You might try reading the following:

http://www.sandisk.com/pdf/oem/AppNoteCFHostv1.0.pdf

This helps with optimizing CF for host operation. Also, if you are using
EWF, make sure the CF is not marked
"removable" Here is an article on that:
http://groups.google.com/groups?q=Co...oft.com&rnum=1


HTH,
JC

--
JC- BSquare Corp.
If you wish to reply directly to me, remove the <nospam_ > from the address.
"Ju" <(E-Mail Removed)> wrote in message
news:08368412-3BCE-45DA-8767-(E-Mail Removed)...
>I have XP Embedded running on a SanDisk compact flash with EWF. Occationaly
> in the windows system event log, there are atapi error ID 9. And sometime
> in
> a worst case scenario atapi error id 11 and 26 occurs. Does anybody know
> of
> firmware or controller conflict in xp embedded for CF? Or is this normal
> operation?
>
> Thank you.
>
> Ju

Hum, I run RAM EWF and I do FBA on the CF - My development CF and I have
used it for a year without any problems. It's not marked as fixed either.


"JC" <JCBSQ@nospam_yahoo.com> wrote in message
news:(E-Mail Removed)...
> You might try reading the following:
>
> http://www.sandisk.com/pdf/oem/AppNoteCFHostv1.0.pdf
>
> This helps with optimizing CF for host operation. Also, if you are using
> EWF, make sure the CF is not marked
> "removable" Here is an article on that:
>
http://groups.google.com/groups?q=Co...oft.com&rnum=1
>
>
> HTH,
> JC
>
> --
> JC- BSquare Corp.
> If you wish to reply directly to me, remove the <nospam_ > from the
address.
> "Ju" <(E-Mail Removed)> wrote in message
> news:08368412-3BCE-45DA-8767-(E-Mail Removed)...
> >I have XP Embedded running on a SanDisk compact flash with EWF.
Occationaly
> > in the windows system event log, there are atapi error ID 9. And
sometime
> > in
> > a worst case scenario atapi error id 11 and 26 occurs. Does anybody know
> > of
> > firmware or controller conflict in xp embedded for CF? Or is this normal
> > operation?
> >
> > Thank you.
> >
> > Ju
>
>