USB
> devices and go back into device manager. At USB Controllers expand and
> rt click and uninstall All of them. Restart and let WinXP reinstall them.
> Then reconnect your USB devices. Also, do a good
> check for virus, trojans, spyware and adware. You can use these
> websites.
>
> http://www.safer-networking.org/en/index.html
>
>
>
> http://www.lavasoftusa.com/software/adaware/
>
>
>
> http://www.kephyr.com/spywarescanner/index.html
>
>
>
> http://housecall.trendmicro.com/
>
>
>
>
>
>
>
> "stu8975" <(E-Mail Removed)> wrote in message
> news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> > hi, im having slow boot/start up probs,normally takes approx 5mins to get

> to
> > the log in screen..upon starting,my pc seems to be stuck on the first

> screen
> > when i turn it on (screen with all the system info...processor/ram

> etc.),its
> > normally stuck there for about 3-4 mins,then i get the windows xp

> screen,then
> > it goes blank for 1-2 mins before it gets to the log in screen...any
> > suggestions???? bearing in mind im a novice...also dont know if this is
> > related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> > exclamation mark next to it..it says the device could not start..code
> > 10...????? i have tried searching for driver/uninstall/roll back driver

> etc
> > but nothing seems to fix it.....much help is needed...cheers
> >
> > my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> > --
> > thanks
> > stu8975

>
>
>

 
Reply With Quote
 
Rich Barry
Guest
Posts: n/a
 
      18th Sep 2004
Stu, it looks like you don't have a USB 2.0 Mass Storage Device but somehow
XP is thinking you do. Go back into the
Device Manager and disable the USB 2.0 Mass Storage Device. Don't
uninstall it. Just choose disable. See what happens.

"stu8975" <(E-Mail Removed)> wrote in message
news:551BA2E0-91A6-4F8C-84DD-(E-Mail Removed)...
> hi again,i tried what you suggested but it doesnt fix the problem,all usb
> controllers etc install correctly except for the 'usb 2.0 mass storage
> device',it just says there was a problem with the installation,doesnt say
> what the problem was...
>
> "Rich Barry" wrote:
>
> > Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did

you
> > install SP1 from Microsofts Windows Update site? Disconnect all your

USB
> > devices and go back into device manager. At USB Controllers expand and
> > rt click and uninstall All of them. Restart and let WinXP reinstall

them.
> > Then reconnect your USB devices. Also, do a good
> > check for virus, trojans, spyware and adware. You can use these
> > websites.
> >
> > http://www.safer-networking.org/en/index.html
> >
> >
> >
> > http://www.lavasoftusa.com/software/adaware/
> >
> >
> >
> > http://www.kephyr.com/spywarescanner/index.html
> >
> >
> >
> > http://housecall.trendmicro.com/
> >
> >
> >
> >
> >
> >
> >
> > "stu8975" <(E-Mail Removed)> wrote in message
> > news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> > > hi, im having slow boot/start up probs,normally takes approx 5mins to

get
> > to
> > > the log in screen..upon starting,my pc seems to be stuck on the first

> > screen
> > > when i turn it on (screen with all the system info...processor/ram

> > etc.),its
> > > normally stuck there for about 3-4 mins,then i get the windows xp

> > screen,then
> > > it goes blank for 1-2 mins before it gets to the log in screen...any
> > > suggestions???? bearing in mind im a novice...also dont know if this

is
> > > related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> > > exclamation mark next to it..it says the device could not start..code
> > > 10...????? i have tried searching for driver/uninstall/roll back

driver
> > etc
> > > but nothing seems to fix it.....much help is needed...cheers
> > >
> > > my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> > > --
> > > thanks
> > > stu8975

> >
> >
> >



 
Reply With Quote
 
Rich Barry
Guest
Posts: n/a
 
      18th Sep 2004
Stu, if there's no option to disable then just uninstall.
"stu8975" <(E-Mail Removed)> wrote in message
news:551BA2E0-91A6-4F8C-84DD-(E-Mail Removed)...
> hi again,i tried what you suggested but it doesnt fix the problem,all usb
> controllers etc install correctly except for the 'usb 2.0 mass storage
> device',it just says there was a problem with the installation,doesnt say
> what the problem was...
>
> "Rich Barry" wrote:
>
> > Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did

you
> > install SP1 from Microsofts Windows Update site? Disconnect all your

USB
> > devices and go back into device manager. At USB Controllers expand and
> > rt click and uninstall All of them. Restart and let WinXP reinstall

them.
> > Then reconnect your USB devices. Also, do a good
> > check for virus, trojans, spyware and adware. You can use these
> > websites.
> >
> > http://www.safer-networking.org/en/index.html
> >
> >
> >
> > http://www.lavasoftusa.com/software/adaware/
> >
> >
> >
> > http://www.kephyr.com/spywarescanner/index.html
> >
> >
> >
> > http://housecall.trendmicro.com/
> >
> >
> >
> >
> >
> >
> >
> > "stu8975" <(E-Mail Removed)> wrote in message
> > news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> > > hi, im having slow boot/start up probs,normally takes approx 5mins to

get
> > to
> > > the log in screen..upon starting,my pc seems to be stuck on the first

> > screen
> > > when i turn it on (screen with all the system info...processor/ram

> > etc.),its
> > > normally stuck there for about 3-4 mins,then i get the windows xp

> > screen,then
> > > it goes blank for 1-2 mins before it gets to the log in screen...any
> > > suggestions???? bearing in mind im a novice...also dont know if this

is
> > > related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> > > exclamation mark next to it..it says the device could not start..code
> > > 10...????? i have tried searching for driver/uninstall/roll back

driver
> > etc
> > > but nothing seems to fix it.....much help is needed...cheers
> > >
> > > my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> > > --
> > > thanks
> > > stu8975

> >
> >
> >



 
Reply With Quote
 
=?Utf-8?B?RGFkZHlSYXk=?=
Guest
Posts: n/a
 
      4th May 2005


"Rich Barry" wrote:

> Do you have a USB 2.0 External Hard Drive or CDR-W Burner? If so did you
> install SP1 from Microsofts Windows Update site? Disconnect all your USB
> devices and go back into device manager. At USB Controllers expand and
> rt click and uninstall All of them. Restart and let WinXP reinstall them.
> Then reconnect your USB devices. Also, do a good
> check for virus, trojans, spyware and adware. You can use these
> websites.
>
> http://www.safer-networking.org/en/index.html
>
>
>
> http://www.lavasoftusa.com/software/adaware/
>
>
>
> http://www.kephyr.com/spywarescanner/index.html
>
>
>
> http://housecall.trendmicro.com/
>
>
>
>
>
>
>
> "stu8975" <(E-Mail Removed)> wrote in message
> news:E3E279A5-5B61-4FCE-B986-(E-Mail Removed)...
> > hi, im having slow boot/start up probs,normally takes approx 5mins to get

> to
> > the log in screen..upon starting,my pc seems to be stuck on the first

> screen
> > when i turn it on (screen with all the system info...processor/ram

> etc.),its
> > normally stuck there for about 3-4 mins,then i get the windows xp

> screen,then
> > it goes blank for 1-2 mins before it gets to the log in screen...any
> > suggestions???? bearing in mind im a novice...also dont know if this is
> > related,in device manager,my ''USB 2.0 MASS STORAGE DEVICE'' has an
> > exclamation mark next to it..it says the device could not start..code
> > 10...????? i have tried searching for driver/uninstall/roll back driver

> etc
> > but nothing seems to fix it.....much help is needed...cheers
> >
> > my pc is a MEDION - PCMT6, running xp home,amd athlon 3200+,512ram
> > --
> > thanks
> > stu8975

>
>
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Programs Slow to Start with Cold Boot K2NNJ Windows XP Help 3 10th Nov 2008 03:24 AM
Slow first start of a program after boot up. Picsoetje Windows Vista General Discussion 1 22nd Jan 2008 12:03 AM
bootvis / slow boot and start rudolf bladt Windows XP Help 0 9th Dec 2006 03:52 PM
Slow Start (Boot Log) Don Windows XP General 13 27th Sep 2006 05:49 AM
slow boot/start up =?Utf-8?B?c3R1ODk3NQ==?= Windows XP New Users 0 17th Sep 2004 11:25 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 05:23 AM.